• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.159-163
• /
• 2005

The propriety between suppliers and demanders in geometric design is very important. Although the final purpose of constructing roads is to concern about the driver s comfort, unfortunately, it has not been considered so far. We've considered the regularity and quickness in considering driver's comfort but there should be considered the safety for the accident as well. If drivers are appeared to be more speeding than designer's intention, there will be needed some supplements to increase the safety rate for the roads. Even if both an upward and downward section are supposed to exist at the same time for solid geometry of the roads like this, it is true that the recent design for the 3-D solid geometry section has been done as flat 2-D and the minimum plane curve radius and the maximum cant have been decided just by calculating without considering operating speed between an upward and downward section at the same point. In this investigation, thus, I'd like to calculate the safety of the cant by considering the speed features of the solid geometry for the first lane of four lane rural roads. To begin with, we investigated the driving speed of the car, which is not been influenced by a preceding car to analyze the influence of the geometrical structure by using Nc-97. Secondly, we statistically analyzed the driving features of the solid geometry after comparing the 6 sections, that is, measuring the driving speed feature at 12 points and combining the influence of the vertical geometry and plane geometry to the driving speed of the plane curve which was researched before. Finally, we estimated the value of cant which considers the driving speed not by using it which has applied uniformly without considering it properly, though there were some differences between a designed speed and driving speed through the result of the basic statistical analysis but by introducing the new safety rate rule, a notion of ${\alpha}$. As a result of the research, we could see the driving features of the car and suggest the safety rate which considers these. For considering the maximum cant, if we apply the safety rate, the result of this experiment, which considers 3-D solid geometry, there'll be the improvement of the driver's safety for designing roads. In addition, after collecting and analyzing the data for the road sections which have various geometrical structures by expanding this experiment it is considered that there should be developed the models which considers 3-D solid geometry.

• The Journal of Art Theory & Practice
• /
• no.4
• /
• pp.77-104
• /
• 2006

The propaganda paintings in oil colors or in forms of posters made from 1949 to 1966 have gone through some changes experiencing the influence of the Soviet Union Art and discussion of nationalization, while putting political messages of the time in the picture planes. The propaganda paintings which have been through this process became an effective means of encouraging the illiterate people in political ideologies, production, and learning. Alike other propaganda paintings in different mediums, the ones which were painted in oil colors and in the form of posters have been produced fundamentally based on Mao Zedong's intensification of the literary art on the talks on literature at Yenan. Yet, the oil paintings and posters were greatly influenced by the socialist realism and propaganda paintings of the Soviet Union, compared to other propaganda paintings in different mediums. Accordingly, they were preponderantly dealt in the discussions of nationalization of the late '50s. To devide in periods, the establishment of People's Republic of China in 1949 as a diverging point, the propaganda paintings made before and after 1949 have differences in subject matters and styles. In the former period, propaganda paintings focused on the political lines of the Communists and enlightenment of the people, but in the latter period, the period of Cultural Revolution, the most important theme was worshiping Mao Zedong. This was caused by reflection of the social atmosphere, and it is shown that the propaganda painters had reacted sensitively to the alteration of politics and the society. On the side of formalities, the oil paintings and posters made before the Cultural Revolution were under a state of unfolding several discussions including nationalization while accepting the Soviet Union styles and contents, and the paintings made afterwards show more of unique characteristics of China. In 1956, the discussion about nationalization which had effected the whole world of art, had strongly influenced the propaganda paintings in oil colors more than anything. There were two major changes in the process of making propaganda paintings in oil colors. One was to portray lives of the Chinese people truthfully, and the other was to absorb the Chinese traditional styles of expression. After this period, the oil painters usually kept these rules in creating their works, and as a result, the subject matters, characters, and backgrounds have been greatly Sinicized. For techniques came the flat colored surface of the new year prints and the traditional Chinese technique of outlining were used for expressing human figures. While the propaganda paintings in oil colors achieved high quality and depth, the posters had a very direct representation of subject matters and the techniques were unskilled compared to the oil paintings. However, after the establishment of People's Republic of China, the posters were used more than any other mediums for propagation of national policy and participation of the political movements, because it was highly effective in delivering the policies and political lines clearly to the Chinese people who were mostly illiterate. The poster painters borrowed techniques and styles from the Soviet Union through books and exhibitions on Soviet Union posters, and this relation of influences constantly appears in the posters made at the time. In this way, like the oil paintings, the posters which have been made with a direct influence of the Soviet Union had developed a new, sinicised process during the course of nationalization. The propaganda paintings in oil colors or in forms of posters, which had undergone the discussion of nationalization, had put roots deep down in the lives of the Chinese people, and this had become another foundation for the amplification of influences of political propaganda paintings in the following period of Cultural Revolution.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.2
• /
• pp.164-172
• /
• 2010

