• Journal of Information Technology Services
• /
• v.10 no.4
• /
• pp.119-131
• /
• 2011

When your company buys packaged software, the company needs to determine how many software licenses must be purchased. If the quantity is too small, it will be not enough for the users to access the programs at anytime within the company. Conversely, if the quantity is too large, they will waste a lot of money. In this paper, we surveyed several number of researchers of K institute and derived the using pattern of a specific packaged software. We estimated a proper number of packaged software licenses by Erlang Loss Function, the Engset Model, and simulation model. With the results of the three methodologies, we were able to empirically verify economic benefits of packaged software purchase by comparing NPV (Net Present Value) between user licenses and network licenses. Consequently, TCO of user licenses is much higher than that of network licenses. We had probabilistically calculated proper number of licenses based on the using pattern of users. Hence, this paper will be useful for decision makers who are going to determine package software's type and quantity from an economic perspective.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.198-209
• /
• 2005

Overbreak or underbreak is one of the most important factors in evaluation the results of a tunnel blasting. Overbreak, which depends on the quality of rock, the type and quantity of explosives, and the method and condition of drilling, has been a target of challenge to many blasting engineers as it is connected with economic directly. Drilling is generally known as a primary one of overbreak producing factors. So, This study presented the practical solution to reduce overbreak, which was caused by drilling, through the analyses of how to make a drilling process accurate and how to evaluate the effect of each drilling method. Thus, this solution would give a quantitative analysis of overbreak and provide the information of how to reduce the quantity of overbreak. Moreover, for verifying this solution, we applied it to a tunnel project and then have found out that the quantity of overbreak decreased to approximately 10-40% compared with the previous way of overbreak control.

• Journal of Biosystems Engineering
• /
• v.14 no.1
• /
• pp.41-48
• /
• 1989

In order to provide a basic information for the government policy in the future, rice milling costs of Small Capacity Farm-house Rice Whiteners (SCFRW) were estimated by surveying and analyzing the major factors to affect their costs. Two types of SCFRW having one stage and two stage milling process and two rice varieties, Tong-il and Akibare, were considered for their cost estimation, respectively. Also, their costs were compared with those of Private Custom-work Mill in order to determine its economical feasibility. The results were concluded as follows; 1. Major factors to affect the costs were annual milling quantity, purchase price of SCFRW and grain milling loss. 2. Total milling costs of SCFRW were a function of annual milling quantity. These costs decreased rapidly as annual milling quantity increased. 3. In comparison of milling costs between single pass type and double pass type SCFRW, the former was more economical than the latter. 4. Also, in comparison of milling costs between two varieties by using SCFRW, Akibare was less expensive than Tong-il. 5. In comparison with private Custom-work Mill, both single pass and double pass type SCFRW were less economical than private Custom-work Mill. 6. In order to have an economical feasibility, SCFRW should be designed and developed to reduce its milling loss and purchase price.

• Journal of Computational Design and Engineering
• /
• v.2 no.1
• /
• pp.16-25
• /
• 2015

Since construction projects are large and complex, it is especially important to provide concurrent construction process to BIM models with construction automation. In particular, the schematic Quantity Take-Off (QTO) estimation on the BIM models is a strategy, which can be used to assist decision making in just minutes, because 70-80% of construction costs are determined by designers' decisions in the early design stage. This paper suggests a QTO process and a QTO prototype system within the building frame of Open BIM to improve the low reliability of estimation in the early design stage. The research consists of the following four steps: (1) analyzing Level of Detail (LOD) at the early design stage to apply to the QTO process and system, (2) BIM modeling for Open BIM based QTO, (3) checking the quality of the BIM model based on the checklist for applying to QTO and improving constructability, and (4) developing and verifying a QTO prototype system. The proposed QTO system is useful for improving the reliability of schematic estimation through decreasing risk factors and shortening time required.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.123-132
• /
• 2012

PURPOSES: This study is to investigate the consideration which relates with a disaster from route alignment process and proposed the method it will be able to evaluate a disaster danger fixed quantity. METHODS: Use the landslide disaster probabilistic map of GIS based and in about landslide occurrence of the route alignment at the time of neighboring area after evaluating a risk fixed quantity, it compared LCC expense in about each alternative route. It developed the system it will be able to analyze a LCC and a disaster risk in about the alternative route. In order to verify a risk analytical algorithm and the system which are developed it selected national road 59 lines on the demonstrative route and it analyzed a disaster risk. RESULTS: Demonstrative route not only the disaster risk to be it will be able to compare a disaster risk fixed quantity like the economical efficiency degree in compliance with LCC expense productions it compared and there being the designer will be able to decide the alternative route, it confirmed. CONCLUSIONS: Roads can be designed by considering occurs repeatedly landslides and debris flow caused by disasters in advance and expect to be able to effect that can reduce the overall cost to recover losses caused by the disaster, and temporally loss is expected.

