• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.518-519
• /
• 2014

The smartphone of pen input device makes a stage appearance by the development of the latest technology. Such smartphone chooses both touch method using hand and pen input device simultaneously. This research try to conduct usability evaluation in order to find the user's preference between pen input and touch input method. We recruit five novices and five expert for it. We presented all participants the task of touch input and pen input in series. This research conducts the unstructured interview after doing tasks as a pilot study. As a result, we found that it was influenced according to the feature of the task. However, most of the participants prefer to do touch method overall. Specially the result of this research reveals that the novice group prefers the pen input method. We expect to suggest the design guideline for product development to extend pen input method in smartphone.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1060-1063
• /
• 1996

Remote Cask Grappling and Lid Unbolting Device (RCGLUD) is developed as a dedicated device capable of performing complete procedure of handling nuclear spent fuel transport cask. Since RCGLUD is suspended to an overhead crane, its body should undergo prolonged vibration upon actuation in rotational direction and it becomes difficult to achieve precise grappling of the cask. Therefore, this paper presents an adaptation of input shaping technique to effectively suppress the rotational vibration of RCGLUD and achieve precise positioning in rotational direction. This technique has a practical merit in that it requires only the information on the system natural frequency and the damping ratio. Its performance is verified by both simulation and experimental studies, and revealed that the method is also insensitive to modeling error.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.424-432
• /
• 2009

This paper discusses about the implementation of a simulator for the Navigation Control System(NCS) of bimodal tram. To operate a NCS of bimodal tram, values of all sorts of sensors installed in bimodal tram should be transmitted to the NCS, and the NCS calculates the measured sensor values to determine traveling direction, traveling speed, current position etc. The implementation of the simulator consists of a device applying driver's input transaction function & virtual sensor program and a sub-rack device that controls communication with the NCS to evaluate navigation control function. The virtual sensor program can create routes (map), traveling profiles & seat information et cetera in order to transmit to the NCS, analyzes driver's input values and NCS output values to create virtual sensor values. The sub-rack device takes charge of communication with the NCS using CAN-OPEN, CAN-J1939, MVP protocols. This paper discusses about the implementation of the simulator and afterwards analyzes and evaluates the NCS simulation results.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.2
• /
• pp.189-200
• /
• 2012

With increasing the number of smart device such as Tablet PC, smart phone and netbook, information security which based on smart device in mobile environment have become the issue. It is important to enter a password safety. In various types of mobile devices, because of hardware limitation of device, it is difficult that to equip secondary input device such as keyboard and mouse. Also, a loss of accuracy becomes a problem because input information was entered by touch screen. Because of problem mentioned above it can be predicted to change password scheme text based password scheme to graphical password scheme, graphical password scheme is easy to use and is resistant to shoulder surfing attack. So this paper proposes new graphical password scheme based 5 strokes which are made by decomposed the Korean to defend against shoulder surfing attack.

• Journal of Information Processing Systems
• /
• v.3 no.1
• /
• pp.16-20
• /
• 2007

This paper describes the development of the sensor interface and driver program for a point of care (POC) device. The proposed pac device comprises an ARM9 embedded processor and eight-channel sensor input to measure various bio-signals. It features a user-friendly interface using a full-color TFT-LCD and touch-screen, and a bluetooth wireless communication module. The proposed device is based on the system on a programmable chip (SOPC). We use Altera's Excalibur device, which has an ARM9 and FPGA area on a chip, as a test bed for the development of interface hardware and driver software.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1039-1044
• /
• 2005

A Multi-channel serial device using the embedded Linux system is designed for a remote controlling and monitoring system. The proposed device consists of a FIFO, a state machine, and an interrupter. The device program written in embedded Linux enables the effective programming of device. While the conventional multi-channel serial devices accesses every individual serial devices, the proposed device accesses the multi-channel serial device as if it is a single serial device. The device efficiently performs the multi-channel serial input/output operation and has fast access time than the conventional multi-channel serial device.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10b
• /
• pp.526-528
• /
• 2004

본 논문은 센서 네트워크 환경에서 사용자 센싱을 통한 입력장치인 MGlove (Multiple-sensing Clove)의 구현에 대해 기술한다. 본 입력장치는 버튼 없이 2축 가속 센서, 2축 자기 센서, 포토 다이오드의 세 가지 종류의 센서를 사용하여 사용자의 손동작을 통해 입력을 감지하고 RF 모듈을 이용하여 무선으로 통신 가능하다. 구현한 MGlove는 유비 쿼터스 센서 네트워크 환경을 위한 입력 장치로 context-aware input device로의 발전 가능성이 있으며, 센서 추적 기법을 통해 사용자의 자세, 위치, 방향에 관계없이 입력 가능하고 RF모듈을 통해 먼 거리에서도 조작이 가능한 특징을 가진다.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.379-380
• /
• 2006

As a result of growth sensor-enabled mobile devices such as PDA, cellular phone and other computing devices, in recent years, users can utilize the diverse digital contents everywhere and anytime. However, the interfaces of mobile applications are often unnatural due to limited resources and miniaturized input/output. Especially, users may feel this problem in some applications such as the mobile game. Therefore, Novel interaction forms have been developed in order to complement the poor user interface of the mobile device and to increase the interest for the mobile game. In this paper, we describe the demonstration of the gesture and posture input supported by an accelerometer. The application example we created are AM-Fishing game on the mobile device that employs the accelerometer as the main interaction modality. The demos show the usability for the gesture and posture interaction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1103-1108
• /
• 2016

The development of a variety of sensor technology, users smart phone, the use of motion recognition apparatus such as a console game machines is increasing. It tends to user needs motion recognition-based input device are increasing. Existing motion recognition mouse is equipped with a modified form of the mouse button on the outside and serves as a wheel mouse left and right buttons. Existing motion recognition mouse is to manufacture a small, there is a difficulty to operate the button. It is to apply the motion recognition technology the motion recognition technology is used only pointing the cursor there is a limit. In this paper, use of MEMS-based motion recognition sensor, the body of the two-point operation data by recognizing the operation of the (thumb and forefinger) and generating a control signal, followed by studies on the generated control signal to a wireless transmitting computer input device.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.191-198
• /
• 2022

The most basic thing to measure the condition of a companion animal is to check the breathing and pulse. There are several methods to measure the breathing and pulse of a companion animal, and the PPG method is generally used to measure the oxygen saturation (SpO₂) in a companion animal. However, since the input PPG signal is inputted with various information as well as oxygen saturation, it is necessary to separate and extract oxygen saturation information from the PPG signal in order to measure the oxygen saturation. Therefore, in this paper, a wearable measuring device for companion animals that can be measured by applying the PPG method was designed and implemented, and an algorithm for separating oxygen saturation information from the PPG signal input through the wearable measuring device was proposed.