This study reviews the influence of culture in interpersonal servicescapes by examining the restaurant retail setting. Two cultures (Canada and France) are surveyed in order to better understand their retail expectations towards interpersonal servicescapes. Using Hofstede's (1991) cultural dimensions to explain some of the differences between Canadian and French restaurant patrons, this study demonstrates a potentially interesting research avenue in the field of cross-cultural interpersonal services marketing. It demonstrates that cultural dimensions do not operate independently but interdependently. Understanding this can help retailers better explain complex service interactions between countries that may appear similar in terms of various socio-demographic features. In this exploratory research, a measure via exploratory factor analysis was developed, one that encompasses both the physical and service aspects common to interpersonal servicescape by using personality traits. This measure was tested in order to better understand the service expectations between two cultures, Canada and France. Five dimensional structures were uncovered in both cultures but with different traits and groupings. The differences between the traits uncovered and the overall Canadian and French personality structures find some explanation using Hofstede's (1991) cultural dimensions. The results of this survey point to a possible explanation as to why when services are transferred between cultures, the perceptions of them can be different and sometimes even lead to service failure. There are clearly some cultural differences between the Canadian and French consumers and their overall expectations regarding their consumption experience. Reviewing the first factor of the French and Canadian personality structures shows that the individualist/collectivist differences are apparent between the Canadian and the French cultures. The second dimension also has quite a few traits in common, five, all of which have the personal treatment aspect of the restaurant experience that a service provider would be responsible for: polite, respectful, and dedicated. Notable is that the French dimension does not include the authenticity or the hospitable aspect of the experience but includes even more features that are inherent to the personal interaction, such as charming and courteous. The third dimension of the Canadian and French structures reflects completely different expectations. Whereas the French dimension centers around energy and enthusiasm, the Canadian version is more laid-back and relaxed. There is extroversion in the French dimension to introversion in the Canadian dimension. This could be explained by differences on the Uncertainty Avoidance dimension as outlined by Hofstede (1991). The fourth dimension seems to confirm previously outlined cultural differences. Whereas Canadians, being a bit lower on uncertainty avoidance and power distance, prefer an intimate and private experience, the French continue to expect extraversion and inclusive features to their experience. The fifth dimension is in the French personality structure a clear expression of the high power distance society, where the roles of the players in the restaurant experience are clearly defined and the rules of engagement preserved. This study demonstrates that different cultures clearly do relate to different expectations regarding interpersonal services. This is apparent in the dimensions that come up in both the French and the Canadian personality structures, not only in terms of how different they are but also in with which cultural dimensions these can be explained. For interpersonal servicescapes, the use of personality traits is interesting as it allows for both physical and service features to be accounted for. Furthermore, the social component inherent to interpersonal servicescapes surfaces in most of the dimensions of the service personality structures. The quality of social exchanges is extremely important, and this even more so in cross-cultural situations, where the expec tations regarding the service experience may vary. As demonstrated by this research and using Hofstede's (1991) paradigm, not all societies will have the same expectations pertaining to the interpersonal services. Furthermore, the traditions surrounding the type of service can also have an impact on the service evaluations and differ between countries and cultures. However, using personality traits may also allow for retailers to see which service traits are common to two or more cultures where they seek to be present, and focus on these in the offering. The findings demonstrate the importance of the individualist and collectivist dimension for interpersonal servicescapes. This difference between the French and the Canadian personality structure is apparent in the most dominant dimension as well as within others. The findings are a step in explaining how retailers can transfer and then measure interpersonal services across cultures.

