• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.372-378
• /
• 2020

Drones, which show strong growth in the fourth industry, are commonly used for disaster response. In the event of an actual disaster, local governments should carry out 13 cooperative functions to respond to the disaster, but there are difficulties in collecting on-site information in places where it is difficult for people to access or grasp the situation. Based on the 13 collaborative functions that are essential for operations in the event of a disaster, a utilization plan of highly utilized drones was derived. Through the analysis of overseas cases and drone utilization by each department, a total of 10 out of 13 collaborative functions of the Disaster and Safety Countermeasures Headquarters (disaster situation management, emergency life safety support, emergency recovery, disaster resource support, traffic measures, medical and quarantine services, disaster site environment maintenance, social order maintenance, search, rescue, and emergency) were derived. These results can enhance the efficiency of the disaster response by presenting a plan to utilize drone images for each function.

• Knowledge Management Research
• /
• v.9 no.1
• /
• pp.97-116
• /
• 2008

The purpose of this study lies in examining how knowledge management was applied to PMI(Post Merger Integration) in bank merger. Individuals and organizations in Korea have experienced a lot of changes since the 1997 foreign exchange crisis. In such a situation, individuals came to think the only thing to rely on was personal knowledge. Since organizations had to lay off workers in order of their birth year, not based on whether or not individuals had the knowledge necessary for the organizations, they needed to have such a system that could use their explicit knowledge and even outside knowledge or customers' knowledge as IT developed by changing individuals' tacit knowledge into explicit knowledge as needed in order to continue to maintain their competitiveness and for their own development. Thus, each firm started to pitch for the introduction of knowledge management. Individuals started to store their own experience and knowledge in their homepages or blogs. It was Woori Bank, the merged bank of Hanil Bank and Commercial Bank of Korea, that introduced the knowledge management system and Shared Service Center, in which knowledge creation is available, for the first time in the banking business. Its previous name was Hanbit Bank. Hanbit Bank wanted to construct an advanced bank system, bringing in their chief information officer(CIO) from a foreign bank and introducing an IT software used in Spanish banks to adjust all banking processes to it. However, they could not help giving up the plan in the middle of the road since there was a great difference between Spain and Korea in the financial system and more than 30% of software package had to be changed. In this situation, PMI was delayed, and customer inconvenience continued, which made the integration of organizational cultures slow down. As a breakthrough in this situation, knowledge management was introduced. To integrate knowledge of two organizations in the process of PMI is an important job for all merger candidates. This study aims at presenting the successful results from using knowledge management as a means to PMI ahead of other financial institutions so they can apply them to their organizations. PMI was not achieved properly after the two banks had been merged as Hanbit, but entering the era of Woori Bank, workers were integrated under one standard organization following the organizational and knowledge integration, and knowledge management was introduced for an efficient sharing of knowledge among members. A great number of mergers have occurred up to now, but Woori Bank is the first case that used knowledge management as a means to both PMI and competitiveness enhancement. Probably it was an appropriate time when Woori Bank introduced knowledge management as it was organized. Since Hanil Bank and Commercial Bank of Korea had not introduced knowledge management until then, it could use knowledge management as a means to PMI. Using knowledge management, it could create a new organizational culture and increase competitiveness in the banking industry.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.2
• /
• pp.280-285
• /
• 2006

The current study was conducted to investigate the relationship between stress related gene and meat quality in pigs. A total number of 212 three-way cross bred (Landrace-$Yorkshire{\times}Duroc$) and 38 Duroc were sampled from the Korean pig industry to determine genotype frequency of porcine stress syndrome (PSS) and heat shock protein 70 kDa (HSP70) genes and their relationship with carcass traits and longissimus meat quality. Screen of HSP70 was performed by the single strand conformation polymorphism (SSCP) technique. Based on the analysis of restriction fragment length polymorphism (RFLP) in ryanodine receptor 1 (RYR1) gene, genetic disorder of PSS was related to a mutation at $18,168^{th}$ (C to T) of exon 17. There was no significant difference in ultimate meat pH and backfat thickness between HSP70 K1-AA type and -BB type in pure Duroc breed. In Landrace-$Yorkshire{\times}Duroc$ (L-$Y{\times}D$) cross bred pig, our results indicated that HSP70 derivate type in Duroc had a limited effect on backfat thickness, but L-$Y{\times}D$ type had a noticeable linkage with HSP70 K1-AA and K3-AB. This tendency was also observed in hot carcass weight where HSP70 K1-AA and K3-AB resulted in heavier weight with 86.3 kg compared to HSP70 K1-AB and K3-BB of 74.3 kg. Results imply that stress related HSP70 genotype has a potential association with backfat thickness and carcass weight.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.4
• /
• pp.1-12
• /
• 2018

