• 한국디지털건축인테리어학회논문집
• /
• 제11권4호
• /
• pp.29-38
• /
• 2011

In this study, neighborhood facility and office building to target two cases were performed BIM process. In the initial design phase of the planning process was conducted for the BIM process modeling, BIM in the design stage while performing the required range and level of the process were studied. Accordingly, from architectural firms to leverage BIM process, the proposed methods, efficient use of the modeling process proposed. Quality management information and input for the modeling and design process should be determined from the initial design and construction, including, for each field should be considered BIM, which require an appropriate range of information, according to these requirements, BIM creation and expansion of the level of information should be clearly defined. Perform the procedure for BIM in the process of communicating with stakeholders is critical. In addition, the input data and output data needed to perform management and to perform at the level obtained BIM design process and the model should be clear.

• 디자인학연구
• /
• 제13권
• /
• pp.212-221
• /
• 1996

The necessity of imformation on product design process is increased in recently years, because a product can be called a mass of information and becomes more complex as long as technology is developed. But the present product development method is like a relay race. In this sequential process, information is transferred from one department to other departments like \"over the wall\". And communication gaps among departments are generated, so imformation cannot be controlled very well. Therefore it is needed to innovate the design process. The information system proposedin this study is an application software which can be useful for integrated product design process. It has been developed primarily for use in IBN PC and windows environment. It comprises four functional modules; functions of handing the overall project information (document, ideaskech, rendering, drawing); functions of decision making production problems in design project process; functions of groupware which can link with other departments; functions of comprehensive database with production.roduction.

• 시스템엔지니어링학술지
• /
• 제3권2호
• /
• pp.39-48
• /
• 2007

In this study, an overall product design process will be presented by using the Analytic Hierarchy Process(AHP) and robust design. From the conceptual design stage, the logical methods are used to select the appropriate concepts satisfying the customer requirements and the other conditions. The next phase is the embodiment design phase in which the deterministic and robust design approach are used to obtain the improvement in product design. Typically, this approach is applied for developing the simple bookshelf design. The results show the efficient approach which can be supported to develop the new product.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1165-1170
• /
• 2005

This paper describes an information model, devised to manage roadway design information and to improve the collaboration among the multidisciplinary design teams. An analysis concerning the workflow, the rules and the functions of current roadway design was conducted. A process model based on the result of the analysis was developed by utilizing IDEF0 methodology. The process model reflects the interdependencies among multidisciplinary design disciplines and is capable of managing communication processes. This paper also discusses the design information hierarchy and the component representation schemes for systematic design information management. It is anticipated that the proposed information model would be able to improve the overall process of design of roadway construction projects by managing design information and helping the participants communicate and share information of the project effectively.

• 건축역사연구
• /
• 제22권2호
• /
• pp.31-42
• /
• 2013

This study identifies the current status of hanok design process and required design information through individual survey and interview with hanok architects and builders to suggest a proposal. Current design system turns out to be a common design process not reflecting hanok's unique mechanism of production. The proposal consists of the alternative design process, 'Initial survey / Site and structural planning / Spatial layout and form / Openings, interior and exterior elements design / Detail design', containing the specialty of hanok's mechanism, and the lists of design information required in its each stage. The proposed design process also emphasizes the significance of consultation in a way of designing coordination, and classifies the specific contents for each consultation moments. The study is expected to contribute for architects including the group who are not specialized in hanok to improve the architectural quality by following the systematic design process. Also the design system provides a framework to organize the vast range of design information being recently developed in the technique-oriented area.

• 한국실내디자인학회논문집
• /
• 제16권6호
• /
• pp.19-27
• /
• 2007

As AEC(architecture, engineering and construction) industry becomes larger and more complex, much information is going into each part and phase. Therefore, the existing building design process has to change and collaboration is emphasized among participants in various fields. The purpose of this study is to compare and analyze existing building design process and integrated building design process based on BIM using a IDEF0 methodology. And then, it establishes a desirable domestic integrated building design process application plan focusing on the design phase of domestic cases. As a result of analysis, flowing conclusions are included ; Firstly, problems occur on the existing building design process that are accomplished with focusing on the outcome. It makes much errors because of 2D-based information. Another problems is that collaboration doesn't go on smoothly. But, integrated building design process is accomplished with the collaboration and the coordination which pursues change and perfects cooperation. Secondly, BIM is a process of effecting optimum integrating, re-using information, and expense reduction throughout the life-cycle of a building. Moreover, it establishes a basis for the integrated building design process to build a collaboration system.

