• Journal of the Korean Vacuum Society
• /
• v.14 no.4
• /
• pp.258-262
• /
• 2005

We report on the field emission properties from vertically aligned carbon nanotubes (CNTs) produced by a triode PECVD with a SiNx capping layer on metal catalyst. It is found that the CNTs density can be controlled by the capping layer thickness and decreases with increasing SiNx thickness. The CNT density of $\~$ 104/$cm^{2}$ exhibited highest electron emission characteristics, the threshold field of 1.2 V/$\mu$m and the current density of 0.17 mA/$cm^{2}$ at 3.6 V/$\mu$m. We have carried out investigation of electron emission stability under ambient gas of N2. The electron emission stability was improved with decreasing CNT density. Under $1\times$$10^{-5}$ Torr ambient pressure, the CNTs in 5 $\mu$m hole show electron emission current higher than $1\times$$10^{-4}$ A/cm2 and it's electron emission uniformity has $2\%$.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.244-250
• /
• 2013

We investigated green phosphorescent organic light-emitting diodes (PHOLEDs) with charge control layer (CCL) to produce high efficiency. The CCL and host material which was 4,4,N,N'-dicarbazolebiphenyl (CBP) of bipolar property can control the carrier movement in emitting layer (EML). The performance improvement by the insertion of CCL was realized to the well confined exciton and the reduced triplet exciton quenching effect in EML. Five types of devices (Device A, B, C, D, and E) were fabricated following the thickness of CCL within EML. The properties of device D using optimized thickness of CCL showed external quantum efficiency of 16.22% and luminous efficiency of 55.76 cd/A, respectively.

• Journal of Information Display
• /
• v.7 no.1
• /
• pp.35-40
• /
• 2006

Organic light-emitting diode (OLED) display panel using the charge-pump (CP) pixel addressing scheme was fabricated, and the results show that it is applicable for information display. A CP-OLED panel with 64 ${\times}$ 64 pixels consisting of thin-film capacitors and amorphous silicon Schottky diodes was fabricated using conventional thin-film processes. The pixel drive circuit passes electrical current into the OLED cell during most of the frame period as in the thin-film transistor (TFT)-based active-matrix (AM) OLED displays. In this study, the panel was operated at a voltage level of below 4 V, and this operation voltage can be reduced by eliminating the overlap capacitance between the column bus line and the common electrode.

• Journal of Information Display
• /
• v.12 no.4
• /
• pp.205-208
• /
• 2011

Herein, the integration of solution-processed polymer thin-film transistors (TFTs) that were fabricated using selective wettability through ultraviolet (UV) exposure into a reflective liquid crystal display is demonstrated. From the experimental results of energy-dispersive spectroscopy, the composition of carbon and fluorine enhancing the hydrophobicity in the polymer chains was found to play a critical role in the wetting selectivity upon UV exposure. The polymer TFTs fabricated through the wettability-patterning process exhibited long-term stability and reliability. This wetting-selectivity-based patterning technique will be useful for constructing different types of solution-processed electronic and optoelectronic devices.

• Journal of Information Display
• /
• v.12 no.1
• /
• pp.43-46
• /
• 2011

A three-dimensional windshield display (3D-WSD) can present driving information at the same depth as the objects in the outside scene. Herein, a super-multiview 3D-WSD is proposed because the super-multiview display technique provides smooth motion parallax. Motion parallax is the only physiological cue for perceiving the depth of a 3D image displayed at a far distance, which cannot be perceived by vergence and binocular parallax. A prototype system with 36 views was constructed, and the discontinuity of motion parallax and accuracy of depth perception were evaluated.

• Current Optics and Photonics
• /
• v.4 no.6
• /
• pp.524-529
• /
• 2020

We propose a depth-fused-type three-dimensional (3D) near-eye display implemented using a birefringent lens set that is made of calcite. By using a birefringent lens and image source (28.70 mm × 21.52 mm), which has different focal lengths according to the polarization state of the incident light, the proposed system can present depth-fused three-dimensional images at 4.6 degrees of field of view (FOV) within 1.6 Diopter (D) to 0.4 D, depending on the polarization distributed depth map. The proposed method can be applied to near-eye displays like head-mounted display systems, for a more natural 3D image without vergence-accommodation conflict.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2272-2278
• /
• 2011

The company which have deep-sea fishing vessel have to improve their voyage dashboard that was operating by manually to grasp sailing information of fishing vessel. This thesis design sailing information that is ship location on the globe, a catch of fish, and line of longitude and latitude to display on the map more visually by using on-line PC or DID (Digital Information Display). Thesis considered about designing web application which is available to visualize sailing information of 37 deep-sea fishing vessels in operation by using Flash-based RIA technology. This system was improving operator's and administrator's satisfaction of using information because, It make possible not only to grasp status of many vessels in one display but also to monitoring situation and deciding process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1330-1333
• /
• 2006

The channel shape of FFL(Flat Fluorescent Lamp) was designed by optical simulation. It was possible to design and manufacture the channel in any shape using glass forming. The best suitable brightness uniformity of 83.7% was achieved.

• Journal of Korean Library and Information Science Society
• /
• v.23
• /
• pp.329-362
• /
• 1995

Newspaper Article Information is an important source of information on social phenomenon with historical value. The development of computer and technology of information communication enables the construction of Newspaper Article Database by CTS and service through computer communication. It made it possible for the peoples to utilize the Newspaper Article Information easily. However, it is very difficult to utilize the currently prevailing system. There are differences in classification system of Newspaper Article Database and the Data Display Format. This survey aims to review the characteristics of Newspaper Article Database and current domestic computer communication service system. By comparing the classification system of Retrieval Menu and Data Display Format, I intended to suggest the standardized way of utilization which enables the users utilize them more easily and conveniently. The results of this survey is as follows : 1. More sub-divided distinction of classification item is required. 2. Separate classification item should be established for the distinction of article form which is very difficult to classify the subject. 3. Data Display Format should be equi n.0, pped with standardized format and signal which enables the users recognize it easily.

• Journal of Information Display
• /
• v.11 no.3
• /
• pp.100-108
• /
• 2010

A multi-user autostereoscopic display based on laser scanning is described in this paper. It does not require the wearing of special glasses; it can provide 3D to several viewers who have a large degree of freedom of movement; and it requires the display of only a minimum amount of information. The display operates by providing regions in the viewing field, referred to as "exit pupils," which follow the positions of the viewers' eyes under the control of a multi-user head tracker. The display incorporates an RGB laser illumination source that illuminates a light engine. The light directions are controlled by a spatial light modulator, and a front screen assembly incorporates a novel Gabor superlens. Its operating principle is explained in this paper, as is the construction of three iterations of the display. Finally, a method of developing the display into one that is suitable for television applications is described.