During few decades, Korean economy has been growing with heavy and manufacturing industries. However, the economy meets limitations of growth rate, and employment rate. The Korean government has been trying to overcome these limitations using development of venture businesses and re-organization of industrial ecosystem. These efforts make high survival rate of recent venture companies. There are previous researches about relation between characteristics of entrepreneur and managerial performance, there are several limitations. Firstly, most of papers were based on survey with specific region or industry. Secondly, related researches were carried out with unable to distinguish among firm's survival periods. This paper uses the '2017 Survey of Korea Venture Firms' data that is approved by the Korean government. This data includes whole industries and survival periods. The aim of this research is finding the effect of characteristics of entrepreneur on managerial performance of venture firms by different survival periods using data envelopment analysis (DEA). If entrepreneur has doctoral degree, the firm's managerial performance is lower than bachelor degree. In addition, over 10 years of working career, and joint-venture have positive effect on firm's performance. This paper can provide valuable information to venture related policy makers and investment decision makers.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.159-174
• /
• 2017

The long-term imbalances between supply and demand in office market can weaken urban growth since excessive supply of offices led to office market instability and excessive demand of offices weakens growth of urban industry. Recently, there have been a lot of new large-scale supplies, which increased volatility in Seoul office market. Nevertheless, new supply of Seoul office has not been fully examined. Given this, the focus of this article was on confirming the influences of profitability, replacement cost, and demand on new office supplies in Seoul. In examining those influences, another focus was on their relative influences over time. For these purposes, we analyzed quarterly data of Seoul office market between 2003 and 2015 using a vector error correction model (VECM). As a result, in terms of the influences on the current new supply, the impact of supply before the first quarter was negative, while that of office employment before the first quarter was positive. Also, that of interest rate before the second quarter was positive, while those of cap rate before the first quarter and cap rate before the second quarter were negative. Based on the findings, it is suggested that prediction models on Seoul offices need to be developed considering the influences of profitability, replacement cost, and demand on new office supplies in Seoul.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.27-36
• /
• 2019

The demand for a low dispersion lens with a small refractive index and a high refractive index is increasing, and accordingly, there is an increasing need for a releasable protective film with high heat resistance and abrasion resistance. On the other hand, the optical industry has not yet established a clear standard for the manufacturing process and quality standards for mold-releasing protective films used in aspheric glass lens molding. Optical lens manufacturers treat this technology as proprietary information. In this study, an experiment was conducted regarding the optimization of ion etching, magnetron, and arc current at each source and filter part, and bias voltage in FCVA (filtered cathode vacuum arc)-based Ta-C thin film coatings. This study found that compared to iridium-rhenium alloy thin film sputtering products, the coating conditions were improved by approximately 50%, 20%, and 40% in terms of thickness, hardness, and adhesive strength of the film, respectively. The thin-film coating process proposed in this study is expected to contribute significantly to the development and utilization of glass lenses, which will help enhance the minimum mechanical properties and quality of the mold-release thin film layer required for glass mold surface forming technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.384-391
• /
• 2020

An annual average of more than 100 casualties occur on construction sites designated by the occupational safety and health law despite the safety assessment regulations from Korea Occupational Safety & Health Agency. Even if those sites involve more harmful or hazardous work than other sites, the result creates doubt regarding the effectiveness of the safety assessment regulations. The safety of construction sites is difficult to maintain continuously and instantly because ofthe variability in the construction industry despite inspecting workers, equipment, and facilities by managers. Many discussions on how to utilize BIM have been made to improve the productivity of construction projects, and BIM-based modeling and simulation would bring many benefits to safety. This study examined the hindrance factors of field utilization of the safety assessment regulations through a research literature survey, disaster situation analysis and questionnaire, and suggests the necessity of the application of BIM that enhances the effectiveness of safety assessment regulations by identifying the relationship between the hindrance factors and the function of BIM.

