• 한국컴퓨터정보학회논문지
• /
• 제23권1호
• /
• pp.123-129
• /
• 2018

The purpose of this paper is to investigate the influence of utilitarian, hedonic and social motivations on continuance intention to use cloud services. To do this, this study built a research model and examined how ease of use, usefulness, enjoyment, social influence affect the continuance usage intention of cloud services. The survey method was used for this paper, and data from a total of 82 university students were used for the analysis. And structural equation model was used to analyze the data. The results of this empirical study is summarized as followings. First, enjoyment has a direct effect on the continuance usage intention of cloud services. Second, social influence has a direct effect on the continuance usage intention. Further, it will provide meaning suggestion point of the importance of not only utilitarian motivation but also hedonic and social motivations in establishing the use policy of cloud services.

• 한국주거학회논문집
• /
• 제12권4호
• /
• pp.105-113
• /
• 2001

This research indicates to controversial point that store equipments were not applying correct development factor in the each apartment house by that change rate by scale and uniformity of form and inefficiency, effect of discount store is increasing in apartment house and progressed research. The result are as follows; First, interior main point of store of that influence greatly to change rate number of store be. Second, being lot area in jar in outside factor of store. Third, discount store separation appeared by leading person who influence greatly to change rate in middle who is contiguity market singleness residential quarter and contiguity existence of commercial district and nonexistence and discount store separation of only outside right near at hand. Construction of commerce equipment may have to consist in practical apartment house after examine various kinds factor such as store indoor, store outside and only outside while plan practical use of systematic and efficient commerce equipment focusing more in efficient utilization of commerce institution that consist after plan that is not planed commerce equipment focusing in development in plan of commerce equipment in apartment house hereafter accordingly.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.245-252
• /
• 2000

Model tests on free standing pile groups and piled footings with varying a pile spacing in two layered soils are carried out. The influence of pile cap on the behaviors of end bearing pile groups is analyzed by comparing the bearing behavior in piled footings with those in a single pile, a shallow footing(cap alone) and free standing pile groups. From the test results, it is found that the bearing characteristics of cap-soil-pile system are related with load levels and pile spacings. Before yield, the bearing resistance by cap is not fully mobilized, however, as the applied load increases, the bearing resistance of cap approaches to that of cap alone and settlement hardening occurs after yield due to the compaction caused by the contact pressure between cap and soil. By the cap-soil-pile interaction, shaft friction and point resistance of piles considerably increase with dependency of pile spacings. In two layered soil, the increasing effect of dilatancy in dense sandy soil adjacent to pile tips, increases the point resistance of pile.

• 한국생산제조학회지
• /
• 제24권5호
• /
• pp.514-520
• /
• 2015

The effects of suspension stiffness on the reaction load of the gearbox suspension for a three-point suspension wind turbine drive train were investigated by finite element analysis. The reaction forces of the gearbox suspension appear to increase as the gearbox suspension stiffness increases; however, the main bearing stiffness has a reverse effect on the reaction forces. The influence of the gearbox suspension stiffness is greater than that of the main bearing. Since the suspensions must provide the gearbox with proper support, it is not practical to use soft gearbox suspension for small reaction forces. It is more feasible to use stiff main bearings. As a guideline for the main bearing stiffness in the present study, we propose a relative stiffness of 100-150% of the reference.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1210-1216
• /
• 2001

The impinging tones by high-speed plane jets are investigated for the characteristics of edgetone generation based on experimental observations. Experiment has been performed for edgetones with a slit nozzle and a wedge system. The jet in the experiment is varied from low to high subsonic speed to obtain the effect of the speed on the frequency characteristics of impinging tones. The experimental data obtained previously for edgetones and platetones by various nozzles are compared with the present edgetone data for the condition of tone generation, the frequency ranges and the effective source point. It is found that the jet speed has no fundamental influence on the impinging tone characteristics. Regardless of the jet speed, the effective source point is about a quarter wavelength downstream from the edge tip. With increase in jet speed, the influence of the nozzle configuration is decreased and the operating frequencies show good coincidencies by normalized parameters based on the slit thickness.

