• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1456-1464
• /
• 2007

The research of skin-tone detection has been conducting continuously to enlarge the importance in security, surveillance and administration of the information and 'Password Control System' for using face and skin recognition in airports, harbors and general companies. As well as tile rapid diffusion of the application range in image communications and an electron transaction using wide range of communication network, the importance of the accurate detection of skin color has been augmenting recently. In this paper, it will set up the boundaries of skin colors using the information of Cb and Cr in YCbCr color model of human skin color which is from hundreds compiled portrait images for each race, and suggest a efficient yet simple structure about the skin detection which has been followed by whether the comprehension of the boundaries of skin or not with adaptive skin-range set. With the possibility of the 1D Processes which does not use any memory, it is able to be applied to relatively small-sized hardware and system such as mobile apparatuses. To add the selective mode, it is not only available the improvement of tie skin detection, but also showing the correspondent results about previous face recognition technologies using complicated algorithm.

• Journal of Intelligence and Information Systems
• /
• v.24 no.3
• /
• pp.177-198
• /
• 2018

Recently, as economic property it has become necessary to acquire and utilize the framework for water resource measurement and performance management as the property of water resources changes to hold "public property". To date, the evaluation of water technology has been carried out by feasibility study analysis or technology assessment based on net present value (NPV) or benefit-to-cost (B/C) effect, however it is not yet systemized in terms of valuation models to objectively assess an economic value of technology-based business to receive diffusion and feedback of research outcomes. Therefore, K-water (known as a government-supported public company in Korea) company feels the necessity to establish a technology valuation framework suitable for technical characteristics of water resources fields in charge and verify an exemplified case applied to the technology. The K-water evaluation technology applied to this study, as a public interest goods, can be used as a tool to measure the value and achievement contributed to society and to manage them. Therefore, by calculating the value in which the subject technology contributed to the entire society as a public resource, we make use of it as a basis information for the advertising medium of performance on the influence effect of the benefits or the necessity of cost input, and then secure the legitimacy for large-scale R&D cost input in terms of the characteristics of public technology. Hence, K-water company, one of the public corporation in Korea which deals with public goods of 'water resources', will be able to establish a commercialization strategy for business operation and prepare for a basis for the performance calculation of input R&D cost. In this study, K-water has developed a web-based technology valuation model for public interest type water resources based on the technology evaluation system that is suitable for the characteristics of a technology in water resources fields. In particular, by utilizing the evaluation methodology of the Institute of Advanced Industrial Science and Technology (AIST) in Japan to match the expense items to the expense accounts based on the related benefit items, we proposed the so-called 'K-water's proprietary model' which involves the 'cost-benefit' approach and the FCF (Free Cash Flow), and ultimately led to build a pipeline on the K-water research performance management system and then verify the practical case of a technology related to "desalination". We analyze the embedded design logic and evaluation process of web-based valuation system that reflects characteristics of water resources technology, reference information and database(D/B)-associated logic for each model to calculate public interest-based and profit-based technology values in technology integrated management system. We review the hybrid evaluation module that reflects the quantitative index of the qualitative evaluation indices reflecting the unique characteristics of water resources and the visualized user-interface (UI) of the actual web-based evaluation, which both are appended for calculating the business value based on financial data to the existing web-based technology valuation systems in other fields. K-water's technology valuation model is evaluated by distinguishing between public-interest type and profitable-type water technology. First, evaluation modules in profit-type technology valuation model are designed based on 'profitability of technology'. For example, the technology inventory K-water holds has a number of profit-oriented technologies such as water treatment membranes. On the other hand, the public interest-type technology valuation is designed to evaluate the public-interest oriented technology such as the dam, which reflects the characteristics of public benefits and costs. In order to examine the appropriateness of the cost-benefit based public utility valuation model (i.e. K-water specific technology valuation model) presented in this study, we applied to practical cases from calculation of benefit-to-cost analysis on water resource technology with 20 years of lifetime. In future we will additionally conduct verifying the K-water public utility-based valuation model by each business model which reflects various business environmental characteristics.

• Asia Marketing Journal
• /
• v.10 no.2
• /
• pp.1-29
• /
• 2008

The objective of our study is to provide an exploratory model for forecasting sales take-off timing of a product in the context of multi-national markets. We evaluated the usefulness of key predictors such as multiple market information, product attributes, price, and sales for the forecasting of sales take-off timing by applying the suggested model to monthly sales data for PDP and LCD TV provided by a Korean electronics manufacturer. We have found some important results for global companies from the empirical analysis. Firstly, innovation coefficients obtained from sales data of a particular product in other markets can provide the most useful information on sales take-off timing of the product in a target market. However, imitation coefficients obtained from the sales data of a particular product in the target market and other markets are not useful for sales take-off timing of the product in the target market. Secondly, price and product attributes significantly influence on take-off timing. It is noteworthy that the ratio of the price of the target product to the average price of the market is more important than the price ofthe target product itself. Lastly, the cumulative sales of the product are still useful for the prediction of sales take-off timing. Our model outperformed the average model in terms of hit-rate.

