• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.4
• /
• pp.436-441
• /
• 1985

The study was conducted to provide basic information to breeders and agronomists working with sesame. The grain weight and germinability were investigated for eight plant types classified by branching habit, capsules per axil, and carpels and loculi of a capsule. Two typical cultivars were chosen for each plant type among 527 gene pools. Dry weight of one thousand grains was increased rapidly from 25th to 35th day after flowering, and reached peak on 40th day after flowering in upper part capsules and 45th day after flowering in lower and middle part capsules, so that this period was considered to be of physiological maturity in each capsule bearing part. Side capsules on main stem and branch capsules were lighter than central ones of main stem, and upper capsules of four carpels eight loculi type decreased more seriously. BTB type demonstrated relatively better growth compared to the growth of BTQ type in one thousand grain weight. The maximum grain filling duration for germination percentage increased rapidly up to 40th day after flowering. Above 70% germinability was obtained from 40th day after flowering. Harvesting time of physiological maturity was considered to be 45th day after flowering with peaks of 2.14g of one thousand grain weight, 26% of grain water content and 90% of germinability.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.92-97
• /
• 1994

The reports on the chemical composition of developing job's tears seeds is very insufficient by this time. The purpose of this study was to obtain the fundamental information on chemical component of the developing job's tears seed, including starch, sugar, oil, protein, fatty acid, Alkali Digestibility Value(ADV), 100-grain weight. Two job's tears varieties in different by maturity types were analyzed for those components from 10 days after heading to maturity, with 5-day intervals. Total sugar content in seeds followed a pattern of linear increase after heading, but it started to decreased around 15 days after heading. On the other hand, starch content continued to increased until maturity and the highest increasing occurred between 15 and 20 days after heading. The protein content of seeds was decreased, while oil content was increased through the ripening process. Starch content showed a positive correlation with 100-grain weight, ADV, oil and germination percent, but it had negative correlation between total sugar and protein contents in ripening process. Maximum starch content, 100 grain weight, and germination percent obtained by quadratic equation were attained 38 to 43 days after heading. So that the physiological maturity of job's tears seeds was considered to be 40 days after heading.

• Asia pacific journal of information systems
• /
• v.23 no.4
• /
• pp.103-128
• /
• 2013

When a consumer needs a product or service and multiple sellers are available online, the process of selecting a seller to buy online from is complex since the process involves many behavioral dimensions that have to be taken into account. As a part of this selection process, consumers may set minimum trust expectation that can be used to screen out less trustworthy sellers. In the previous research, the level of consumers' trust expectation has been anchored on two important factors: product involvement and perceived risk. Product involvement refers to the extent to which a consumer perceives a specific product important. Thus, the higher product involvement may result in the higher trust expectation in sellers. On the other hand, other related studies found that when consumers perceived a higher level of risk (e.g., credit card fraud risk), they set higher trust expectation as well. While abundant research exists addressing the relationship between product involvement and perceived risk, little attention has been paid to the integrative view of the link between the two constructs and their impacts on the trust expectation. The present paper is a step toward filling this research gap. The purpose of this paper is to understand the process by which a consumer chooses an online merchant by examining the relationships among product involvement, perceived risk, trust expectation, and intention to buy from an e-tailer. We specifically focus on the mediating role of perceived risk in the relationships between enduring product involvement and the trust expectation. That is, we question whether product involvement affects the trust expectation directly without mediation or indirectly mediated by perceived risk. The research model with four hypotheses was initially tested using data gathered from 635 respondents through an online survey method. The structural equation modeling technique with partial least square was used to validate the instrument and the proposed model. The results showed that three out of the four hypotheses formulated were supported. First, we found that the intention to buy from a digital storefront is positively and significantly influenced by the trust expectation, providing support for H4 (trust expectation ${\rightarrow}$ purchase intention). Second, perceived risk was found to be a strong predictor of trust expectation, supporting H2 as well (perceived risk ${\rightarrow}$ trust expectation). Third, we did not find any evidence of direct influence of product involvement, which caused H3 to be rejected (product involvement ${\rightarrow}$ trust expectation). Finally, we found significant positive relationship between product involvement and perceived risk (H1: product involvement ${\rightarrow}$ perceived risk), which suggests that the possibility of complete mediation of perceived risk in the relationship between enduring product involvement and the trust expectation. As a result, we conducted an additional test for the mediation effect by comparing the original model with the revised model without the mediator variable of perceived risk. Indeed, we found that there exists a strong influence of product involvement on the trust expectation (by intentionally eliminating the variable of perceived risk) that was suppressed (i.e., mediated) by the perceived risk in the original model. The Sobel test statistically confirmed the complete mediation effect. Results of this study offer the following key findings. First, enduring product involvement is positively related to perceived risk, implying that the higher a consumer is enduringly involved with a given product, the greater risk he or she is likely to perceive with regards to the online purchase of the product. Second, perceived risk is positively related to trust expectation. A consumer with great risk perceptions concerning the online purchase is likely to buy from a highly trustworthy online merchant, thereby mitigating potential risks. Finally, product involvement was found to have no direct influence on trust expectation, but the relationship between the two constructs was indirect and mediated by the perceived risk. This is perhaps an important theoretical integration of two separate streams of literature on product involvement and perceived risk. The present research also provides useful implications for practitioners as well as academicians. First, one implication for practicing managers in online retail stores is that they should invest in reducing the perceived risk of consumers in order to lower down the trust expectation and thus increasing the consumer's intention to purchase products or services. Second, an academic implication is that perceived risk mediates the relationship between enduring product involvement and trust expectation. Further research is needed to elaborate the theoretical relationships among the constructs under consideration.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.2
• /
• pp.156-164
• /
• 2015