• 한국생산제조학회지
• /
• 제24권3호
• /
• pp.278-286
• /
• 2015

The effects of the main bearing stiffness combined with vertical non-torque force on the input load and shaft deflection of a gearbox were investigated for the three-point suspension drive train of a wind turbine. A finite element analysis model for the drive train was studied experimentally, and its applicability to the present study was verified. The results show that, as the main bearing stiffness is increased, the input load of the gearbox decreases, whereas the input shaft deflection increases. The stiffness component for the pitch moment has the largest influence on the gearbox input load. Although the gearbox life increases at a higher main bearing stiffness, the economic efficiency and durability of the entire drive train system should also be considered in the selection of the main bearing stiffness.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.146-147
• /
• 2007

A universal four-point contact measurement method, has an advantage of non-existence of contact resistance, is demonstrated by the experiments with carbon nanotubes and ZnO nanowire. Ti/Au and Pt are tried to compare the influence of contact resistance between two different metals. These metals are selected to make Ohmic contact and Schottky contact originated from their different work functions. For precise experiments, Ti/Au and Pt are separately evaporated to form double 'four-point contact electrodes' on CNTs or ZnO, and the voltage-current characteristics are measured. This method can be applied to universal resistivity measurement for nanotubes and nanowires.

• Computers and Concrete
• /
• 제16권4호
• /
• pp.605-623
• /
• 2015

A coupled experimental and numerical study of shear fracture in the edge-notched beam specimens of quasi-brittle materials (concrete-like materials) are carried out using four point bending flexural tests. The crack initiation, propagation and breaking process of beam specimens are experimentally studied by producing the double inclined edge notches with different ligament angles in beams under four point bending. The effects of ligament angles on the shear fracturing path in the bridge areas of the double edge-notched beam specimens are studied. Moreover, the influence of the inclined edge notches on the shear-fracture behavior of double edge-notched beam specimens which represents a practical crack orientation is investigated. The same specimens are numerically simulated by an indirect boundary element method known as displacement discontinuity method. These numerical results are compared with the performed experimental results proving the accuracy and validity of the proposed study.

• 열처리공학회지
• /
• 제8권1호
• /
• pp.65-74
• /
• 1995

This research was performed to investigate the effect of ageing on grain refinement of 82wt%Cu-13.5wt%Al-4.5wt%Ni-0.1wt% misch metal alloy with ageing temperature and time. The results obtained in this study are as follows; The variation of transformation temperature with ageing temperature had very influence on ageing time at $300^{\circ}C$. But it had not influence on ageing time at $100^{\circ}C$. The variation of transformation temperature after second reversed transformation cycle was not occured in martensitic phase ageing, but $M_s$ point was appeared equally with third reversed transformation cycle in parent phase ageing. The variation of $M_s$ point was not nearly with ageing time at $100^{\circ}C$ ageing temperature. But it was decreasing with ageing time at $300^{\circ}C$ ageing temperature and $A_s$ point was increasing with ageing time. Structure of parent phase ageing was being M18R martensitic and N2H martensitic phase. It was found that ${\alpha}$ and ${\gamma}_2$ phase were created by ageing of long time at $300^{\circ}C$ ageing temperature.

• 품질경영학회지
• /
• 제49권4호
• /
• pp.569-579
• /
• 2021

Purpose: The purpose of this study is the time series analysis for predicting the yield of crops applicable to each farm using environmental variables measured by smart farms cultivating tomato. In addition, it is intended to confirm the influence of environmental variables using a deep learning model that can be explained to some extent. Methods: A time series analysis was performed to predict production using environmental variables measured at 75 smart farms cultivating tomato in two periods. An LSTM-based encoder-decoder model was used for cases of several farms with similar length. In particular, Dual Attention Mechanism was applied to use environmental variables as exogenous variables and to confirm their influence. Results: As a result of the analysis, Dual Attention LSTM with a window size of 12 weeks showed the best predictive power. It was verified that the environmental variables has a similar effect on prediction through wieghtss extracted from the prediction model, and it was also verified that the previous time point has a greater effect than the time point close to the prediction point. Conclusion: It is expected that it will be possible to attempt various crops as a model that can be explained by supplementing the shortcomings of general deep learning model.