• Management & Information Systems Review
• /
• v.36 no.4
• /
• pp.1-19
• /
• 2017

These days, the concept of creating shared value is drawn keen attentions to. This interest comes out of the expectation that Creating Shared Value(CSV) can offer an answer to some social issues by creating societal and economic values on the top of the achievements that existing Corporate Social Responsibility(CSR) has made. However, it is difficult to make a clear distinction between the achievements that the activities of CSR and CSV have made. In this regard, developing a methodology to make an actual proof analysis on the accomplishments of CSV and to verify customer's awareness of and attitude towards the CSV is necessarily required. A company needs to gain a competitive advantage in the marketplace as well as resolve a social issue by innovating value chain. The research has verified the cause and effect relationship between the CSV from the point of view of value chain and the purchase intention aroused by its economic, societal and cultural values through the company image and credibility with actual proof analysis and come up with following results. First, a societal and cultural value resulted in giving positive impact on a company's image, which implies that CSV activities can be the thin end of the wedge through which customers have a good image of the company involved in CSV. Second, a societal value makes a positive influence on the credibility of a company. In this regard, CSV should be recognized not just as a thing that generates a cost, but a way to win-win as well as future development. Third and last, the research results show that both company image and credibility influence on purchase intention. Considering that CSV generates a positive evaluation on a company that will ultimately cause continuous profit-making, the company's ultimate goal of activities, it should be approached from the perspective of making a mid-and-long term strategy.

• Korean Journal of Occupational Health Nursing
• /
• v.11 no.1
• /
• pp.13-30
• /
• 2002

Industrial shift workers feels suffer mental stresses which are caused by unfamiliar day sleep, noisy environment, sleeping disorder by bright light, unusual contacts with family, difficulty in meeting with friends or having formal social meetings and other social limitations such as the use of transportation. Such stresses influence health of the workers negatively. Thus the health promotion policy for shift workers should be made considering the workers' ways of living and shift work specially. This study attempted to provide basic information for development of the health promotion program for industrial shift workers by examining predictive factors influencing health promotion behaviors of those workers. In designing the study, three power generation plants located in Pusan and south Kyungsang province were randomly selected and therefrom 280 workers at central control, boiler and turbine rooms and environmental chemistry parts whose processes require shift works were sampled as subjects of the study. Data were collected two times from September 17 to October 8, 1999 using questionnaires with helps of safety and health managers of the plants. The questionnaires were distributed through mails or direct visits. Means for the study included the measurement tool of health promotion behavior provided by Park(1995), the tool of self-efficacy measurement by Suh(1995), the tool of internal locus of control measurement by Oh(1987), the measurement tool of perceived health state by Park(1995) and the tool of social support measurement by Paek(1995). The collected data were analyzed using SPSS program. Controlling factors of the subjects were evaluated in terms of frequency and percentage ratio Perceived factors and health promotion behaviors of the subjects were done so in terms of mean and standard deviation, and average mark and standard deviation, respectively. Relations between controlling and perceived factors were analyzed using t-test and ANOVA and those between perceived factors and the performance of health promotion behaviors, using Pearson's Correlation Coefficient. The performance of health promotion behaviors was tested using t-test, ANOVA and post multi-comparison (Scheffe test). Predictive factors of health promotion behavior were examined through the Stepwise Multiple Regression Analysis. Results of the study are summarized as follows. 1. The performance of health promotion behaviors by the subjects was evaluated as having the value of mean, $161.27{\pm}26.73$ points(min.:60, max.:240) and average mark, $2.68{\pm}0.44$ points(min.:1, max.:4). When the performance was analyzed according to related aspects, it showed the highest level in harmonious relation with average mark, $3.15{\pm}.56$ points, followed by hygienic life($3.03{\pm}.55$), self-realization ($2.84{\pm}.55$), emotional support($2.73{\pm}.61$), regular meals($2.71{\pm}.76$), self-control($2.62{\pm}.63$), health diet($2.62{\pm}.56$), rest and sleep($2.60{\pm}.59$), exercise and activity($2.53{\pm}.57$), diet control($2.52{\pm}.56$) and special health management($2.06{\pm}.65$). 2. In relations between perceived factors of the subjects(self-efficacy, internal locus of control, perceived health state) and the performance of health promotion behaviors, the performance was found having significantly pure relations with self-efficacy (r=.524, P=.000), internal locus of control (r=.225, P=.000) and perceived health state(r=.244, P=.000). The higher each evaluated point of the three factors was, the higher the performance was in level. 3. When relations between the controlling factors(demography-based social, health-related, job-related and human relations characteristics) and the performance of health promotion behaviors were analyzed, the performance showed significant differences according to marital status (t=2.09, P= .03), religion(F=3.93, P= .00) and participation in religious activities (F=8.10, P= .00) out of demography-based characteristics, medical examination results (F=7.20, P= .00) and methods of the collection of health knowledge and information(F=3.41, P= .01) and methods of desired health education(F=3.41, P= .01) out of health-related characteristics, detrimental factors perception(F=4.49, P= .01) and job satisfaction(F=8.41, P= .00) out of job-related characteristics and social support(F=14.69, P= .00) out of human relations characteristics. 4. The factor which is a variable predicting best the performance of health promotion behaviors by the subjects was the self-efficacy accounting for 27.4% of the prediction, followed by participation in religious activities, social support, job satisfaction, received health state and internal locus of control in order all of which totally account for 41.0%. In conclusion, the predictive factor which most influence the performance of health promotion behaviors by shift workers was self-efficacy. To promote the sense, therefore, it is necessary to develop the nursing intervention program considering predictive factors as variables identified in this study. Further industrial nurses should play their roles actively to help shift workers increase their capability of self-management of health.

