• Journal of Korea Multimedia Society
• /
• v.18 no.12
• /
• pp.1475-1482
• /
• 2015

In network routers, buffers are used to resolve congestion and reduce packet loss rate whenever congestion occurs at bottleneck link. Most of the existing methods to manage such buffers focus only on queue-length-based control as one loop which have some issues of low link utilization and system stability. In this paper, we propose a novel framework which exploits two-loop control method, e.g. queue-length and congestion window size, combined with optimal margin method to facilitate parameter choices. Simulation results in ns-2 demonstrate that bottleneck link performance can be improved with higher link utilization (85%) and shorter queue length (22%) than the current deployed scheme in commercial routers (RED and DropTail).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.6
• /
• pp.538-548
• /
• 2014

This study provides a robust control of a grid-connected three-phase two-level photo voltaic inverter. The introduced control method uses the cascade control strategy to regulate AC-side current and DC-link voltage. A robust controller with integration action is used for the inner-loop AC-side current control, which maximizes the convergence rate using a linear matrix inequality-based optimization design method and eliminates the offset error. The robust controller design method considers the parameter uncertainty set to accommodate parameter mismatch and un-modeled components in the inverter model. An outer-loop proportional-integral controller is used to regulate DC-link voltage with linearization of DC/AC relation. The proposed control strategy is applied to a grid-connected 100 kW photo voltaic inverter.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.1
• /
• pp.67-77
• /
• 1996

Total suspended particulate matters (TSP) were collected based on a size segregation method by a cascade impactor for 6 consecutive years (form Dec. 1989 to sep. 1994) in the Kyung Hee University-Suwon Campus, and 6 trace metals (Ca, Si, Fe, Pb, Cu, Zn) were determined by an x-ray fluorescence spectroscopy. Total number of samples collected during the study are 118 sets and each set of sample comsists of 9 filters. The levels of TSP and 6 trace metals were then used to examine seasonal and annual variations with respects to their size distributions. For statistical analyses, raw data were initially transformed by both logarithmic and root transformating to approximately normalize them, and then size distribution functions for each trace element were separately developed season-to-season by a regression analysis in order to obtain maximum amount of physical information, Subsequently, each developed model was verified by comparing with supervised data collected on 1994. The result showed that each prediction model was in good agreement except the fall, partly due to lack of the data collected on fall, 1994.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.663-672
• /
• 2007

The mutual separation behavior of actinides and rare earths in a countercurrent multistage reductive extraction system was predicted by computer calculation. The distribution information for actinides and rare earths in the reductive extraction systems of LiCl-KCl/Cd and LiCl-KCl/Bi was collected from literature and then it was used for the calculation of a multistage extraction. The results of the concentration profiles throughout the extraction cascade, recovery yields of various metal solutes, and separation factors between the actinides and rare earths were calculated. The effects of the major process parameters, such as reducing agent content in the metal phase, number of stages, and salt/metal flow ratio, etc., on the extraction behavior were also examined.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.5
• /
• pp.103-110
• /
• 1998

In this paper we propose various rotation block realization method of MIMO LBR system. For this, we first discuss how to realize a given LBR system in the form of LBR two-pair cascades. Then we examine several systematic extraction procedures which enable to realize each LBR two-pair in the form of rotation block. Then we consider which realization methods we select for each two-pair block in view of the dynamci range of the coefficients of the rotation blocks. Finally, we demonstrate the LBR realization method using a detailed numerical example that converts a 4th order IIR filter function into a 4*4 transform domain transfer matrix, and then realizes it in a rotation-block cascade.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.3
• /
• pp.34-42
• /
• 1993

An analytic approach to wide-band amplification using simplified equivalent MESFET modeling has enabled an ultrabroad-band flat-gain amplifier from DC to microwave. The developed lossy-match ultrabroad-band amplifier operates as a RC coupled circuit in the low-frequency range and lossless impedance matching circuit in the microwave frequency range with gain compensation circuits. The reduced gain caused by external resistors is compensated using 2-stage cascade amplification, and the gain of designed unit is 12.5.+-.1dB from the vicinity of DC to 7GAz. The experimental gain characteristics are good agreement with computer simulated results. The input and output VSWRs are measured under 2:1 over the operating frequency range, and the gain goes down over 15dBrange with various gate bias voltages.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.339-340
• /
• 2007

Face detection plays an important role in HCI and face recognition. In this paper, we propose a rotation-invariant real-time face detection algorithm for color images in complex background. It consists of four processing step: (1) motion detection, (2) skin color region filler, (3) Eyemap detector for rotated face, and (4) Adaboost face classifier. This system has been tested in in-door environments, such as office and achieves over 95% detection rate.

• Journal of Plant Biology
• /
• v.19 no.2
• /
• pp.37-40
• /
• 1976

The experiment designed to obtain information relative to the favourable levels to apply N.P.K fertilizer was conducted at the hop garden of College of Agriculture, S.N.U. in 1975. The varieties used were 1-year-old Cascade, Hallertau and Shinshuwase. The design of the experiment was a split plot design with 3 replications. Yields were recorded as fresh weight of harvested cones in gram per split plot. The results obtained from the experiment were as follows: 1. The results from analysis of the data for 3 varieties indicated that significant increase in yield were found due to the application of 46g N, 20g P2O5 and 60kg K2O per plant, although higher level thn the above caused a remarkable reduction of yield. 2. The individual fresh weight of harvested cones was significantly increased with application of nitrogen, phosphorus and potash, regardless of fertilizer levels. 3. Analysis of variance for yields showed that there were no significant interaction between fertilizer level and variety, i.e., all varieties used might require the same fertilizer level.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.1
• /
• pp.42-50
• /
• 1997

Vector quantization has shown to be useful for compressing data related with a wide rnage of applications such as image processing, speech processing, and weather satellite. Neural networks of images this paper propses a efficient neural network learning algorithm, called learning count control algorithm based on the frquency sensitive learning algorithm. This algorithm can train a results more codewords can be assigned to the sensitive region of the human visual system and the quality of the reconstructed imate can be improved. We use a human visual systrem model that is a cascade of a nonlinear intensity mapping function and a modulation transfer function with a bandpass characteristic.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.3
• /
• pp.202-209
• /
• 2002

It is difficult to support collaborative design with a conventional ship CAD system which manages design information using files. In this research, file storage has been replaced with a database. This paper describes the OpenDIS which is an interface between the geometric kernel and the database. Its main purpose is to implement the CAD system which has the STEP database as the native storage. A prototype CAD system has been implemented using that OpenDIS interface which is implemented by OpenCascade geometric kernel and the Objectstore object-oriented database. The STEP methodology is used as the database schema. This CAD system has been applied to the hull design of a ship in order to verify the usefulness of the interface.