• Water for future
• /
• v.25 no.1
• /
• pp.75-82
• /
• 1992

This paper presents a methodology of developing reservoir operating rules which can consider the reliability levels incorporated with the discharge policy. The operating rules were derived based on the regression and risk analysis of the optimally operated results by using the long term historical and generated reservoir inflows. The methodology was applied to the operation of the Chungju reservoir system which is consisted of two reservoirs and powerplants, and monthly operation rules were developed. Simulations were performed by using the developed operating rules can not only significantly improve the output from the existing system but also improve the reliability incorporated with the output.

• Wind and Structures
• /
• v.31 no.3
• /
• pp.217-227
• /
• 2020

Based on translation models, both Gaussian and non-Gaussian wind fields are generated using spectral representation method for investigating the influence of non-Gaussian characteristics and directivity effect of wind load on fatigue damage of wind turbine. Using the blade aerodynamic model and multi-body dynamics, dynamic responses are calculated. Using linear damage accumulation theory and linear crack propagation theory, crack initiation life and crack propagation life are discussed with consideration of the joint probability density distribution of the wind direction and mean wind speed in detail. The result shows that non-Gaussian characteristics of wind load have less influence on fatigue life of wind turbine in the area with smaller annual mean wind speeds. Whereas, the influence becomes significant with the increase of the annual mean wind speed. When the annual mean wind speeds are 7 m/s and 9 m/s at hub height of 90 m, the crack initiation lives under softening non-Gaussian wind decrease by 10% compared with Gaussian wind fields or at higher hub height. The study indicates that the consideration of the influence of softening non-Gaussian characteristics of wind inflows can significantly decrease the fatigue life, and, if neglected, it can result in non-conservative fatigue life estimates for the areas with higher annual mean wind speeds.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.3
• /
• pp.53-62
• /
• 2009

This study was carried out to select optimal probability distribution based on design accumulated monthly mean inflow from the viewpoint of drought by Gamma (GAM), Generalized extreme value (GEV), Generalized logistic (GLO), Generalized normal (GNO), Generalized pareto (GPA), Gumbel (GUM), Normal (NOR), Pearson type 3 (PT3), Wakeby (WAK) and Kappa (KAP) distributions for the observed accumulative monthly mean inflow of Chungjudam. L-moment ratio was calculated using observed accumulative monthly mean inflow. Parameters of 10 probability distributions were estimated by the method of L-moments with the observed accumulated monthly mean inflow. Design accumulated monthly mean inflows obtained by the method of L-moments using different methods for plotting positions formulas in the 10 probability distributions were compared by relative mean error (RME) and relative absolute error (RAE) respectively. It has shown that the design accumulative monthly mean inflow derived by the method of L-moments using Weibull plotting position formula in WAK and KAP distributions were much closer to those of the observed accumulative monthly mean inflow in comparison with those obtained by the method of L-moment with the different formulas for plotting positions in other distributions from the viewpoint of RME and RAE.

• Water for future
• /
• v.23 no.4
• /
• pp.499-507
• /
• 1990

Real-time reservoir operation models during flood period require optimization of hourly releases from the input data through on-line system. And predicted values. An algorithm of the simulation model to resolve the problem has already been reported with formulation of objectives to minimize the flood damage in downstream reaches and to conserve water at the end of operation for the later use. This paper presents an application of the model to a single reservoir system at the Daecheong Dam during flood and the results are reviewed. This paper also reviews measured inflows and releases in the past. The model is applied to the flood hydrographs of several return periods assuming different reservoir levels at the beginning of the operation. Also it demonstrates the simulation of test run with inflow forecasts obtained by rainfall-runoff model and compares the results. As a result, the model can use efficiently the flood control capacity with consideration of risk factor for the uncertainties associated with inflow forecasts.

• The Journal of Asian Finance, Economics and Business
• /
• v.5 no.1
• /
• pp.5-9
• /
• 2018

Many developing countries have attempted to depreciate their currencies in order to make their products cheaper, stimulate exports, shift aggregate demand to the right, and increase aggregate output. However, currency depreciation tends to increase import prices, raise domestic inflation, reduce capital inflows, and shift aggregate supply to the left. The net impact is unclear. The paper incorporates the monetary policy function in the model, which is determined by the inflation gap, the output gap, the real effective exchange rate, and the world real interest rate. Applying an extended IS-MP-AS model (Romer, 2000), the paper finds that real depreciation raised real GDP during 1997.Q1-2005.Q3 whereas real appreciation increased real GDP during 2005.Q4-2017.Q2. In addition, a higher government debt-to-GDP ratio, a lower U.S. real federal funds rate, a higher real stock price, a lower real oil price or a lower expected inflation rate would help increase real GDP. Hence, real depreciation or real appreciation may increase or reduce aggregate output, depending upon the level of economic development. Although expansionary fiscal policy is effective in stimulating the economy, caution needs to be exercised as there may be a debt threshold beyond which a further increase in the debt-to-GDO ratio would hurt economic growth.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.10
• /
• pp.87-94
• /
• 2020

