• Journal of Information Technology Applications and Management
• /
• 제20권1호
• /
• pp.173-195
• /
• 2013

This study is to analyze the impact of the absorptive capacity and information technology (IT) on firms' innovation. The absorptive capacity is measured by R&D investment intensity, R&D manpower concentration, and the firm's size. We try to see the interaction effects between the absorptive capacity and IT usage on firms' innovation. We also look into the differences of the impacts between manufacturing industry and service industry as well as IT industry and service industry. We found that IT and R&D intensity have stronger interaction effect on innovation in manufacturing industry than in service industry, which shows that IT plays a more important role in the accumulation of knowledge in R&D activity in manufacturing industry. Contrarily, in service industry, IT and R&D manpower concentration has significant interaction effects on innovation. This means that the role of IT in service industry is sharing knowledge and experiences among employees in service industry. The interaction effect between firm's size and IT has positive impact on innovation in manufacturing industry, while it has negative impact on innovation in service industry. Finally, we found that the interaction effect is statistically significant in non-IT industry, while it is not statistically significant in IT industry.

• 방사선산업학회지
• /
• 제10권1호
• /
• pp.37-41
• /
• 2016

The recent prevalence of PET examinations in Korea has led to an increase in the number of cyclotrons. The medical isotope $^{18}F$ produced in most cyclotron facilities currently operating in Korea is emitted into the environment during the production of [$^{18}F$]FDG, a cancerdiagnosis reagent. The amount of [$^{18}F$]FDG synthesized determines the radioactive concentration of $^{18}F$ in the exhaust. At some facilities, this amount temporarily exceeds the emission limit. In this study, we evaluated the $^{18}F$ radioactivity concentration in the exhaust from the cyclotron facility at Chosun University. The $^{18}F$ radioactivity concentration was measured using an air sampler and a HPGe semiconductor detector. The measurements showed that the radioactive concentration of $^{18}F$ in the exhaust at the cyclotron facility at Chosun University was the highest during [$^{18}F$]FDG synthesis but remained under the legal limit of $2,000Bq\;m^{-3}$.

• 한국산업보건학회지
• /
• 제6권2호
• /
• pp.265-271
• /
• 1996

This study was conducted to investigate distribution of lead particles by operation of industry, to evaluate the effect of particle size on the absorption to workers, and to recommend the Occupational Health Standard for lead. Total lead concentrations in the secondary smelting industry were higher than those in the battery and litharge manufacturing industry. Total lead concentrations in other industries except radiator manufacturing industry exceeded the standard of $50{\mu}g/m^3$. Only radiator manufacturing industry indicated lead concentrations significantly lower than those in other industries(p<0.05). Average blood lead level of workers was $85.1{\mu}g/dl$ in secondary smelting manufacturing, $51.3{\mu}g/dl$ in the battery manufacturing, and below $40{\mu}g/dl$ in the litharge and radiator manufacturing industry. Blood lead levels of workers by industry were significantly different(p<0.05). From relationship between airborne lead concentrations by size and lead in blood, confidence limits of airborne lead concentration equivalent to $40{\mu}g/dl$ of permissible limit in blood, was $147.9-489.8{\mu}g/m^3$ as total lead and $28.8-79.4{\mu}g/m^3$ as ACGIH-RPM. It is recommended that two separate occupational health standards for lead should be established by particle size. Airborne concentration of $150{\mu}g/m^3$ as fatal lead dust and $30{\mu}g/m^3$ as respirable lead dust was recommended.