High temperature stress would affect rice production in the future as heat wave is expected to occur frequently under climate change conditions. The objective of this study was to obtain rudimentary information to assess the impact of heat stress on rice yield and its yield component in Korea. Two rice cultivars "Hwaseongbyeo" (Japonica) and "Dasanbyeo" (Tongil-type) were grown at different nitrogen fertilization levels in two seasons. These cultivars were grown in 1/5000a Wagner pot placed within four plastic houses where temperature was controlled at ambient, ambient$+1.5^{\circ}C$, ambient$+3^{\circ}C$ and ambient$+5^{\circ}C$ throughout the rice growing season in Suwon ($37^{\circ}16^{\prime}N$, $128^{\circ}59^{\prime}E$), Korea. The degree of temperature change affected grain yield whereas the level of nitrogen had little impact on grain yield. The number of panicle per pot and spikelet per panicle were not significantly different among temperature treatments in both cultivars tested. In contrast, 1000-grain weight and ripened grain ratio were decreased significantly under the treatments raising the air temperature to the level of $5.0^{\circ}C$ and $1.5^{\circ}C$ above the ambient air temperature in Dasanbyeo and Hwaseongbyeo, respectively. Reduction of 1000-grain weight and ripened grain ratio under the temperature treatments of $3.0^{\circ}C$ and $5.0^{\circ}C$ above the ambient air temperature resulted in significantly less grain yield for Dasanbyeo and Hwaseongbyeo, respectively. The greater sensitivity of grain yield to temperature increase in Dasanbyeo was attributable to the sharp decrease of 1000-grain weight and ripened grain ratio with the temperature rise above $23^{\circ}C$ during ripening period. On the other hand, Hwaseongbyeo had little variation of them in the temperature range of $23-27^{\circ}C$. These results suggested that grain yield would decrease under future climate conditions due to grain weight decreased by shorter grain filling period as well as the ripened grain ratio reduced by spikelet sterility and early abortion of rice kernel development. Thus, it would be essential to use cultivars tolerant to heat stress for climate change adaptation, which merits further studies for developing varieties that have traits to avoid spikelet sterility and early abortion of rice kernel, e.g., early morning flowering, under heat wave.

