• Journal of Powder Materials
• /
• v.10 no.2
• /
• pp.83-88
• /
• 2003

Nanocrystalline materials of Ni and Ni-Cu alloy have been synthesized by the pulsed wire evaporation (PWE) method and these abnormal magnetic properties in the magnetic ordered state have been characterized using both VSM and SQUID in the range of high and low magnetic fields. Ni and Ni-Cu particles with an average size of 20 to 80 nm were found to influence magnetic hysterisis behavior and the results of powder neutron diffraction patterns and saturation magnetization curves are shown to indicate the absence of the NiO phase. The shifted hysterisis loop and irreversibility of the magnetization curve in the high field region were observed in the magnetic-ordered state of both Ni and Ni-Cu. The virgin magnetization curve for Ni slightly spillover on the limited hysterisis loop ($\pm$20kOe). This irreversibility in the high field of 50 kOe can be explained by non-col-linear behavior and the existence of the metastable states of the magnetization at the surface layer (or core) of the particle in the applied magnetic field. Immiscible alloy of Cu-Ni was also found to show irreversibility having two different magnetic phases.

• Journal of Nutrition and Health
• /
• v.23 no.7
• /
• pp.504-512
• /
• 1990

In experiment 1, dietary self-selection of the 3 macronutrients, protein, fat, and carbohydrate were examined in male rats given 3 food cups of 80% carbohydrate, 80% protein, and 70% fat diets simultaneously. All the rats showed normal growth pattern and organ weight, which means they have ability to select just right kinds and amounts of nurients in order to support their growth and development. Mean values of caloric intake, body weight gain, serum lipid values and empty carcass compositions were not significantly differ between the upper and lower quartile groups of fat proportion of empty carcass compared to the lower quartile group(LF). Same feeding design was employed in experiment 2 where the effect of mild electric stress on food selection was studied. The rats in both control and electric stress group revealed a normal growth curve and organ weights. The rats in both control and electric stress group revealed a normal growth curve and organ weights. The stress group showed higher caloric intake and body weight gain than control group, but no significant effects of stress on serum and empty carcass components was found. Even though normal rats seemed to select macronutrients according to their physiolosical needs, there were individual differences in food selection whether they were exposed to stress or not. Therefore life long individual food selection pattern may have a great influence on nutritional status and chronic degenerative diseases of eldery, and on aging process.

• Journal of Information Display
• /
• v.7 no.1
• /
• pp.25-29
• /
• 2006

By the voltage threshold (Vt) close-curve measurement method, the changes in the discharge characteristics such as a firing voltage and IR emission among the three electrodes were examined relative to the low or high panel temperature ranging from -10 to $80^{\circ}$. The variation in the panel temperature was found significantly influence the surface discharge between the MgO surfaces rather than the plate gap discharge between the MgO and phosphor layers. Based on this experimental observation, a modified reset waveform that alleviates the surface discharge during a ramp-up and -down period was deeloped. By adopting the proposed reset waveform, a stable address discharge could be obtained irrespective of the panel temperature variation.

• Journal of the Korean Society of Costume
• /
• v.44
• /
• pp.235-247
• /
• 1999

The influences of Art nouveau and Art Deco are as follow: The first, in the side of silhouette, hourglass style and bell shaped skirt influence on mordern fashion chiefly and S-curve style was mollified. Empire style, hobble style in art deco age are all showed diversely, in these styles especially boyish style give an outstanding trasts to modern fashion. The second, the color of art deco, characterized by pastel in art nouveau's color tone, original color and black and gold was reflected on the textile design and showed diversely in the color fo modern fashion. The third, in the field of textile and pattern, flower and plant which was a motive of art nouveau style, organic curve and geometrical pattern and exotic motive was seperately used with motive in the pattern and design of mordern. Textile of goldish and silver tone, metal stuff, lace embroidery, fur, artifical flower, feather etc. showed up on the many parts of clothing. Like this Art Nouveau and Art style not only had a great effect on the costume but also decorations and formative arts.

• Advances in environmental research
• /
• v.2 no.1
• /
• pp.35-49
• /
• 2013

Research work on removal of fluoride from water, referred to as water defluoridation, has resulted into the development of a number of technologies over the years but they suffer from either cost or efficiency drawbacks. In this work, enhancement effects of phosphate and silicate on defluoridation of water by low-cost Plaster of Paris (calcined gypsum) were studied. To our knowledge, the influence of silicate on defluoridation was not reported. It was claimed, that the presence of some ions in the treated water samples, was decreasing the fluoride removal since these ions compete the fluoride ions on occupying the available adsorption sites, however, phosphate and silicate ions, from its sodium slats, have enhanced the fluoride % removal, hence, precipitation of calcium-fluoro compounds of these ions can be suggested. Percentage removal of $F^-$ by neat Plaster is 48%, the electrical conductance (EC) curve shows the typical curve of Plaster setting which begins at 20 min and finished at 30 min. The addition of phosphate and silicate ions enhances the removal of fluoride to high extent > 90%. Thermodynamics parameters showed spontaneous fluoride removal by neat Plaster and Plaster-silicate system. The percentage removal with time showed second-order reaction kinetics.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.6
• /
• pp.834-844
• /
• 2000