• International Journal of Fluid Machinery and Systems
• /
• v.10 no.1
• /
• pp.40-46
• /
• 2017

Small valves including ball valves, gate valves and butterfly valves have been adopted in the fields of steam power generation, petrochemical industry, carriers, and oil tankers. Butterfly valves have normally been applied to fields where in narrow places installing the existing valves such as gate valves and ball valves have proven difficult due to the surrounding area and the heavier of these valves. Butterfly valves are used to control the mass flow of the piping system under low pressure by rotating the circular disk installed inside. The butterfly valve is benefitted by having simpler structure in which the flow is controlled by rotating the disc circular plate along the center axis, whereas the weight of the valve is light compared to the gate valve and ball valve above-mentioned, as there is no additional bracket supporting the valve body. The manufacturing company needs to acquire the performance and life test equipment, in the case of adopting the improving factors to detect leakage and damage on the seat of the valve disc. However, small companies, which are manufacturing the industrial valves, normally sell their products without the life test, which is the reliability test and environment test, because of financial and manpower problems. Furthermore, the failure mode analysis of the products failed in the field is likewise problematic as there is no system collecting the failure data on sites for analyzing the failures of valves. The analyzing and researching process is not arranged systematically because of the financial problem. Therefore this study firstly tried to obtain information about the failure data from the sites, analyzed the failure mode based on the field data collected from the customers, and then obtained field data using measuring equipment. Secondly, we designed and manufactured the performance and life test equipment which also have the real time monitoring system with the naked eye for the butterfly valves. The concept of this equipment can also be adopted by other valves, such as the ball valve, gate valve, and various others. It can be applied to variously sized valves, ranging from 25 mm to large sized valves exceeding 3000 mm. Finally, this study carries out the life test with square wave pressure, using performance and life test equipment. The performance found out that the failures from the real time monitoring system were good. The results of this study can be expanded to the other valves like ball valves, gate valves, and control valves to find out the failure mode using the real time monitoring system for durability and performance tests.

• The Korean Journal of Applied Statistics
• /
• v.26 no.1
• /
• pp.151-162
• /
• 2013

Due to a growing demand for the second-hand product, especially for the expensive one, the warranty and maintenance policies for such products have been studied to improve the product reliability of late. In this paper we study a periodic maintenance model for the second-hand product which is purchased by the customer at the age of $x$. When purchased, the dealer provides a warranty of a fixed length during which the product is maintained periodically to reduce the failure rate of the product and thus, to improve the reliability after each maintenance is served. If a failure occurs between two successive maintenances, only minimal repair is conducted. As for the warranty policy, we adopt free non-renewing repair action on each failure, in addition to the periodic maintenance service during the warranty period. Thus, under the given warranty policy, all the maintenance and repair costs incurred during the warranty period are charged to the dealer. For the proposed periodic maintenance scheme, we formulate a cost model to evaluate the expected total cost charged to the dealer during the warranty period and derive an optimal upgrade level of the failure rate at each maintenance to minimize the expected total warranty cost from the perspective of the dealer. We also present numerical results for an optimal upgrade level based on the proposed methods.

• Fire Science and Engineering
• /
• v.28 no.1
• /
• pp.37-43
• /
• 2014

The high predictive performance of fire detector models is essentially needed to assure the reliability of fire and evacuation modeling in the process of Performance-Based fire safety Design (PBD). The main objective of the present study is to measure input information in order to predictive the accurate activation time of fixed temperature heat detectors adopted in Fire Dynamics Simulator (FDS) as a representative fire model. To end this, Fire Detector Evaluator (FDE) which could be measured the device properties of detector was used, and the spot-type fixed temperature heat detectors of two thermistor types and one bimetal type were considered as research objectors. Activation temperature and Response Time Index (RTI) of detectors required for the fire modeling were measured, and then the RTI was measured for ceiling jet flow and vertical jet flow in consideration of the install location of detectors. The results of fire modeling using measured device properties were compared and validated with the experimental results of full-scale compartment fires. It was confirmed that, in result, the numerically predicted activation time of detector showed reasonable agreement with the measured activation time.