• 제어로봇시스템학회논문지
• /
• 제13권7호
• /
• pp.637-648
• /
• 2007

This paper presents a sensor fusion method based on indirect Kalman filter(IKF) for error compensation of low-cost inertial sensors and its application to the determination of attitude and position of small flying robots. First, the analysis of the measurement error characteristics to zero input is performed, focusing on the bias due to the temperature variation, to derive a simple nonlinear bias model of low-cost inertial sensors. Moreover, from the experimental results that the coefficients of this bias model possess non-deterministic (stochastic) uncertainties, the bias of low-cost inertial sensors is characterized as consisting of both deterministic and stochastic bias terms. Then, IKF is derived to improve long term stability dominated by the stochastic bias error, fusing low-cost inertial sensor measurements compensated by the deterministic bias model with non-inertial sensor measurement. In addition, in case of using intermittent non-inertial sensor measurements due to the unreliable data link, the upper and lower bounds of the state estimation error covariance matrix of discrete-time IKF are analyzed by solving stochastic algebraic Riccati equation and it is shown that they are dependant on the throughput of the data link and sampling period. To evaluate the performance of proposed method, experimental results of IKF for the attitude determination of a small flying robot are presented in comparison with that of extended Kaman filter which compensates only deterministic bias error model.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1037-1043
• /
• 2004

In this paper, a new fault detection and isolation algorithm fur inertial sensor system is proposed. To identify the inertial sensor fault, single antenna GPS receiver is used as an effective redundancy source. To use GPS receiver as redundancy for the inertial sensors, the algorithm to estimate the attitude and acceleration using single antenna GPS receiver is adopted. By using Doppler shift of carrier phase signal and kinetic characteristics of aircraft, attitude information of aircraft can be obtained at the coordinated flight condition. Based on this idea, fault diagnosis algorithm for inertial sensors using single antenna GPS based attitude is proposed. For more effective FDI, decision variables considering the aircraft maneuver are proposed. The effectiveness of the proposed algorithm is verified through the numerical simulations.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2048-2057
• /
• 2010

Is this paper, a pedestrian inertial navigation system with vision is proposed. The navigation system using inertial sensors has problems that it is difficult to determine the initial position and the position error increases over time. To solve these problems, a vision system in addition to an inertial navigation system is used, where a camera is attached to a pedestrian. Landmarks are installed to known positions so that the position and orientation of a camera can be computed once a camera views the landmark. Using this position information, estimation errors in the inertial navigation system is compensated.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.101-108
• /
• 1998

This paper concerns the navigation algorithm of motion reference unit (MRU) for autonomous underwater vehicle (AUV) We apply the strapdown navigation system using middle level inertial sensors. But, because the MRU consists of inertial sensors, the values of AUV motion calculated by navigation computer are increased by drift property of inertial sensors. Therefore, we propose the attitude algorithm using switching method according to the motion of AUV From this algorithm, the drift terms are eliminated effectively for roll and pitch. But, another device is required for yaw angle.

• Current Research on Agriculture and Life Sciences
• /
• 제32권2호
• /
• pp.79-84
• /
• 2014

본 논문에서는 저가, 저전력 및 소형의 IMU를 구성하기 위한 MEMS 관성 센서를 이용하여 자세 정보를 제공받는 ARHES에 위의 센서를 사용하기 위해 자이로 센서 및 가속도센서의 데이터 출력 특성을 검증하여 오차 및 정확도를 분석하였다. 센서 실험을 위하여 진자 실험 장치를 제작하였고, 진자 운동에 대한 센서 데이터를 수집하였다. 이론적인 수식을 유추하여 센서 데이터의 정확성 분석을 위한 기준 값으로 설정하였다. 센서값과 이론값을 비교하면 각속도에서 4.32~5.72%, 가속도에서 x-, z-축 방향에 대하여 각각 3.53~6.74% 및 3.91~4.16%의 오차율을 나타냈다. 진자실험 장치를 이용한 센서 검증에서 무인헬리콥터에 사용될 센서로서 적합한 것으로 평가되었으며 이는 짐벌장치 등을 이용한 자세추정 알고리즘을 구성하는데 기초가 되었다. 또한, 더욱 정밀한 실험을 위해서는 온도 등 주변 환경 요인에 대한 보정이 요구된다.