In this study, an off-design performance analysis procedure is developed based on Two-zone model and TEIS model. In Two-zone model, there are both primary zone and secondary zone for an isentropic core flow and an average of all non-isentropic streamtubes respectively. The level of the core flow diffusion in an impeller is calculated by using TEIS model which regards the impeller as two successive rotating elements in series. At impeller exit, the mixing process occurs with an increase in entropy, that is to say, a decrease in total pressure. In loss models including Two-zone and TEIS model, some empirical parameters have a great influence on overall performance curve. So these parameters' influences on the overall performance curve are investigated and compared with experimental data.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.5
• /
• pp.305-311
• /
• 2002

Optical measurements have been used to study the biaxial tensile strain in heteroeptaxial ZnTe epilayers on the (100) GaAs substrate by hot wall epitaxy (HWE) with Zn reservoir. It is effect on the low-temperature photoluminescence spectrum of the material. Optimum growth condition has been determined by a four-crystal rocking curve (FCRC) and a low temperature photoluminescence measurement (PL). It was found that Zn partial pressure from Zn reservoir has a strong influence on the quality of grown films. Under the determined optimum growth condition, ZnTe epitaxial films with thickness of 0.72~24.8$\mu\textrm{m}$ were grown for studying the effect of the thickness on crystalline quality. The PL and FCRC results indicated that the quality of ZnTe films becomes higher rapidly with increase of thickness up to 6$\mu\textrm{m}$. The best value of the FWHM of the four crystal rocking curve, 66 arcsec, was obtained on the film with 12$\mu\textrm{m}$ in thickness. The PL spectrum shows the splitted strong free exciton emissions and very weak deep band emissions. These results show the high quality of films.

• Journal of Preventive Medicine and Public Health
• /
• v.48 no.2
• /
• pp.111-117
• /
• 2015

Objectives: While epidemiologic research indicates that the prevalence of risk-taking behaviors including cigarette smoking among young people with asthma is substantial, the longitudinal patterns of cigarette smoking in this vulnerable population have received little attention. The aim of this study was to evaluate differences in the longitudinal trajectories of cigarette use behaviors from adolescence to adulthood between young people with and without asthma. Methods: Data from the National Longitudinal Study of Adolescent to Adult Health (Add Health) during the years 1994 to 1995 (Wave I, adolescence), 2001 to 2002 (Wave III, young adulthood), and 2007 to 2008 (Wave IV, adulthood) were analyzed (n=12 244). Latent growth curve models were used to examine the longitudinal trajectories of cigarette use behaviors during the transition to adulthood according to asthma status. Results: Regardless of asthma status, the trajectory means of cigarette use behaviors were found to increase, and then slightly decrease from adolescence to adulthood. In total participants, there were no statistically significant differences in initial levels and changes in cigarette use behaviors according to asthma status. However, in select sex and race subgroups (i.e., females and non-whites), former asthmatics showed greater escalation in cigarette use behaviors than did non-asthmatics or current asthmatics. Conclusions: This study indicated that the changing patterns of cigarette use behaviors during the transition to adulthood among young people with asthma are comparable to or even more drastic than those among young people without asthma.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.1
• /
• pp.159-165
• /
• 2005

Shot peening can be defined as the process of work hardening of the surface of components by means of propelled stream of spherical shot. Benefits due to shot peening are increase in resistance to fatigue, stress corrosion cracking, fretting, galling, erosion and closing of pores. In this study, the influence of shot peening on the corrosion was investigated on spring steel immersed in $3.5\%\;NaCl$. The immersion test was performed on the two kinds of specimens. Corrosion potential, polarization curve, residual stress and etc. were investigated from experimental results. From test results, the effect of shot peening on the corrosion was evaluated. The important results of the experimental study on the effects of shot peened spring steels on the environment corrosion are as follows; In case of corrosion potential, shot peened specimen shows more activated negative direction as compared with parent metal. Surface of specimen, which is treated with the shot peened, is placed as more activated state against inner base metal. It can cause the anti-corrosion effect on the base metal.

• Journal of Korean Society on Water Environment
• /
• v.28 no.5
• /
• pp.693-703
• /
• 2012

Load Duration Curve(LDC) is a useful tool for analyzing water quality characteristics under various stream flow conditions. This study investigated the methods to identify impaired waterbodies in the assessment of water quality goal attainment by using LDC for the management of Total Maximum Daily Loads (TMDLs). Three methods were proposed. Non-typical regime exclusion method is a method to exclude water quality observations in the non-typical extreme flow conditions in order to minimize the influence of non-ordinary water quality. Flow regime weighted average method is a method to calculate weighted mean water quality instead of arithmetic mean in order to consider water characteristics properly on stream flow regime in addition to the effect of Non-typical regime exclusion method. Load exceeded interval comparison method is a method to compare the intervals between the attained and non-attained load duration periods on the LDC. The assessment of water quality goal attainment can be performed more reasonably and precisely considering water quality variations on stream flow conditions by applying these proposed methods.