• 방사선산업학회지
• /
• 제18권3호
• /
• pp.195-207
• /
• 2024

International organizations such as IAEA and EC recommend graded approach by identifying NORM industries requiring radiation protection. In Korea, single regulation rather than graded regulation for NORM industry is applied. Therefore, it consumes more manpower and costs than necessary for both regulators and workers, and is not optimized. The purpose of this study is to analyze domestic and foreign NORM industry regulatory standards and radiological characteristics for graded approach of NORM industry in Korea. Safety reports and publications such as SRS 49 and ICRP 142 published by international organizations were investigated, and domestic and foreign NORM regulatory guidelines and legislation such as Health Canada and the Act on Protective Action Guidelines Against Radiation in the Natural Environment were investigated to indicate NORM industries and regulatory standards. The radioactivity concentration of raw materials or by-products, radiation dose by industrial process of the NORM industry identified in IAEA and Korea were investigated. Nine NORM industries in Korea were identified based on the NORM industry from IAEA and KINS survey report. Foreign countries such as Canada, UK and Denmark were executing graded approach such as classification of dose level or licensing, registration, notification based on safety assessment. Radioactivity concentration of domestic and foreign NORM industries were widespread up to 200 Bq g^-1 or higher based on industrial process and work type, and numerous NORM industries that exceeded radiation dose of 1 mSv y^-1 were indicated. Therefore, it is necessary to consider handling materials and work types of identified NORM industry when establishing graded approach for NORM industry in Korea considering domestic situation. The results of this study are expected to be used as basic data for developing methodology of graded approach for NORM industry in Korea.

• 한국산학기술학회논문지
• /
• 제14권8호
• /
• pp.3656-3664
• /
• 2013

이 연구의 목적은 산학협력중점교수의 업적평가 모형을 개발하여 교수의 업적평가뿐만 아니라 질 관리에 도움을 주려는 것이다. 이를 위하여 2012년도에 교육부로부터 산학협력선도대학(LINC)에 선정된 전국 51개 대학을 포함한 57개 대학의 산학협력중점교수에 대한 규정을 수집 분석하여 산학협력중점교수의 정의 및 인정기준을 명료화하고, 산학협력중점교수의 유형과 각 유형별 역할 및 업무를 규명하였다. 그리고 산학협력중점교수의 핵심역량을 추출하여 업적평가 모형을 평가영역, 평가요소, 평가지표, 단위 등 4가지 범주로 제시하였다. 이 연구결과는 각 대학들로 하여금 산학협력중점교수의 업적평가와 질 관리 방안을 모색하는 데 일종의 준거역할을 할 것으로 기대된다.

• 한국산업보건학회지
• /
• 제5권2호
• /
• pp.160-171
• /
• 1995

The size characteristics of lead particle which is one of the important factors associated with absorption of lead were ignored in establishing lead standard. This study was conducted to investigate distribution of lead particles by operation of industry. Aerodynamic Mass Median Diameters (MMD) of airborne lead particles in the battery and litharge manufacturing industry were $14.1{\mu}m$ and $15.1{\mu}m$, respectively. There was no significant difference between those two values(p>0.05). However, the diameters in radiator manufacturing and secondary smelting industry were $1.3{\mu}m$, $4.9{\mu}m$, respectively. Those were significantly smaller than the particle sizes in other industries(p<0.05). Total lead concentrations in the secondary smelting industry were higher than those in the battery and litharge manufacturing industry. Total lead concentrations in other industries except radiator manufacturing industry exceeded the standard of $50{\mu}g/m^3$. Only radiator manufacturing industry indicated lead concentrations significantly lower than those in other industries(p<0.05). Concentrations of lead particles smaller than $1{\mu}m$ defined as respirable fraction by OSHA's CPA model assumption were $72.4{\mu}g/m^3$ in the secondary smelting industry, exceeding $50{\mu}g/m^3$. The relationship of concentrations between total lead and lead of particles smaller than $1{\mu}m$ was log Y = 0.46 logX + 0.06(n=119, $r^2=0.44$, p=0.0001). Relationship of respirable lead concentrations between OSHA and ACGIH was significantly detected in the litharge and battery manufacturing industry(p=0.0001), but was not significant in the radiator(p=0.2720) and secondary smelting manufacturing industry(p=0.2394). As MMDs of lead particles generated in industry were small, difference of respirable lead concentration between OSHA and ACGIH became smaller. There was a significant difference between concentrations respirable lead defined by two organizations such as OSHA and ACGIH in the battery and litharge manufacturing industry. Average concentration of respirable lead by ACGIH definition was 43.3 % of total lead in secondary smelting and 48.9 % in radiator manufacturing industry, and lower fractions were indicated in battery and litharge manufacturing industry. Relationships of total lead with IPM, TPM, and RPM were significant respectively(p=0.0001) and lead concentrations by particle size could be estimated using this relationship. Linear regression equation between total lead concentration(X) and ACGIH-RPM concentration(Y) was log Y = 0.76 log X - 0.40($r^2=0.89$, p=0.0001).

