• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권9호
• /
• pp.423-429
• /
• 2001

This paper proposes adaptive impedance control algorithm using fuzzy inference when robot contacts with its environments. The characteristics of the adaptive impedance controller is to adapt with parametric uncertainty and nonlinear conditions. The control algorithm is to join impedance controller with fuzzy inference engine. The proposed control method overcomes the problem of impedance controller using gain-tuning algorithm of fuzzy inference engine. We implemented an experimental set-up consisting of environment-generated one-link robot system and DSP system for controller development. We apply the adaptive fuzzy impedance controller to one-link root system, and it shows the good performance on regulating the interactive force in case of contacting with arbitrary environment.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1272-1278
• /
• 1999

A fault is considered as a variation of physical parameters; therefore the design of fault detection and identification(FDI) can be reduced to the parameter identification of a non linear system and to the association of the set of the estimated parameters with the mode of faults. Neuro-Fuzzy Inference System which contains multiple linear models as consequent part is used to model nonlinear systems. Generally, the linear parameters in neuro-fuzzy inference system can be effectively utilized to fault diagnosis. In this paper, we proposes an FDI system for nonlinear systems using neuro-fuzzy inference system. The proposed diagnostic system consists of two neuro-fuzzy inference systems which operate in two different modes (parallel and series-parallel mode). It generates the parameter residuals associated with each modes of faults which can be further processed by additional RBF (Radial Basis Function) network to identify the faults. The proposed FDI scheme has been tested by simulation on two-tank system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.720-723
• /
• 1995

As a part of the configuration design expert system of machine tools, inference mechanisms are constructed in this paper. In addition to procedural inference, the method of multivariable inference is considered as an efficient approach to deal with the cases of highly coupled condition. We propose a generalized multivariable inference procedure. The procedure is applied to the type selection module of the configuration design expert system of machine tools in order to demonstrate the efficiency and validity.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1107-1111
• /
• 2004

As an information technology is developed, more intelligent system considering emotional factor for implementing the personality is required. In this paper, Reactive Learning Inference System considering emotional factor is proposed. Emotional Facter(E) is defined for a criterion for representing the personal preference. This system is designed to have functions of Reactive filtering by Emotional factor, Incremental learning, perception & inference and knowledge retrieval. This system is applied to the area for analysis of customer's tastes and its performance is analyzed and compared.

• 전기학회논문지
• /
• 제59권5호
• /
• pp.981-989
• /
• 2010

In this study, we introduce a new architecture of fuzzy inference system. In the fuzzy inference system, we use Fuzzy C-Means clustering algorithm to form the premise part of the rules. The membership functions standing in the premise part of fuzzy rules do not assume any explicit functional forms, but for any input the resulting activation levels of such radial basis functions directly depend upon the distance between data points by means of the Fuzzy C-Means clustering. As the consequent part of fuzzy rules of the fuzzy inference system (being the local model representing input output relation in the corresponding sub-space), four types of polynomial are considered, namely constant, linear, quadratic and modified quadratic. This offers a significant level of design flexibility as each rule could come with a different type of the local model in its consequence. Either the Least Square Estimator (LSE) or the weighted Least Square Estimator (WLSE)-based learning is exploited to estimate the coefficients of the consequent polynomial of fuzzy rules. In fuzzy modeling, complexity and interpretability (or simplicity) as well as accuracy of the obtained model are essential design criteria. The performance of the fuzzy inference system is directly affected by some parameters such as e.g., the fuzzification coefficient used in the FCM, the number of rules(clusters) and the order of polynomial in the consequent part of the rules. Accordingly we can obtain preferred model structure through an adjustment of such parameters of the fuzzy inference system. Moreover the comparative experimental study between WLSE and LSE is analyzed according to the change of the number of clusters(rules) as well as polynomial type. The superiority of the proposed model is illustrated and also demonstrated with the use of Automobile Miles per Gallon(MPG), Boston housing called Machine Learning dataset, and Mackey-glass time series dataset.