• Journal of Korean Academy of Nursing
• /
• v.11 no.2
• /
• pp.5-8
• /
• 1981

This study concerns itself with the development of a new model of comprehensive health service for rural communities of Korea. The study was conceived to resolve the problems of both underservice in rural communities and underutilization of valuable health manpower, namely the nurses, the disenchanted elite health personnel in Korea. On review of the current situation, the greatest deficiencies in the Korean health care system were found in the availability of primary care at the peripheries of md communities, in the dissemination of knowledge of disease prevention and health care, and in the induction of and guidance for active participation by the clientele in health maintenance at the personal, family and community level Abundant untapped health resources were identified that could be brough to bear upon the national effort to extend health services to every member of the Korean Population. Therefore, it was Postulated that the problem of underservice in rural communities of Korea can be structurcturally resolved by the effective mobilization and organization of untapped health resources, and that. a primary care Nursing Service System offers the best possibility for fulfillment of rural health service goals within the current health man-power situation. In order to identify appropriate strategies to combat the present difficulties in Korean rural health services and to utilize nurses and other health personnel in community-centered health programs, a search was made for examples of innovative service models throughout the world. An extensive literature survey and field visits to project sites both in Korea and in the United States were made. Experts in the field of world health, health service, planners, administrators, and medical and nursing practitioners in Korea, in the United States as well as visitors from other Asian countries were widely consulted. On the basis of information and inputs from these experts a new rural health service model has been constructed within the conceptual framework of community development, especially of the innovation diffusion Model. It is considered especially important that citizens in each community develop capacities for self-care with assistance and supports from available health professionals and participate in health service-related decisions that affect their own well-being. The proposed model is based upon the regionalization of health care planning utilizing a comprehensive Nursing Service System at the immediate delivery level The model features: (1) a health administration unit at each administrative level; (2) mechanisms for community participation; (3) a continuous source of primary health care at the local community level; (4) relative centralization of specialty care and provision of tertiary or super-specialty care only at major national metropolitan centers; and (5) a system for patient referral to the appropriate level of care. This model has been built around professional nurses as the key community health workers because their training is particularly suited and because large numbers of well-trained nurses are currently available and being trained. The special element in this model is a professional nurse-guided, self-care facilitating primary care Community Nursing Service System. This is supported by a Nursing Extension Service as a new training and support structure. (See attached diagrams). A broad spectrum of programs was proposed for the Community Nursing Service System. These were designed to establish a balance of activities between the clinic-centered individual care component and the field activity-centered educational and supportive component of health care services. Examples of possible program alternatives and proposed guidelines for health care in specific situations were presented, as well as the roles and functions of the key health personnel within the Community Nursing Service System. This Rural Health Service Model was proposed as a real alternative to the maldistributed, inequitable, uncoordinated solo-practice, physician-centered fee-for-service health care available to Koreans today.

• Asia pacific journal of information systems
• /
• v.20 no.1
• /
• pp.127-140
• /
• 2010