• Journal of Bio-Environment Control
• /
• v.24 no.1
• /
• pp.13-20
• /
• 2015

This study was conducted to evaluate influence of short-term application of abscisic acid (ABA) in nutrient solution on growth and drought tolerance of tomato seedlings. The treatments included four ABA concentrations (0.5, 1, 2, $3mg{\cdot}L^{-1}$) and control (non-treatment) were applied to the nutrient solution in a hydroponic system. On the $5^{th}$ and $10^{th}$ day after growing in the nutrient solution containing ABA, seedlings were transferred to -5 bars of PEG-8000 in a growth chamber to induce water stress. Except for stem diameter and fresh and dry weight of root, there were no statistical differences in other growth parameters among control, 0.5 and $1mg{\cdot}L^{-1}$ of ABA treatments. Seedlings growths were strongly inhibited in nutrient solution containing 2 and $3mg{\cdot}L^{-1}$ of ABA. The root growth such as fresh and dry weigh of root, total root surface area, and average root diameter was slightly enhanced in $1mg{\cdot}L^{-1}$ of ABA treatment. The elevation of ABA concentrations in nutrient solution resulted in the decrease in transpiration rate and increase in stomatal diffusive resistance and leaf temperature of tomato seedlings. The initiations of seedling wilting after treating in -5 bars of PEG were delayed from 10 hrs in control to 30 hrs in ABA applied treatments. Additionally, the high percentages of recovered seedlings were observed in 0.5 and $1mg{\cdot}L^{-1}$ of ABA treatments after re-irrigation. Therefore, short-term application of $1mg{\cdot}L^{-1}$ of ABA in the nutrient solution stimulated the root growth and drought tolerance of tomato seedlings by delaying the start time of wilting point and enhancing the recovery after re-irrigation.

• Journal of fish pathology
• /
• v.11 no.2
• /
• pp.113-117
• /
• 1998

The influence of temperature on the rate of egg production and embryonic development of Microcotyle sebastis was investigated to determine the precise time of a second treatment. The survival time of the adults of M. sebastis was inversely proportional to temperature. The number of laid eggs per each replicate during the first 24 h was $39.3{\pm}4.0$ at $10^{\circ}C$, $62.7{\pm}14.2$ at $15^{\circ}C$, $101.0{\pm}5.6$ at $20^{\circ}C$ and $89.0{\pm}11.0$ at $25^{\circ}C$. The time required for egg hatching of M. sebastis was $31.30{\pm}4.88$, $17.52{\pm}3.24$, $11.59{\pm}3.02$ and $10.76{\pm}3.10$ days at 10, 15, 20 and $25^{\circ}C$, respectively. The regression models of the time required for the beginning and 50% point of hatching according to the different temperatures were as follows; Beginning of hatch: D=58.2000-$4.2067{\times}Temp+0.0867{\times}(Temp)^2$ ($P\leq0.01$), 50% of hatch: D=91.3833-$7.5767{\times}Temp+0.1767{\times}(Temp)^2$ ($P\leq0.01$).