• 대한건축학회연합논문집
• /
• 제21권4호
• /
• pp.15-26
• /
• 2019

In recent years, researchers are increasingly trying to use BIM-based 3D models for BIM nD design such as 4D (3D + Time) and 5D (4D + Cost). However, there are still many problems in efficiently using process management based on the BIM information created at each design stage. Therefore, this study proposes a method to automate 4D and 5D design support in each design stage by using BIM-based Dynamo algorithm. To do this, I implemented an algorithm that can automatically input the process information needed for 4D and 5D by using Revit's Add-in program, Dynamo. In order to support the 4D design, the algorithm was created to enable automatic process simulation by synchronizing process simulation information (Excel file) through the Navisworks program, BIM software. The algorithm was created to automatically enable process simulation. And to support the 5D design, the algorithm was developed to enable automatic extraction of the information needed for mass production from the BIM model by utilizing the dynamo algorithm. Therefore, in order to verify the 4D and 5D design support algorithms, we verified the applicability through consultation with related workers and experts. As a result, it has been demonstrated that it is possible to manage information about process information and to quickly extract information from design and design changes. In addition, BIM data can be used to manage and input the necessary process information in 4D and 5D, which is advantageous for shortening construction time and cost. This study will make it easy to improve design quality and manage design information, and will be the foundation for future building automation research.

• Asia pacific journal of information systems
• /
• 제26권4호
• /
• pp.477-488
• /
• 2016

New technology development capability plays a key role in making small- and medium-sized enterprises (SMEs) increase their innovation performance, such as in product or process innovation. To examine the influencing factors of SMEs' new technology development capability, this study empirically analyzes the mediating effects of SMEs' process design capability and product interior design capability on the positive association between their external information network diversity and new technology development capability. This study performs the ordinary least squares regression on a sample of 2,000 South Korean SMEs. Results reveal that SMEs' process design capability fully mediates, and product interior design capability partially mediates the positive association between the external information network diversity and new technology development capability.

• 시스템엔지니어링학술지
• /
• 제3권1호
• /
• pp.41-48
• /
• 2007

This paper presents a design methodology for developing a new push scooter. A case study is clone with effective planning processes to ensure the product quality under the different phases of a product design process. Parametric model based design process simulation and optimization is implemented by using ANSYS application tool. The relationship matrix and decision matrix are drawn by using several methods. The simulation results for deterministic design and robust design are compared. This entire design process phase can support the design and quality improvements for a new product development.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권8호
• /
• pp.2831-2845
• /
• 2022

Compared to the significant approach of project-based learning research, a data-driven design project-based learning has not reached a meaningful consensus regarding the most valid and reliable method for assessing design creativity. This article proposes an advanced information data-interactive learning system for creative design using a service design process that combines a design thinking. We propose a service framework to improve the convergence design process between students and advanced information data analysis, allowing students to participate actively in the data visualization and research using patent data. Solving a design problem by discovery and interpretation process, the Advanced information-interactive learning framework allows the students to verify the creative idea values or to ideate new factors and the associated various feasible solutions. The student can perform the patent data according to a business intelligence platform. Most of the new ideas for solving design projects are evaluated through complete patent data analysis and visualization in the beginning of the service design process. In this article, we propose to adapt advanced information data to educate the service design process, allowing the students to evaluate their own idea and define the problems iteratively until satisfaction. Quantitative evaluation results have shown that the advanced information data-driven learning system approach can improve the design project - based learning results in terms of design creativity. Our findings can contribute to data-driven project-based learning for advanced information data that play a crucial role in convergence design in related standards and other smart educational fields that are linked.