• Annual Conference of KIPS
• /
• 2017.04a
• /
• pp.677-679
• /
• 2017

Data convergecast is an indispensable task for any WSN applications. Typically, scheduling in the WSN consists of two phases: tree construction and scheduling. The optimal tree structure and scheduling for the network is proven NP-hard. This paper focuses on the delay optimality while constructing the data convergecast tree. The algorithm can take any tree as the input, and by performing the switches (i.e. a node changes its parent), the expected aggregation delay is potentially reduced. Note that while constructing the tree, only the in-tree collisions between the child nodes sending data to their common parent is considered.

• The Journal of Information Technology
• /
• v.10 no.3
• /
• pp.47-58
• /
• 2007

In this paper, we designed and manufactured the distortion-cancellation module which is able to compensate thermal-noise distortion by software. The distortion-cancellation algorithm not only bring forth system non-linear distortion by input level but also bring compensate component of distortion by thermal to get rid off distortion from now on. After TMS 320C6711 DSP to recognize our algorithm, we manufactured the module for every kinds of system. To evaluate efficiency of the distortion-cancellation module, we designed and manufactured communication system. By measured result, if system output power is -3dBm equally, 12dB of ACLR has improved in 1MHz away from a center frequency, and also gain has increased up to 0.5dB.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2344-2353
• /
• 2018

A coupled recursive total least squares (CRTLS) algorithm is proposed for parameter estimation of permanent magnet synchronous machines (PMSMs). TLS considers the errors of both input variables and output ones, and thus achieves more accurate estimates than standard least squares method does. The proposed algorithm consists of two recursive total least squares (RTLS) algorithms for the d-axis subsystem and q-axis subsystem respectively. The incremental singular value decomposition (SVD) for the RTLS obtained by an approximate calculation with less computation. The performance of the CRTLS is demonstrated by simulation and experimental results.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.241-243
• /
• 2010

Previous approaches to the 2D to 3D conversion problem require heavy computation or considerable amount of user input. In this paper, we propose a rather simple method in estimating the depth map from a single image using a monocular depth cue: haze. Using the haze imaging model, we obtain the distance information and estimate a reliable depth map from a single scenery image. Using the depth map, we also suggest an algorithm that converts the single image to 3D stereoscopic images. We determine a disparity value for each pixel from the original 'left' image and generate a corresponding 'right' image. Results show that the algorithm gives well refined depth maps despite the simplicity of the approach.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.147-159
• /
• 2002

This paper proposes a method to recognize the noisiness of road images connected with the extraction of lane-related information in order to prevent the usage of erroneous information. The proposed method uses a fuzzy neural network(FNN) with the back-Propagation loaming algorithm. The U decides road images good or bad with respect to visibility of lane marks on road images. Most input parameters to the FNN are extracted from an edge distribution function(EDF), a function of edge histogram constructed by edge phase and norm. The shape of the EDF is deeply correlated to the visibility of lane marks of road image. Experimental results obtained by simulations with real images taken by various lighting and weather conditions show that the proposed method was quite successful, providing decision-making of noisiness with about 99%.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.204-206
• /
• 2008

In this paper, we proposed the recognition method that automatically extracts cracks from a surface image acquired by a digital camera and recognizes the directions (horizontal, vertical, -45 degree, and 45 degree) of cracks using the fuzzy single layer perceptron. We compensate an effect of light on a concrete surface image by applying the closing operation, which is one of the morphological techniques, extract the edges of cracks by Sobel masking, and binarize the image by applying the iterated binarization technique. Two times of noise reduction are applied to the binary image for effective noise elimination. After the specific regions of cracks are automatically extracted from the preprocessed image by applying Glassfire labeling algorithm to the extracted crack image, the cracks of the specific region are enlarged or reduced to $30{\times}30$ pixels and then used as input patterns to the fuzzy single layer perceptron. The experiments using concrete crack images showed that the cracks in the concrete crack images were effectively extracted and the fuzzy single layer perceptron was effective in the recognition of the extracted cracks directions.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.105-108
• /
• 1996

In this paper, we present an interpolation schema for image resolution enhancement using fuzzy logic. Proposed algorithm can recover both low and high frequency information in image data. In general, interpolation techniques are based on linear operators which are essentially details in the original image. In our fuzzy approach, the operator itself balances the strength of its sharpening and noise suppressing components according to the properties of the input image data. The proposed interpolation algorithm is performed in three step. First logic reasoning is applied to coarsely interpret the high frequency information. These results are combined to obtain the optical output. Using our approach, resolution of the original image can be applied to various kind of image processing topics such as image enhancement, subpixel edge detection, and filtering.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.6 s.44
• /
• pp.151-156
• /
• 2006

This paper presents an background edge generation based automatic algorithm for detection of moving objects under moving camera. Background image is generated by rotating the fixed the camera on the tripod horizontally, aligning and reorganizing this images. We develop an efficient approach for robust panoramic background edge generation as well as method of edge matching between input image and background image. We applied the proposed algorithm to real image sequences. The proposed method can be successfully realized in various monitoring systems like intrusion detection as well as video surveillance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1500-1505
• /
• 1999

In this paper, we presented the stereo algorithm for 3-D object recognition. In order to solve the problem for matching time in existed methods, we proposed the method which used the moving direction vector. On the other hand, after we extracted the moving vectors by moving direction of objects, rotated object was matched on axis of it. Using the Hough transform, we obtained the 2-D synthesed image as reference images corresponding to the rate of moving, and then compared with the unknown input images.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.420-423
• /
• 2001

In this paper, the Multi-FNNs(Fuzzy-Neural Networks) architecture is identified and optimized using HCM(Hard C-Means) clustering method and genetic algorithms. The proposed Multi-FNNs architecture uses simplified inference and linear inference as fuzzy inference method and error back propagation algorithm as learning rules. Here, HCM clustering method, which is carried out for the process data preprocessing of system modeling, is utilized to determine the structure of Multi-FNNs according to the divisions of input-output space using I/O process data. Also, the parameters of Multi-FNNs model such as apexes of membership function, learning rates and momentum coefficients are adjusted using genetic algorithms. An aggregate performance index with a weighting factor is used to achieve a sound balance between approximation and generalization abilities of the model. To evaluate the performance of the proposed model we use the time series data for gas furnace and the NOx emission process data of gas turbine power plant.