• The Korean Journal of Elementary Counseling
• /
• v.5 no.1
• /
• pp.227-253
• /
• 2006

It seems common for students living at a small county and islands to experience psychological conflicts and be unaccustomed in the peer society because they are not familiar with peer interaction and social skills. This is a case study of L (hereinafter called L) who was grown up in the sheltered school at a small county. L was psychologically disturbed because he couldn't get along well in the transferred school. It is the reason why he had lived in the sheltered school at a small county, so he had not enough exposure to interact with peer and social skills. Sometimes he was obstinate irrationally and when he had trouble with friends, he threw something out or went out of school and tricked juniors dangerously. The fact of disperse with families, parent's indifference, and hate of older brother made L to have ill feeling against family. He had low motivation and low self confident in learning because of short attention time and accumulated poor learning progress. In this study, he was evaluated at various area, such as, intelligent, affective, personal and inter-personal, before counselling. To evaluated the effect of the counselling, K-WISC-III, KPRC, sentence filling test, social adaptation ability test, etc, were administered right after the counselling was over and 8 weeks later. For specific information gathering and analysing, observation diary and deepen counselling were accomplished by homeroom teacher, his mother, and his peers. To correct his problematic behaviors, 13 counseling sessions were accomplished for 6 months and those counselling sessions were recorded and analysed definitely. Followings are the result of this case study. First, he was recovered from the anxiety of inter-personal interaction and he started to interact with peers. The result of sac scale score of KPRC profile was lower than before as much as average student after counseling and 8 weeks later. This reveals that the distress against interpersonal relation have settled. Especially, through the result of sentence filing test, he seemed to feel attachment to peers and be positive, active in the relation of peer. For instance, he was active in the open class lesson and interacted well with peers. It could be said that he overcame the psychological distress comparing with previous time. Second, he could apologize to his peer and juniors for his fault. His attitude were well shown in the letter from an old friend at the sheltered school, average KPRC profiling score comparing with previous counseling time, and remarkable decrease of attack scale score of teacher and peer. Third, his view toward family turn out positive. He recognized his situation that he lived apart from family and even worried about his parent's financial difficulty. Through solving the confliction with his older brother, he could acquire the feeling of family reunion. Fourth, his learning motivation and self-confidence were increased. He confirmed his future positively and he might be judged more attentive because his intelligence index was higher than before as much as average student. With the main goal of this study, verification for effectiveness of counseling. understanding and helping problematic students such as L who lives at a small county and island through investigation of their real situation and problems with the method of counseling and socio-cultural analysis is worthwhile. Identification of ideal relationship with peer is related with positive self-conception, harmonic social adaptation and development of child. It is time to investigate easy adaptive in classroom and well-organised program to acquire general social skills for sheltered school students at a small county and islands.

• Journal of National Security and Military Science
• /
• s.9
• /
• pp.313-340
• /
• 2011

The National Defense Reformation bill of "National Defense Reformation 2020" which have been constantly disputed and reformed by the government went through various levels of complementary measures after the North Korean sinking on the Republic of Korea (ROK) Naval Vessel "Cheonan". The final outcome of this reform is also known as the 307 Plan and this was announced on the 8th March. The reformed National Defense Reformation is to reduce the number of units and military personnel under the military structure reformation. However, in order for us to undertake successful National Defense Reformation, the use of privatized civilian resources are essential. Therefore according to this theory, the ROK Ministry of National Defense (MND) have selected the usage of privatized resources as one of the main core agenda for the National Defense Reformation management procedures, and under this agenda the MND plans to further expand the usage of private Especially the MND plans to minimize the personnel resources applied in non-combat areas and in turn use these supplemented personnel with optimization. In order to do this, the MND have initiated necessary appropriate analysis over the whole national defense section by understanding various projects and acquisition requests required by each militaries and civilian research institutions. However for efficient management of privatized civilian resources, first of all, those possible efficient private resources which can achieve optimization will need to be identified, and secondly continuous systematic reinforcements will need to be made in private resource usage legislations. Furthermore, we would need to consider the possibility of labor disputes because of privatization expansion. Therefore, full legal and systematic complementary measures are required in all possible issue arising areas which can affect the combat readiness posture. There is another problem of huge increase in operational expenses as reduction of standby forces are only reducing the number of soldiers and filling these numbers with more cost expensive commissioned officers. However, to overcome this problem, we would need to reduce the number of positions available for active officers and fill these positions with military reserve personnel who previously had working experiences with the related positions (thereby guaranteeing active officers re-employment after completing active service). This would in tum maintain the standards of combat readiness posture and reduce necessary financial budgets which may newly arise. The area of maintenance, supply, transportation, training & education duties which are highly efficient when using privatized resources, will need to be transformed from military management based to civilian management based system. For maintenance, this can be processed by integrating National Maintenance Support System. In order for us to undertake this procedure, we would need to develop maintenance units which are possible to be privatized and this will in turn reduce the military personnel executing job duties, improve service quality and prevent duplicate investments etc. For supply area, we will need to establish Integrated Military Logistics Center in-connection with national and civilian logistics system. This will in turn reduce the logistics time frame as well as required personnel and equipments. In terms of transportation, we will need to further expand the renting and leasing system. This will need to be executed by integrating the National Defense Transportation Information System which will in turn reduce the required personnel and financial budgets. Finally for training and education, retired military personnel can be employed as training instructors and at the military academy, further expansion in the number of civilian professors can be employed in-connection with National Defense Reformation. In other words, more active privatized civilian resources will need to be managed and used for National Defense Reformation.

