• Culinary science and hospitality research
• /
• v.16 no.2
• /
• pp.96-109
• /
• 2010

As a life cycle changed and people who eat out rapidly increased, the imbalance of nutrition through eating out has been suggested as a risk factor for chronic diseases. This has cast light on health-oriented menu for restaurant customers, raising it as a new social issue in the food service and health industry. In light of this situation, this thesis focuses on the relationship among health-oriented menu for restaurant customers, herbal foods and its influence on customer satisfaction to provide useful information on LOHAS and herbal foods. Also, it investigates their vegetable diet, including eating herbal food, and Buddhist temple foods which are in close relationship with health. The results are as follows. First, health orientation had a significant impact on LOHAS. Second, health-oriented menu proved to give significantly positive influence on customer satisfaction by introducing herbal foods. Third, LOHAS gave a significant impact on herbal foods, and by herbal foods, it gave positive influence on customer satisfaction. Finally, the hypothesis which said herbal food has a significant impact on customer satisfaction also had significant influence.

• The Journal of Information Systems
• /
• v.15 no.3
• /
• pp.1-34
• /
• 2006

The purpose of this study Is to develop empirically validated instrument for business model. The previous researches related to business model were almost taxonomies. And the focus of those researches were the classification by the degree of integration and innovation the origin, and the main source of revenue etc. In the emerging fields such as IT, e-commerce, and e-business, it tends to overlook methodological issue in its substantive relationships and also measurement. Business model is taken an interest in recent years. However, as the non-establishment of construct on business model has made no empirical study, this, study tries to develop an empirical validated instrument that identifies the dimensions of business model by uncovering meaningful group or categories. For this, the outlined domain of business model are defined as an organizational level that competes in the industry through the literature reviews. And the traits such as process integration, value chain reconstruction, strategic alliance with another business model, specialty in a certain wet sustainability of essential capabilities, differentiation, convertibility, customer orientation, revenue stream, newness, innovation leadership: and vision sharing are identified in those respective domains, and then the traits are classified into five dimensions such as interlinkageableness, valueness, functionalness, preemptiveness, and goalness by their characteristics. Generating items are continued on the basis of operationalization. Confirmatory factor analysis is performed in order to develop validated instrument with LISREL measurement model. Finally the instrument is developed through the previous procedure. The implication of this study is the first empirical effort to assess business model. The resulting instrument can be used with dependent variables in the future study related to business model. And the establishment of construct of business model is able to make a basis to rise an additional issue consequently. In the practical side, the instrument also can be employed as an assessment framework that can assess whether the expected value success or not. The instrument with the measurement can be used on competitor's business model, In. When an investment into a i-m with a specific business model, these instrument developed can be presented as the basic framework of assessment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.447-459
• /
• 2013

Many problems need to be solved before vision systems can actually be applied in industry, such as the precision of the kinematics model of the robot control algorithm based on visual information, active compensation of the camera's focal length and orientation during the movement of the robot, and understanding the mapping of the physical 3-D space into 2-D camera coordinates. An algorithm is proposed to enable robot to move actively even if the relative positions between the camera and the robot is unknown. To solve the correction problem, this study proposes vision system model with six camera parameters. To develop the robot vision control algorithm, the N-R and EKF methods are applied to the vision system model. Finally, the position accuracy and processing time of the two algorithms developed based based on the EKF and the N-R methods are compared experimentally by making the robot perform slender bar placement task.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.10
• /
• pp.1015-1027
• /
• 2012

This study compares and analyzes cosmetics purchasing behavior according to the advertising and publicity implemented in women's monthly magazines as well as determines effective marketing strategies for the cosmetics industry. First, cosmetics advertising and publicity in women's monthly magazines can be classified into conventional advertising, advertorials, beauty news based on press releases, and beauty articles written by editors. In addition, consumer purchasing behavior has been examined in terms of use of information, purchasing intention, and purchasing experience. A study was conducted on women in their 20's to 40's in Seoul and Gyeonggi-do with 289 questionnaires used in the final analysis. Data were analyzed by common factor analysis, randomized block design, Bonferroni adjusted t-test, and multiple linear regression using SPSS 12.0/Windows. The results of the study can be summarized as follows. First, there was a difference in purchasing behavior according to types of cosmetics advertising and publicity in women's monthly magazines. Second, cosmetics shopping orientations were classified into six factors (the pursuit of impulsive purchasing and trends, well-known brands, convenience, low prices, efficacy and brand loyalty). There were significant effects of shopping orientation on cosmetics purchasing behavior according to the type of advertisement and publicity in women's monthly magazines.