The benefit that a consumer derives from the use of a good often depends on the number of other consumers purchasing the same goods or other compatible items. This property, which is known as network externality, is significant in many IT related industries. Over the past few decades, network externalities have been recognized in the context of physical networks such as the telephone and railroad industries. Today, as many products are provided as a form of system that consists of compatible components, the appreciation of network externality is becoming increasingly important. Network externalities have been extensively studied among economists who have been seeking to explain new phenomena resulting from rapid advancements in ICT (Information and Communication Technology). As a result of these efforts, a new body of theories for 'New Economy' has been proposed. The theoretical bottom-line argument of such theories is that technologies subject to network effects exhibit multiple equilibriums and will finally lock into a monopoly with one standard cornering the entire market. They emphasize that such "tippiness" is a typical characteristic in such networked markets, describing that multiple incompatible technologies rarely coexist and that the switch to a single, leading standard occurs suddenly. Moreover, it is argued that this standardization process is path dependent, and the ultimate outcome is unpredictable. With incomplete information about other actors' preferences, there can be excess inertia, as consumers only moderately favor the change, and hence are themselves insufficiently motivated to start the bandwagon rolling, but would get on it once it did start to roll. This startup problem can prevent the adoption of any standard at all, even if it is preferred by everyone. Conversely, excess momentum is another possible outcome, for example, if a sponsoring firm uses low prices during early periods of diffusion. The aim of this paper is to analyze the dynamics of the adoption process in markets exhibiting network effects by focusing on two factors; switching and agent heterogeneity. Switching is an important factor that should be considered in analyzing the adoption process. An agent's switching invokes switching by other adopters, which brings about a positive feedback process that can significantly complicate the adoption process. Agent heterogeneity also plays a important role in shaping the early development of the adoption process, which has a significant impact on the later development of the process. The effects of these two factors are analyzed by developing an agent-based simulation model. ABM is a computer-based simulation methodology that can offer many advantages over traditional analytical approaches. The model is designed such that agents have diverse preferences regarding technology and are allowed to switch their previous choice. The simulation results showed that the adoption processes in a market exhibiting networks effects are significantly affected by the distribution of agents and the occurrence of switching. In particular, it is found that both weak heterogeneity and strong network effects cause agents to start to switch early and this plays a role of expediting the emergence of 'lock-in.' When network effects are strong, agents are easily affected by changes in early market shares. This causes agents to switch earlier and in turn speeds up the market's tipping. The same effect is found in the case of highly homogeneous agents. When agents are highly homogeneous, the market starts to tip toward one technology rapidly, and its choice is not always consistent with the populations' initial inclination. Increased volatility and faster lock-in increase the possibility that the market will reach an unexpected outcome. The primary contribution of this study is the elucidation of the role of parameters characterizing the market in the development of the lock-in process, and identification of conditions where such unexpected outcomes happen.

• Journal of Information Technology Applications and Management
• /
• v.20 no.1
• /
• pp.43-51
• /
• 2013

Human being does work to live out and they have their private life because human has sociality. Both work and life are important to live out but they are on the trade-off relationship. Because keeping the balance between work and life is too hard, it has been interested by academic and practical areas. Definition of Work-life balance here is that balance or imbalance arising between work and life has no negative impact on their daily life. Above all, Work-life balance is important because it is strongly related to identity. Recently, the introduction of the mobile office system has emerged as a way to solve the problem of work-life balance. It is based on the teleworking which was formerly generated. Teleworking is to perform the work in the employee's home or office space set aside without going into the workplace. Concept of the mobile office system here is not only using portable devices during work for convenience but also the system which is designed for the performance. Thanks to the diffusion of smart devices(smart phone, tablet pc), mobile office system has been spread. Although the importance of mobile office systems is emerging, there are few researches about it. Even they mostly focus on the standpoint of performance of mobile office system. However, Quality of life is as important as the performance. As a part of Quality of Life field, Work-life balance is the closest to employee's quality of life. So this study aims to examine the effect of the use of mobile office systems on work-life balance. To do so, we try to find factors effecting Work-life balance from existing studies and then set a research model. We set the use of mobile office systems as independent variables which are divided by use of function, use by location and use by situation. There are four dependent variables - sense of self command, sense of balance, solving work problem, solving life problem. We collected data from employees who are using mobile office systems on their job. 215 people were participated in the survey and we used multiple regression analysis to verify our research model. Results show that every independent variable has no impact on solving work problem while they have slight impact on the other dependent variables. Especially use on the business trip has significant effect on dependent variables. It means that there is a possibility use of mobile office system could control the employee's quality of life and system should be evolved until it covers even critical tasks. Also, support for mobile office system -education, encouragement-should be provided. By mobile office system is maturing, future research would be done.

• Journal of Environmental Science International
• /
• v.28 no.3
• /
• pp.341-356
• /
• 2019

In this study, the impacts of local meteorology caused by tidal changes in the West Sea on ozone distributions in the Seoul Metropolitan Area (SMA) were analyzed using a meteorological model (WRF) and an air quality (CMAQ) model. This study was carried out during the day (1200-1800 LST) between August 3 and 9, 2016. The total area of tidal flats along with the tidal changes was calculated to be approximately $912km^2$, based on data provided by the Environmental Geographic Information Service (EGIS) and the Ministry of Oceans and Fisheries (MOF). Modeling was carried out based on three experiments, and the land cover of the tidal flats for each experiment was designed using the coastal wetlands, water bodies (i.e., high tide), and the barren or sparsely vegetated areas (i.e., low tide). The land cover parameters of the coastal wetlands used in this study were improved in the herbaceous wetland of the WRF using updated albedo, roughness length, and soil heat capacity. The results showed that the land cover variation during high tide caused a decrease in temperature (maximum $4.5^{\circ}C$) and planetary boundary layer (PBL) height (maximum 1200 m), and an increase in humidity (maximum 25%) and wind speed (maximum $1.5ms^{-1}$). These meteorological changes increased the ozone concentration (about 5.0 ppb) in the coastal areas including the tidal flats. The increase in the ozone concentration during high tide may be caused by a weak diffusion to the upper layer due to a decrease in the PBL height. The changes in the meteorological variables and ozone concentration during low tide were lesser than those occurring during high tide. This study suggests that the meteorological variations caused by tidal changes have a meaningful effect on the ozone concentration in the SMA.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.287-293
• /
• 2018