• Horticultural Science & Technology
• /
• v.31 no.5
• /
• pp.558-564
• /
• 2013

The objective of this research was to secure the fundamental information in changes of soil physical properties as influenced by the compaction of root media during container filling. Three root media were formulated by blending peatmoss (PM) with expanded rice hull (PM + ERH, 8:2, v/v), carbonized rice hull (PM + CRH, 6:4) and ground and aged pine bark (PM + GAPB, 8:2). Based on the optimum bulk density, the amount of root media filled into 6.0, 7.5, 8.5, 10.5 and 12.5 cm were adjusted to 90, 100, 110, 120, and 130%, then the changes in total porosity (TP), container capacity (CC), and air-filled porosity (AFP) were measured. The TP decreased significantly as the packing amount of three root media were elevated in all sizes of container. The TP did not show significant differences among the root media in small sizes of containers, but showed significant differences when sizes of containers became larger. As packing amount of three root media were elevated, the CCs in all sizes of containers were decreased. The PM + CRH had the lowest CC among three root media in containers smaller than 8.5 cm, but had the highest CC in those larger than 10.5 cm. These results indicated that the decreases in CC were influenced by the sizes of containers as well as kinds of root media. The elevation of packing amount in three root media diminished significantly the AFP. The AFP in PM + GAPB medium was two times as high as those of PM + ERH or PM + CRH when equal packing densities were applied in all sizes of containers. As the container sizes became larger in three root media, the extents in decreasing of CC were distinct than those of AFP. Above results indicate that elevation in packing amount of three root media decreased significantly the TP, CC and AFP, but these were influenced differently by sizes of containers and kinds of root media. The results would be useful for expectation in the changes of physical properties in various sizes of containers filled with peatmoss based root media.

• Economic and Environmental Geology
• /
• v.52 no.3
• /
• pp.251-258
• /
• 2019

During the detailed geological survey around the southern Yangsan Fault, we newly found a Quaternary fault outcrop, which cuts unconsolidated sediments. The fault named the Sinwoo site, located in the Sinwoo pasture, Miho-ri, Duseo-myeon, Ulsan metropolitan city, is the first discovered Quaternary fault near the western part of the south Yangsan Fault. In this study, we provide information on characteristics of fault geometry and unconsolidated sediment at Sinwoo site based on the analysis data of topography, drainage, and lineament around the study site. The fault site is situated at pediment slope, but fan-shaped middle terrace, as well as thick sediment exposed at low terrace, indicates that the unconsolidated sediments have been deposited in the alluvial fan environment. The drainage develops to the third-order drainage system, and the first and the second drainage system meet at right angles to each other and form a radial drainage pattern. In addition, the NE-SW direction lineaments can be identified on the basis of the curvature of the river and the step of the topographic relief, running over the Sinwoo site. The fault of $N30-35^{\circ}E/79-82^{\circ}SE$ shows ~ 5.8 m apparent vertical offset and dominantly reverse-slip sense based on slickenline, rotation of pebbles, and drag folding at footwall. However, some discontinuous sediments observed in the footwall are interpreted as fissure-filling materials due to the strike-slip movement. Now, we are under multidisciplinary investigations of additional field survey and age dating in order to determine the evolution of Sinwoo site fault during the Quaternary.