• 제어로봇시스템학회논문지
• /
• 제10권1호
• /
• pp.1-9
• /
• 2004

Inertial navigation system with hardware redundancy must use FDI(Fault Detection and Isolation) method to remove the influence of faulty sensors. Until now, several FDI methods such as PSA(Parity Space Approach), GLT(Generalized Likelihood ratio Test) and OPT(Optimal Parity vector Test) method are generally used. However, because these FDI methods only consider the situation that the system has one faulty sensor, these methods cannot be directly adapted for the system with two faulty sensors. To solve this problem, in this paper, PSA method is analyzed and based on this result, new FDI method called EPSA is proposed to consider a detection and an isolation of two faulty sensors in inertial navigation system.

• 한국정밀공학회지
• /
• 제32권4호
• /
• pp.377-386
• /
• 2015

Joint force/torque estimation by inverse dynamics is a traditional tool in biomechanical studies. Conventionally for this, kinematic data of human body is obtained by motion capture cameras, of which the bulkiness and occlusion problem make it hard to capture a broad range of movement. As an alternative, inertial motion sensing using cheap and small inertial sensors has been studied recently. In this research, the performance of inertial motion sensing especially to calculate inverse dynamics is studied. Kinematic data from inertial motion sensors is used to calculate ground reaction force (GRF), which is compared to the force plate readings (ground truth) and additionally to the estimation result from optical method. The GRF estimation result showed high correlation and low normalized RMSE(R=0.93, normalized RMSE<0.02 of body weight), which performed even better than conventional optical method. This result guarantees enough accuracy of inertial motion sensing to be used in inverse dynamics analysis.

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.613-620
• /
• 2013

A new remote control algorithm for a mobile robot is proposed, where a remote controller consists of a camera and inertial sensors. Initially the relative position and orientation of a robot is estimated by capturing four circle landmarks on the plate of the robot. When the remote controller moves to point to the destination, the camera pointing trajectory is estimated using an inertial navigation algorithm. The destination is transmitted wirelessly to the robot and then the robot is controlled to move to the destination. A quick movement of the remote controller is possible since the destination is estimated using inertial sensors. Also unlike the vision only control, the robot can be out of camera's range of view.

• 제어로봇시스템학회논문지
• /
• 제19권2호
• /
• pp.102-106
• /
• 2013

A cooperative navigation method for cooperative flight of UAVs is proposed. The commonly used navigation method for UAVs is based on GNSS measurements. However, when it is not available by jamming or other causes, an alternative method is needed. In this paper, it is shown that UAVs equipped with inertial sensors, passive sensor and wireless communication link can perform accurate navigation through sharing information with each other. Firstly, the appropriate roles for sensors and wireless communication link are assigned. Secondly, a filter to perform navigation cooperative is constructed. Finally, the boundedness of estimation error of the filter under small initial estimation error is analyzed. The simulation results show that the proposed method can reduce navigation errors effectively.

• 대한의용생체공학회:의공학회지
• /
• 제32권2호
• /
• pp.118-126
• /
• 2011

This study proposes a human body orientation tracking system by inertial and earth magnetic sensors. These sensors were fused by indirect Kalman filter. The proposed tracking system was configured and the filter was implemented. The tracking performance was evaluated with static and dynamic tests. In static test, the sensor was fixed on the floor while its static characteristics was analyzed. In dynamic test, the sensor was held and moved manually for 30 seconds. The dynamic test included x, y, z axis rotations, and elbow flection/extension motions that mimic drinking. For these dynamic motions, the tracking angle error was under $4.1^{\circ}$ on average. The proposed tracking method is expected to be useful for various human body motion analysis.