The Korean peninsula has been known as an area that is free of volcanic disasters. However, recent observations and research results of volcanoes in Far East Asia, including Baedu Mountain and Japanese volcanoes, show that the Korean peninsula is no longer a safe area from volcanic disasters. Since 2012, the Korean government has been developing an IT-based construction technology, VDRS (Volcanic Disaster Response System), for effective volcanic disaster response system. The main users of VDRS are public officers in central or local governments. However, most of them have little experience and knowledge about volcanic disasters. Therefore, it is essential to develop education contents and implement training on volcanic disaster response for effective response in a real disaster situation. In this paper, we deal with the development of a mobile application based on virtual reality (VR) for realistic volcanic disaster response training. The objectives of training are the delivery of knowledge and experience for volcanic disasters. First, VR contents were generated based on spatial information. A 3D model was constructed based on a Digital Elevation Model (DEM), and visualization models for meterological effects and various volcanic disaster diffusion effects were implemented for the VR contents. Second, the mobile application for the volcanic disaster response training was implemented. A 12-step story board is proposed for volcanic disaster experience. The application was developed with the Unity3D engine based on the proposed story board to deliver knowledge of various volcanic disasters (volcanic ash, pyroclastic flows, volcanic mudflow etc.). The results of this paper will be used for volcanic disaster response and prevention training and for more realistic training linked with augmented reality technology in the future.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.111-117
• /
• 2021

This research work is to suggest the experimental results capable of solving an initial unsuitability of combustion and environment in a constant volume combustion chamber by using LFG(Land Fill Gas) which consists of 40% CO₂ and 60% CH₄. The experimental condition is set as 0.9~1.6 of air-fuel ratio, 3bar of combustion pressure, 25℃ of room temperature, methane for using gas, and 2.5~4.5 of Pre-chamber hole sizes. As a result, it can be seen that diffusion of initial flame is significantly increased by M3.0 model comparing with other one. The reason for the characteristics is that orifice effect is extremely improved by 0.9, 1.0, and 1.2 of air-fuel ratio comparing with other one. Consequently, this experiment is shown that M3.0 model is partially capable of improving combustion performance than a conventional ignition plug in case of applying to LFG with Pre-chamber design.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.103-119
• /
• 2023

Since the Korean government has decided to apply the policy of BIM (Building Information Modeling) to the entire construction industry, it has experienced a positive trend in adoption and utilization. BIM can reduce workloads by building model objects into libraries that conform to standards and enable consistent quality, data integrity, and compatibility. In the domestic architecture, civil engineering, and the overseas landscape architecture sectors, many BIM library standardization studies have been conducted, and guidelines have been established based on them. Currently, basic research and attempts to introduce BIM are being made in Korean landscape architecture field, but the diffusion has been delayed due to difficulties in application. This can be addressed by enhancing the efficiency of BIM work using standardized libraries. Therefore, this study aims to provide a starting point for discussions and present a classification system for objects and attribute information that can be referred to when creating landscape libraries in practice. The standardization of landscape BIM library was explored from two directions: object classification and attribute information items. First, the Korean construction information classification system, product inventory classification system, landscape design and construction standards, and BIM object classification of the NLA (Norwegian Association of Landscape Architects) were referred to classify landscape objects. As a result, the objects were divided into 12 subcategories, including 'trees', 'shrubs', 'ground cover and others', 'outdoor installation', 'outdoor lighting facility', 'stairs and ramp', 'outdoor wall', 'outdoor structure', 'pavement', 'curb', 'irrigation', and 'drainage' under five major categories: 'landscape plant', 'landscape facility', 'landscape structure', 'landscape pavement', and 'irrigation and drainage'. Next, the attribute information for the objects was extracted and structured. To do this, the common attribute information items of the KBIMS (Korean BIM Standard) were included, and the object attribute information items that vary according to the type of objects were included by referring to the PDT (Product Data Template) of the LI (UK Landscape Institute). As a result, the common attributes included information on 'identification', 'distribution', 'classification', and 'manufacture and supply' information, while the object attributes included information on 'naming', 'specifications', 'installation or construction', 'performance', 'sustainability', and 'operations and maintenance'. The significance of this study lies in establishing the foundation for the introduction of landscape BIM through the standardization of library objects, which will enhance the efficiency of modeling tasks and improve the data consistency of BIM models across various disciplines in the construction industry.