This study aims to evaluate the effectiveness of sterilization in Vietnam. We estimate a simultaneous equation by using Two-Stage least squares (2SLS) regression analysis. The time-series data was collected for the first quarter of 2004 to the fourth quarter of 2018. In particular, the effectiveness of sterilization is considered in terms of dollarized economy, since making the transition from a centrally planned to a market economy system, the Vietnamese economy has remained in a state of dollarization. In addition, we also assess whether the global financial crisis had an impact on the sterilization effectiveness of the State Bank of Vietnam (SBV). On the basis of the estimated sterilization and offset coefficients, our results suggest that the State Bank of Vietnam (SBV) has not been able to fully neutralize the impact on the domestic money supply when intervening in the foreign exchange market, and the capital inflows respond strongly to changes in domestic monetary conditions. The results also show that the global financial crisis has changed the effectiveness of these sterilization policies. An analysis of this study's empirical findings provides the opportunity to derive some recommendations that may assist in increasing the effectiveness of the State Bank of Vietnam's sterilization policies in the process of accumulating international reserves.

• Wind and Structures
• /
• v.17 no.1
• /
• pp.1-19
• /
• 2013

A multiscale finite element method is applied to the Spalart-Allmaras turbulence model based detached-eddy simulation (DES). The multiscale arises from a decomposition of the scalar field into coarse (resolved) and fine (unresolved) scales. It corrects the lack of stability of the standard Galerkin formulation by modeling the scales that cannot be resolved by a given spatial discretization. The stabilization terms appear naturally and the resulting formulation provides effective stabilization in turbulent computations, where reaction-dominated effects strongly influence near-wall predictions. The multiscale DES is applied in the context of high-Reynolds flow over the Commonwealth Advisory Aeronautical Council (CAARC) standard tall building model, for both uniform and turbulent inflows. Time-averaged pressure coefficients on the exterior walls are compared with experiments and it is demonstrated that DES is able to resolve the turbulent features of the flow and accurately predict the surface pressure distributions under atmospheric boundary layer flows.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.117-124
• /
• 2013

Recently, the cell adhesion phenomenon that occurs in or between cells and other substances has become an important field of research in biology and biomedical engineering. Among the research, the foundational studies primarily experiment using biomedical materials (e.g. Glass Beads) attached to an AFM cantilever. For cell adhesion research, the mechanism where biomedical materials can be attached to the cantilever must be developed for this purpose; however, the mechanism remains an insufficient step. In this paper, a new stage where the Glass Bead can be attached to the cantilever is designed and fabricated;, the mm range movement in the stage is controlled using the stepping motor with a minimum displacement of $1{\mu}m$. The adhesive flow is also controlled using a PZT actuator. In addition, through the air suction, the cantilever holder can be fixed to the stage. The new stage including the bond inflows mechanism is evaluated and analyzed using theory and experiments.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.3
• /
• pp.25-32
• /
• 2001

A passive control method of the interaction between a weak normal shock-wave and a turbulent boundary-layer was simulated using two-dimensional Navier-Stokes computations. The inflow Mach number just upstream of the normal shock wave was 1.33. A porous plate wall having a cavity underneath was used to control the shock-wave/turbulent boundary-layer interaction. The flows through the porous holes and inside the cavity were investigated to get a better understanding of the flow physics involved in this kind of passive control method. The present computations were validated by some recent wind tunnel tests. The results showed that downstream of the rear leg of the $\lambda$-shock wave the main stream inflows into the cavity, but upstream of the rear leg of the $\lambda$-shock wave the flow proceeds from the cavity toward to the main stream. The flow through the porous holes did not choke fur the present shock/boundary layer interaction.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.93-97
• /
• 2015

How high-mass stars form is currently unclear. Calculations suggest that the radiation pressure of a forming star can halt spherical infall, preventing further growth when it reaches $10M_{\odot}$. Two major theoretical models on the further growth of stellar mass have been proposed. One model suggests the merging of less massive stellar objects, and the other is through accretion, but with the help of a disk. Inflow motions are key evidence for how forming stars gain further mass to build up massive stars. Recent developments in technology have boosted the search for inflow motion. A number of high-mass collapse candidates were obtained with single dish observations, and mostly showed blue profiles. Infalling signatures seem to be more common in regions which have developed radiation pressure than in younger cores, which is the opposite of the theoretical prediction and is also very different from observations of low mass star formation. Interferometer studies so far confirm this tendency with more obvious blue profiles or inverse P Cygni profiles. Results seem to favor the accretion model. However, the evolution of the infall motion in massive star forming cores needs to be further explored. Direct evidence for monolithic or competitive collapse processes is still lacking. ALMA will enable us to probe more detail of the gravitional processes.