• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.281-286
• /
• 2007

Road traffic accidents kill more than one million people a year. ESCC represents a new device, that hasn't any analogue. This embedded system, heats the car glasses, when it's needed, that makes more safety driving. It's build on Atmega128L CPU, using high-performance EEPROM CPLD ATF1504AS. Source code was written in C language. Algorithm of work was written by dew-point table. This system is not only clearing the glass from condensation, but averts condensation. ESCC began working, when input information became close to dew-point table information. Thankful this device, field of view is more widely, that increase safety level.

• Journal of Sensor Science and Technology
• /
• v.21 no.1
• /
• pp.21-27
• /
• 2012

In this study, we designed an embedded system for automatic condensation control(ESCC) of the car. This system heats the car glasses as and when it is needed that makes driving safer and convenient. The system was built on an ATmega128L central processing unit(CPU), using high-performance electrically erasable programmable read-only memory(EEPROM) complex programmable logic device(CPLD) ATF1504AS, using which an ESCC algorithm has been proposed. The source code was written in C language. The algorithm of work was written using the dew-point table. This system not only clears the condensation on the glass but also averts condensation. The designed ESCC system begins working once the input information comes close to the dew-point table information. This device enables a wider field of view, thereby increasing safety.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.1121-1133
• /
• 1998

In this paper, a new method is proposed for a simple andaccurate design of larage-sigal power amplifier using the output current- and volage- waveform analysis. An existing high-efficiency theory, Harmonic Loading, is modified to apply to a real device, and the notion of "actual bias point at large-signal input" is proposed. Based on the proposed theory, 2GHz band poweramplifier is implemented using HEMT device, and the implemented amplifier shows 14dBm output power, 46% drain efficienty, 38% power-added efficiency and 7.8dB gain at 2V bias voltage.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.1-9
• /
• 2012

Decisions on reliability screening rules and burn-in policies are determined based on the estimated reliability. The variability in a semiconductor manufacturing process does not only causes quality problems but it also makes reliability estimation more complicated. This study investigates the nonuniformity characteristics of integrated circuit reliability according to defect density distribution within a wafer and between wafers then develops optimal burn-in policy based on the estimated reliability. New reliability estimation model based on yield information is developed using a spatial stochastic process. Spatial defect density variation is reflected in the reliability estimation, and the defect densities of each die location are considered as input variables of the burn-in optimization. Reliability screening and optimal burn-in policy subject to the burn-in cost minimization is examined, and numerical experiments are conducted.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.282-286
• /
• 2005

Contents of these treatise propose method to embody station addition and passivity point correction. That store in TCMS's memory being downloaded all train running path data that is consisted of name of station and station code, departure station, destination station, train number, running time through PCMCIA memory card. Search relevant running path data and current station, destination station, the next station start time present to TCMS's display. In case it is no received information of station, device that do function of passenger broadcasting and pilot light does not act. This time, if input information of current station, relevant device does point revision.

• Asia-pacific Journal of Convergent Research Interchange
• /
• v.4 no.2
• /
• pp.1-12
• /
• 2018

Nowadays, the advent of smart devices equipped with the latest input technologies has changed the way users interact with smart devices. The gesture based user interface, as the natural user interface technologies, has attracted a lot of attention from researchers and developers. Gestures can be constituted in different ways; touching a screen, moving a pointing device, or making hand or body movements in a three-dimensional (3D) space. The various gesture input devices make application developers to maintain multiple source code families for the same applications adapting different gesture input devices. In this paper, we defined the gesture interface markup language (GIML) based on extensible markup language (XML) to describe gestures independently of the input devices. It also provides constraints necessary to determine which gesture has occurred and information required when UGesture platform interact with the gesture based application. The proposed GIML is based on our previous implemented the UGesture platform and the evaluation results, and so the GIML can be used to define new gestures for the UGesture platform and support new input hardwares.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.6
• /
• pp.51-58
• /
• 2002

In this paper, a 155/311 Mb/s MUX/DEMUX chip using ECL macrocell away has been developed with a single device. This device for a 2.5 Gb/s SDH based transmission system is to interleave the parallel data of 51 Mb/s into 155 Mb/s(or 311 Mb/s) serial data output, and is to interleave a serial input bit stream of 155 Mb/s(or 311 Mb/s) into the parallel output of 51 Mb/s. The input and output of the device ate TTL compatible at the low-speed end, but 100k ECL compatible at the high-speed end. The device has been fabricated with Motorola ETL3200 macrocell away The fabricated chip shows the typical phase margin of 180 degrees and output data skew less than 220ps at the high-speed end.

• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.1
• /
• pp.29-34
• /
• 2022

We propose a novel network architecture and build dataset for recognizing clickable objects on mobile device screens. The data was collected based on clickable objects on the mobile device screen that have numerous resolution, and a total of 24,937 annotation data were subdivided into seven categories: text, edit text, image, button, region, status bar, and navigation bar. We use the Deconvolution Single Shot Detector as a baseline, the backbone network with Squeeze-and-Excitation blocks, the Single Shot Detector layer structure to derive inference results and the Feature pyramid networks structure. Also we efficiently extract features by changing the input resolution of the existing 1:1 ratio of the network to a 1:2 ratio similar to the mobile device screen. As a result of experimenting with the dataset we have built, the mean average precision was improved by up to 101% compared to baseline.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2113-2118
• /
• 2016

Smart Jewelry is applied to the components of the Internet of Things. The process of obtaining the status information to the input of the sensor. And it controls the light color of the LED. Because to express the beauty of twinkling lights that can be felt in the jewelery and aesthetic functions were applied in order to feel the mystery. Smart Jewelry is capable of communication, interaction, wearable. Smart jewelery was equipped with a color, temperature, ambient light sensor. It was designed to allow interaction with a Bluetooth module. Applying an algorithm so that the light jewelry colors can vary depending on the circumstances of the smart jewelry wearer had been implemented by the mobile application. It can be realized in digital technology and the convergence of life. It presents the orientation development of the smart jewelery device on IoT environment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.155-165
• /
• 2001

By suggesting a mixed-mode transient simulation method utilizing a 2-dimensional device simulator, we have analyzed CDM ESD Phenomena in CMOS chips, which utilize NMOS transistors as ESD protection devices. By analyzing the simulation results, the mechanisms leading to device failures in CDM discharge and the differences in discharge characteristics with different polarities of stored charges have been explained in detail. The effects of changes in interconnection resistance values on the gate-oxide failure at input buffers, which is the most serious problem in CDM discharge, have been examined. Also improvements in discharge characteristics with addition of the NMOS transistor for input-buffer protection have been examined.