• Journal of Fashion Business
• /
• v.20 no.6
• /
• pp.32-51
• /
• 2016

KakaoTalk has become a reputed mobile social network and an inseparable part of people's lives by leading the mobile industry in South Korea. However, there is a lack of studies in academia regarding perception of the consumers and assessment toward the mobile marketing and services by KakaoTalk. Based on the theoretical orientation of Elaboration Likelihood Model (ELM: Petty & Cacioppo, 1986) and electronic service quality (E-S-QUAL: Parasuraman, Zeithaml, & Malhotra, 2005), this study investigates the effects of information sources (Charles & Richard, 1988), and examines the consumer perception toward the service quality of KakaoTalk. A total of 209 responses were collected, using a self-administered survey in Seoul and Gyeonggi province, South Korea from March 2015 to June 2015. A seven-point Likert scale survey was developed to measure the information sources (i.e., argument quality, post popularity, and post attractiveness), electronic service quality (i.e., efficiency, fulfillment, privacy, and system availability), attitude (i.e., usefulness, preference, and overall attitude), and behavioral intention (i.e., like intention, share intention, and purchase intention). This study reveals a consensus that an online environment is different from the traditional retail context in terms of information source and service quality. Specifically, the results indicate that argument quality greatly impacts the attitudes of the individuals and their behavioral intention toward mobile shopping via social media channel. The most powerful factor among E-S-QUAL is "efficiency." This dimension of service quality influences the customer perception of usefulness and preference as well as share and like intention toward mobile shopping on KakaoTalk.

• Horticultural Science & Technology
• /
• v.32 no.2
• /
• pp.133-141
• /
• 2014

Due to limited supplies and expensive importing costs, it is a goal to replace overseas peat with local soil amendments in turf industry of Korea. The study was initiated to compare the performances of five domestic and imported organic soil amendments (OSAs) on establishment characteristics and to provide basic information for root zone composition on sports turf design and construction. The study was conducted in Kentucky bluegrass (Poa pratensis L., KB) under greenhouse conditions from March to June in 2008. A total of 25 treatments of OSA + sand were prepared. These amendments were Berger Peat (OMA), Eco-Peat (OMB), G1-Soil (OMC), Premier Peat (OMD), and Supersoil I (OME). Significant differences were observed in establishment vigor, seedling emergence, and top growth. Results varied depending upon the type of OSAs and their rates in rootzone mixtures. OMA reached over 70% in establishment vigor in 5 WAS (weeks after seeding). OMC produced a maximum vigor of approximately 60% in 6 WAS. The OME amendment, however, showed poor performance lower than 30% in establishing KB turf until 8 WAS. There were considerable variations of top growth, being 3.8 to 14.5 cm. Greater differences in top growth resulted from OME mixtures. Shoot growth orientation in KB is also influenced by OSAs. In general, optimum mixing rate was considered as 10 to 20% for establishment vigor and 20 to 40% for top growth. Considering overall responses to establishment vigor, seedling emergence, and shoot growth, both local OMC and overseas OMD are considered as the useful soil amendments applicable for sports turfs. Domestic OME amendment would be applied for a low maintenance turfs such as rough and utility areas due to greater shoot growth. Information on these amendments would be of practical use for sports turf design and construction. Repeated experiments and field performance test are required to evaluate these OSA effect on other major turfgrass species and also to determine local OSA as imported peat substitute.

• Industry Promotion Research
• /
• v.5 no.1
• /
• pp.107-115
• /
• 2020

This study is to find social welfare practices that married women migrant can provide to them in order to relieve the stress of cultural differences and enjoy a good family life. Results,First, action plans to overcome intercultural differences are needed. To overcome effective cross-cultural differences, interventions and goals are set for culturally diverse clients that match their racial, cultural, ethnic, gender and sexual orientation.Second, it is necessary to cultivate professional education personnel. In order to train professionals, cultural diversity should be addressed in existing social welfare courses.Third, the related laws need to be rearranged. The Multicultural Family Support Act continues to emerge as a need for supplementation, including the understanding of Korean family culture and the lack of counseling for immigrant women.As a result, married women immigrants recognize that Korean life is different from their own in many aspects of their daily lives, so they endeavor to have a lot of patience and high level of effort in the adaptation process. Therefore, there is a need for a social welfare practice that can support this.