• Nuclear Engineering and Technology
• /
• 제33권5호
• /
• pp.483-497
• /
• 2001

In this work, a neuro-fuzzy inference system combined with the wavelet denoising, PCA (principal component analysis) and SPRT (sequential probability ratio test) methods is developed to detect the relevant sensor failure using other sensor signals. The wavelet denoising technique is applied to remove noise components in input signals into the neuro-fuzzy system The PCA is used to reduce the dimension of an input space without losing a significant amount of information. The PCA makes easy the selection of the input signals into the neuro-fuzzy system. Also, a lower dimensional input space usually reduces the time necessary to train a neuro-fuzzy system. The parameters of the neuro-fuzzy inference system which estimates the relevant sensor signal are optimized by a genetic algorithm and a least-squares algorithm. The residuals between the estimated signals and the measured signals are used to detect whether the sensors are failed or not. The SPRT is used in this failure detection algorithm. The proposed sensor-monitoring algorithm was verified through applications to the pressurizer water level and the hot-leg flowrate sensors in pressurized water reactors.

• 한국정보시스템학회:학술대회논문집
• /
• 한국정보시스템학회 2003년도 춘계학술대회
• /
• pp.271-285
• /
• 2003

In the conduct of this study, a web-enabled healthcare system for the management of hypertension was implemented through a hyperlink-based inference approach. The hyperlink-based inference platform implemented using the hypertext capacity of HTML which ensured accessibility, multimedia facilities, fast response, stability, ease of use and upgrade, and platform independency of expert systems. Many HTML documents, which are hyperlinked to each other based on expert rules, were uploaded beforehand to perform the hyperlink-based inference. The HTML documents were uploaded and maintained automatically by our proprietary tool called the Web-Based inference System (WeBIS) that supports a graphical user interface (GUI) for the input and edit of decision graphs. Nevertheless, the editing task of the decision graph using the GUI tool is a time consuming and tedious chore when the knowledge engineer must perform it manually. Accordingly, this research implemented an automatic generator of the decision graph for the management of hypertension. As a result, this research suggests a methodology for the development of Web-enabled healthcare systems using the hyperlink-based inference approach and, as an example, implements a Web-enabled healthcare system for hypertension, a platform which peformed especially well in the areas of speed and stability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.341-344
• /
• 1991

Rules in expert system have meaning of assigning never-happen-minterms. Overall logical relations of variables can be achived by making all prime implicants of never-happen-minterms. From prime implicants, two tables, which are necessary in the process of inference, are constructed. There are two inferencing modes. One excutes inference only one variable which the user is interested in, and the other excutes inference all variables simultaneously. Outputs of inference have not only 'true' or 'false' but also 'unknown' which is different from conventional expert system. In this paper, an efficient approach is presented, which can check logical inconsistency in knowledge base and contradiction between input facts and rules. The methods in the paper may be available in the field of diagnosis and alarm processing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.563-565
• /
• 1998

In this paper, we are proposed optimization method of fuzzy model in order to complex and nonlinear system. In the fuzzy modeling, a premise identification is very important to describe the charateristics of a given unknown system. Then, the proposed fuzzy model implements system structure and parameter identification, using the fuzzy inference method and genetic algorithms. Inference method for fuzzy model presented in our paper include the simplified inference and linear inference. Time series data for gas furance and sewage treatment process are used to evaluate the performance of the proposed model. Also, the performance index with weighted value is proposed to achieve a balance between the results of performance for the training and testing data.

• 한국지능시스템학회논문지
• /
• 제14권6호
• /
• pp.776-782
• /
• 2004

Generally, Max-Min CRI (Compositional Rule of Inference ) method by Zadeh and Mamdani is used in the conventional fuzzy inference. However, owing to the problems of Max-Min CRI method, the inference often results in significant error regions specifying the difference between the desired outputs and the inferred outputs. In this paper, I propose a New Max-Min CRI method which can solve some problems of the conventional Max-Min CRI method. And then this method is simulated in a D.C.series motor, which is a bench marking system in control systems, and showed that the new method performs better than the other fuzzy inference methods.