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.5
• /
• pp.77-98
• /
• 2020

Recently, the government provided about 35 trillion won to start-ups through a large amount of start-up support funds from the Korea Credit Guarantee Fund and the Korea Development Bank, and more than 100 trillion won to start-ups over the past three years.(2015-2018) The Ministry of SMEs and Startups announced that a total of 1.4517 trillion won will be supported by 16 ministries (90 projects) after surveying start-up support projects by ministries in 2020 to create a start-up country. Indeed, among the budgets supported by the Ministry of SMEs and Startups, startups accounted for 85%, while scale-ups (growth and maturity) were only 15%. However, the survival rate of Korean start-ups was far lower than that of developed countries. The survival rate for the three years after the start-up was 39.1 percent, with only about 4 out of 10 surviving, with 27.5 percent surviving for five years, and only 3 out of 10 surviving. On the other hand, overseas start-ups have a survival rate of twice as high as that of Korea for five years. Accordingly, this study aims to empirically analyze and examine the need for research on nascent entrepreneurs, which have recently been actively supported by the government, as well as the impact of start-up motivation and start-up preparation on the intention to continue business. The survey was conducted from April 1 to May 15, 2020 for nascent entrepreneurs nationwide, and 222 of the total 245 copies were analyzed, and the questionnaire was measured using the Likert 5-point scale. As a result of the analysis, first, all factors constituting start-up motivation were adopted by significantly affecting start-up satisfaction. In addition, among the sub-factors of nascent entrepreneurs' preparation, item preparation was adopted as a significant influence on start-up satisfaction. Second, the nascent entrepreneurs' satisfaction level was adopted by having a significant impact on the business continuity. Third, some of the motivations for self-realization of the motivation for start-ups were adopted by having a significant impact on the business continuity. In addition, the preparation of items for the start-up preparation of nascent entrepreneurs was partially adopted as they had a significant impact on the business continuity. Fourth, it was adopted by the mediation effect of start-up satisfaction between the motivation of the nascent entrepreneurs' preparation and the business continuity. In addition, it was adopted by the medium effect of start-up satisfaction between the nascent entrepreneurs' preparation and the business continuity. Based on the results of these studies, it is intended to draw practical implications, and to provide useful policy implications to increase nascent entrepreneurs' satisfaction and continue to carry out their start-ups.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.E
• /
• pp.332-342
• /
• 1994

Hierarchical cluster and factor analyses were used to identify various influences on free tropospheric air samples at Mauna Loa Observatory in Hawaii during MLOPEX. The cluster analysis separated thirteen chemical and meteorological variables into three characteristic groups (1)clean air, (2)anthropogenically influenced air, (3)marine and volcanic influenced air. The cluster analysis results compared well with those of factor analysis. Six independent components were identified in factor analysis. We have related these components to (1)volcano influenced air, (2)stratosphere-like air, (3)boundary-layer air with recent anthropogenic influence, (4)photochemical haze, (5)marine boundary- layer air, and (6)modified marine tropospheric air. Excluding local influence, we could calculate the nighttime free tropospheric values for $O_3$(41$\pm$10 ppbv), HN $O_3$(94$\pm$45 pptv), N $O_3$$^{[-10]}$ (16$\pm$10 ppbv), S $O_4$$^{[-10]}$ (60$\pm$0 pptv), N $H_4$$^{＋}$(71$\pm$6 pptv), N $a^{＋}$(5$\pm$1 pptv), PAN(13$\pm$9 pptv), MeN $O_3$(3.5$\pm$1.5 pptv), 2-butyl N $O_3$(0.6$\pm$0.1 pptv), $H_2O$$_2$(1015$\pm$44 pptv), $C_2$C $l_4$(3.3$\pm$0.1 pptv), condensation nuclei(249$\pm$13c $m^{-3}$), and dew point(-8.5$\pm$5.3$^{\circ}C$) during this experiment..

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering. Inc., Troy, USA) and ANSYS (Swanson Analysis Systems. Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Viva dent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition. Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.