• Research in Community and Public Health Nursing
• /
• v.14 no.1
• /
• pp.36-44
• /
• 2003

The purpose of this study is to investigate the effects of follow-up support in the adolescent smoking cessation program. In this study, a model for an effective adolescent anti-smoking program, which includes follow-up support, is based on the method of cognitive-behavioral therapy. The study lasted for 7 weeks, while information on smoking including materials to be analyzed, were provided to the subjects. Meanwhile, the state of the smokers was studied while consultations on anti-smoking was also carried out in the 7th week. At first, the quantity of cigarettes smoked between groups made no difference, but there was an obvious difference in the rate of people who stopped smoking and in the quantity of cigarettes smoked between group I(managed for 7 weeks) ,group II (managed for only 4 weeks) and group III (not managed at all after anti-smoking class). According to the results of the study, we can conclude that the follow-up support plays a big role not only in raising the rate of success in the level of reformed smokers, but also in lowering the quantity of cigarettes smoked.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.171-176
• /
• 2021

This paper deals with bid evaluation problem that chooses the vendors and quantity with minimum purchasing cost for bid information of setup cost and unit price. For this problem, the branch-and-bound(BB) and branch-and-cut(BC) methods are well-known. But these methods can be fail to obtain the optimal solution. This paper gets the initial feasible solution with procuring quantity assignment principle in accordance with the unit price or setup cost rank-first. Then procuring quantity moving optimization(vendor change) is execute take account of unit price or setup cost rank. As a result of experimentation, the propose algorithm is significantly lower compared to BB and BC.

• The Journal of Industrial Distribution & Business
• /
• v.14 no.1
• /
• pp.67-74
• /
• 2023

Purpose: This study aims to investigate how the online review usefulness affect consumers' shopping behavior in non-face-to-face shopping, which is now very common format of shopping environment after COVID-19 pandemic. Factors influencing online reviews were determined as quantity of review, agreement of review and characteristic of review based on research by existing researchers. Research design, data, and methodology: Customers in their teens to 60s who had experience of checking online reviews and purchasing products were surveyed using a Google questionnaire form from January 15, 2022 to February 19, 2022. To verify the validity and reliability of the research model, confirmatory factor analysis and discriminant validity analysis were conducted. In addition, the causal relationship between factors was verified through path analysis. Results: As a result, quantity of review and agreement of review had a statistically significant effect on review usefulness. However, characteristic of review did not have a statistically significant influence on review usefulness. And review usefulness had a statistically significant effect on attitude and purchase intention. Conclusions: This study investigated the factors affecting usefulness of online reviews and empirically analyzed the effects of online reviews on consumer attitudes and purchase intentions providing practical and theoretical implications for corporate online review management.

• Journal of the Korean Dietetic Association
• /
• v.10 no.2
• /
• pp.143-158
• /
• 2004

The object of this study is to investigate and analyze the quantity and quality of informations on health, food and nutrition reported by newspapers. Six different major domestic daily newspapers(Hankook Ilbo, Donga IIbo, Chosun IIbo, Kyunghyang Shinmun, Hankyoreh Shinmun, JoongAng Ilbo), were monitored from 1st of May to 31st of Oct. 2002.. The results of monitoring in the newspapers were summarized as follows; 1. The total percentage of the articles on health and food nutrition was 2.7% and the percentage of the advertisements on health, food and nutrition was 17.5% of total area of the newspaper. The ratio of the number of food and nutrition topic on the total number of health and food nutrition topic was 35.8% for the articles, was 62.9% for the advertisements. Among advertisements on food and nutrition, the percentage of advertisements on healthy foods was the highest (3,481 or 55.0%). 2. Contents of 340 articles(26.1%) were reported as suitable informations. Contents of 259 articles(19.9%) were reported as inaccurate informations on health, food and nutrition. In the analysis of advertisements, the number of advertisements without sufficient reliable sources was 2,488 cases(23.0%), and with exaggerated contents was 2,268 cases(21.0%). The articles and advertisements should be backed by scientific research or reliable sources and also the opinions of people with expertise in order to report accurate informations to the general public. In order to achieve these results, there should be continuing monitoring activity for the newspapers.

• Proceedings of the CALSEC Conference
• /
• 2004.02a
• /
• pp.89-97
• /
• 2004

1. Introduction; Fundamental Difference between conventional old commerce and e-commerce？ 2. "Quantity changes into Quality"; Phase transition and Critical phenomena Logarithmic Convergence and Emergence of Quality 3. Networked Small World; Indications from Genomics; Power-Law Ordered Plain Structure of Super-Complex System ⇔ The Structure of e-Biz. 4. Uniquitous Crisis to Ubiquitous Critical Points for the Emergence of Qualified Business with e-strucrure