• Journal of the Korean Home Economics Association
• /
• v.27 no.3
• /
• pp.13-28
• /
• 1989

With the purpose of identifying clothing for persons with special needs one of new directions in Clothing and Textiles, this pater comparatively analyzed current curriculum and research trends related to this field between Korea and America. Questionaire was distributed to 25 Korean colleges with Clothing and Textiles department and 4 American colleges known for special clothing study. Questions regarded the name of course, level (grade), number of credit houre, prerequisits and supporting courses, subjects of lecture and projects, way of managing lecture and projects, evaluation system, other special characteristics. Resources for analyzing research trends are Thesis and Dissertations in Clothing and Textiles, Research Journal of Clothing & Textiles/Home Economics Association, College Professors' research reports collection, of both Korea and America. Years of publications are 1972∼1986 (America), 1978∼1988 (Korea). Findings are as follows; 1. Clothing for special needs can be classified into various groups; Clothing for physically handicapped, mentally retarded, elderly, unusual-sized, pregnant/nursing mothers, institutionalized, protective clothing, uniform/career apparel. 2. Management of coursework related to special clothing has several common characteristics specially in America; Building-up coursework, problem-solving orientation, cooperative team-preject, interdisciplinary approach, client-versus-designer preference, community involvement. In Korea, a few school only has special clothing coursework and its scope of study was very limited. 3. Majority of research reports done with the subjects of special clothing had made for physically handicapped people and the elderly. Protective clothing and uniform have recently been paid much interests. 4. Researchers had mainly concerned on Design and Construction Aspects and nextly on social-psychological aspects. However, in America, selection and care aspects and marketing aspects of special clothing have been very procuctive issues recently. 5. Study on clothing for special needs has several opportunities to be stressed and improvements to be strengthened. Opportunities included active participation to the welfare of community society, strong publicity of accurate professional image, share with business and industry, interdisciplinary approach and new job market. Improvements were discussed in terms of strengthening supporting courses/prerequistes, intensifying interdisciplinary cooperation, provoking strong community involvement and securing financial support and research funds.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.323-329
• /
• 2013

This perform research of angle rated defect detection conditions and nuclear power plant piping defect detection by lock-In infrared thermography technique. Defects were processed according to change for wall-thinning length, Circumference orientation angle and wall-thinning depth. In the used equipment IR camera and two halogen lamps, whose full power capacitany is 1 kW, halogen lamps and target pipe's distance fixed 2 m. To analysis of the experimental results ensure for the temperature distribution data, by this data measure for defect length. Reliability of lock-In infrared thermography data is higher than Infrared thermography data. This through research, Shape of angle rated defect is identified industry place. It help various angles defect detection in the nuclear power plant in operation.

• Ocean Systems Engineering
• /
• v.6 no.4
• /
• pp.377-400
• /
• 2016

Dropped objects are among the top ten causes of fatalities and serious injuries in the oil and gas industry (DORIS, 2016). Objects may accidentally fall down from platforms or vessels during lifting or any other offshore operation. Proper planning of lifting operations requires the knowledge of the risk-free zone on the sea bed to protect underwater structures and equipment. To this end a three-dimensional (3D) theory of dynamic motion of dropped cylindrical object is expanded to also consider ocean currents. The expanded theory is integrated into the authors' Dropped Objects Simulator (DROBS). DROBS is utilized to simulate the trajectories of dropped cylinders falling through uniform currents originating from different directions (incoming angle at $0^{\circ}$, $90^{\circ}$, $180^{\circ}$, and $270^{\circ}$). It is found that trajectories and landing points of dropped cylinders are greatly influenced by the direction of current. The initial conditions after the cylinders have fallen into the water are treated as random variables. It is assumed that the corresponding parameters orientation angle, translational velocity, and rotational velocity follow normal distributions. The paper presents results of DROBS simulations for the case of a dropped cylinder with initial drop angle at $60^{\circ}$ through air-water columns without current. Then the Monte Carlo simulations are used for predicting the landing point distributions of dropped cylinders with varying drop angles under current. The resulting landing point distribution plots may be used to identify risk free zones for offshore lifting operations.