• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.654-659
• /
• 2010

In this paper, we propose a new frequency allocation method for improvement of edge and low 5% user throughputs. Although many kinds of inter cell interference mitigation methods have been proposed, those have still high complexity of implementation. The proposed algorithm has lower complexity and higher edge user throughput than conventional algorithms since the same frequency allocation method is applied in all cell. Finally, we analyze and compare the edge and low 5% user throughputs using a system level simulation (SLS).

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.12
• /
• pp.691-699
• /
• 2004

SRM(Switched Reluctance Motor) drives require the accurate position information of the rotor. These informations are generally provided by a tacho generator or digital shaft-position encoder These speed sensors lower the system reliability and require special attention to noise. This paper describes a new approach to estimating SRM speed from measured terminal voltages and currents for speed sensorless control. The described method is based on the sliding mode observer. The rotor speed and position observers are estimated by the adaptation law using the real and estimated currents. However, the conventional adaptive sliding mode observer based on the variable structure control theory has some disadvantages that the estimated values including the high-frequency chattering and the steady state error generated due to the infinite feedback gain chosen and the discontinuous control input. To reduce the chattering and steady state error, an integrator is also inserted in the sliding mode observer strategy. The described adaptive sliding mode observer decreases the vibration to the switching hyper-plane of the sliding mode by adding integrator. The described methodology incorporates the Lyapunov algorithm to drive the rotor speed and the stator resistance such that it can overcome the problem of sensitivity in the face of SRM parameter variation. Also, without any mechanical information. The rotor speed of SRM is obtained form adaptive scheme. The described method is verified through the simulation and experiment.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.3
• /
• pp.35-46
• /
• 1999

A derotator VLSI which compensates for the frequency and phase errors of a received signal in digital communication systems was developed employing a CORDIC algorithm. The CORDIC circuit directly rotates the input signal according to the phase error information, thus is much simpler than the conventional derotator architecture which consists of a DDFS (Direct Digital Frequency Synthesizer) and a complex multiplier. Since a derotator needs only small phase error accumulation, a fast direction sequence generation method which exploits the linearity of the arctangent function in small angles is utilized in order to enhance the operating speed. The chip was designed and implemented using a $0.6\mu\textrm{m}$ triple metal CMOS process by the full custom layout method. The whole chip size is $6.8\textrm{mm}^2$ and the maximum operating frequency is 25 MHz.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.135-141
• /
• 2004

Image interpolation is an image enlargement method that calculates an empty pixel value using the information of given pixel values. Since a natural image is composed of various spatial frequency components, it is difficult for one method to interpolate pixels with various spatial frequencies. In this paper, we propose an image interpolation method using multiple neural networks with spatial frequency characteristic. Input image is segmented according to spatial frequency by local variance, and each segmented image is interpolated using neural network established for spatial frequency band. The proposed method is applied to line doubling that becomes an important part in image interpolation because of deinterlacing. In simulation the proposed algorithm shows the improved PSNR result compared with conventional algorithms and method using single neural network.

• Journal of Information Technology Application
• /
• v.3 no.2
• /
• pp.1-24
• /
• 2001

This purpose of this study is to drive important criteria for improving customer relationship of R institute using data mining techniques. The focus of this research is to consider patterns and interactions of research variables from research management database of R institute, and to classify the outside organizations and the inside organizations for research contract organizations, and to decide the directions of customer relationship management through analyzing the research type and research cost of research topics. In order to drive criteria variables through pattern analysis of the research database, decision tree algorithm is employed. The results show that determinant variables of 17 input variables are research period, overhead cost, R ＆ D cost as variables to classify the outside and inside contract organization.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.2 s.34
• /
• pp.59-68
• /
• 2005

Object tracking in a real time image is one of interesting subjects in computer vision and many practical application fields Past couple of years. But sometimes existing systems cannot find object by recognize background noise as object. This paper proposes a method of object detection and tracking using adaptive background image in real time. To detect object which does not influenced by illumination and remove noise in background image, this system generates adaptive background image by real time background image updating. This system detects object using the difference between background image and input image from camera. After setting up MBR(minimum bounding rectangle) using the internal point of detected otject, the system tracks otiect through this MBR. In addition, this paper evaluates the test result about performance of proposed method as compared with existing tracking algorithm.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.25-32
• /
• 2007

In this paper, a new method for first order plus dead time(FOPDT) model identification is proposed, which can identity multiple points on a process step response in terms of classification of time response. The process input and output to the test are decomposed into the transient part and the steady-state part. The steady-state part express one FOPDT model and the transient part express variously FOPDT model using least square estimation method. The optimum parameter tuning algorithm for PID controller of the Smith Predictor is proposed through ITAE as performance index. The Simulation results show the validity and improvement of performance for various processes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.111-113
• /
• 2012

KINECT is a gesture recognition camera produced by Microsoft Corp. KINECT SDK are widely available and many applications are actively being developed. Especially, KIET (Kinect Image Extraction Technique) has been used mainly for extracting moving objects from the input image. However, KIET has difficulty in extracting the human head due to the absorption of light. In order to overcome this problem, this paper proposes a new method for improving the KIET performance by using both color-image and depth image. Through experimental results, it is shown that the proposed method performs better than the conventional KIET algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.1
• /
• pp.47-57
• /
• 1992

Subject of this work is the application of neural networks for the signal(motor noise)recognition systems which detects motor failures and employs different signal(noise). Charaoteristics that re-sult from damaghe part and measure of motor construction during working. The four layers neural networks is applied to this examination. And consists of one input layer, two hidden layers, and one output layer, and learns by the back propagation algorithm.The results of this examination show that it the construction and the output power of the testmotor and learning motor are compatible, the damaged part of the testmotor are detected correctly in the system on the other hand, if the motors have different constrcotion but similar output power each other, mislesding results are obtained in this system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8A
• /
• pp.601-611
• /
• 2012

In this paper, we first study the spatial multiplexing gain for the 3-cell interfering broadcast channels (IFBC) where all base stations and mobile users are equipped with multiple antennas. Then, we present the IA scheme in conjunction with user selection which outperforms the TDMA technique in the IFBC environment. The optimal scheduling method utilizes multiuser diversity to achieve a significant fraction of sum capacity by using an exhaustive search algorithm. To reduce the computational complexity, a suboptimal scheduling method is proposed based on a coordinate ascent approach.