• 한국수산과학회지
• /
• 제36권3호
• /
• pp.198-203
• /
• 2003

Heat-induced surimi gels were prepared using various concentration of ATC as a additives and calcium agent. Regardless of various concentration of ATC, there were no difference the moisture $(80.4-81.2\%)\;and\;crude\;ash\;(1.4-1.\5%)$ contents. The pH of heat-induced surimi gels were decreased 7.16 to 7.04 depend on increasing ATC concentration. The whiteness, breaking force and gel strength of $0.09\%$surimi gel were improved significantly difference (p<0.05). Sensory evaluation on texture and whiteness were also similar to determination by color and texture meters. In mineral content of heat-induced surimi gel calcium content was increased 26 to 54 mg/100g depend on increasing ATC concentration, while phosphorus content was not change. The optimal concentration of ATC for preparation of high quality heat-induced surimi gel was $0.09\%$. The shelf-life of heat-induced surimi gel did not extend by addition of $0.09\%$ ATC.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.54-59
• /
• 2015

In this study, effects of kneading concentration on characteristics of hardwood bleached kraft pulp (HwBKP) fibers were elucidated. A laboratory two-shaft kneader was utilized for kneading. Kneading concentration was varied in the range of 15-30% (w/w) and the number of kneading treatment was adjusted between 0 and 6 passes. It was found that kneading concentration influenced fiber characteristics. At 15% of pulp concentration, fiber length slightly increased with increasing the number of kneading passes, while other morphological properties such as fiber width and curl decreased: fiber straightening occurred. In addition, the increase in WRV and the decrease in CSF were the largest at 15% kneading concentration, meanings that fibrillation mainly occurred. In contrast, at higher kneading concentration exceeding 20%, fiber deformation like curl was mainly occurred. Also, at kneading concentration of 20% and 30%, fiber length decreased with the number of kneading passes while other morphological properties such as fiber width, and WRV increased. Severe fiber entanglement was found at 30% kneading, which shall be removed during papermaking.

• 한국산업보건학회지
• /
• 제16권4호
• /
• pp.346-355
• /
• 2006

The purpose of this study was conducted to ascertain the difference between impinger and passive sampling methods in the process of sampling and analyzing on airborne formaldehyde. Formaldehyde generating workplaces included in this study comprised four types of manufacturing industry such as two workplaces of products of wood, cork, straw and plaiting materials manufacturing industries, one casting metal manufacturing industry, and one parts and accessories for motor vehicles and it′s engines manufacturing industry. Workplaces contained in this study were located in some manufacturing area of Busan industrial complex and this study was carried out during a period from January 2003 to December 2004. Analytical accuracy, precision and detection limit of two methods was compared. Exposure level of its airborne concentration was evaluated in formaldehyde generating workplaces those were classified by types of industry, working process, and time. The results were as follows ; 1. A rate of recovery was 107.1% in impinger method and 101.8% in passive method, and precision was 7.79% in impinger method and 4.40% in passive method. There was no statistical significance in analytical accuracy and precision between two methods. A limitation of detection was 0.011 ppm in passive method which was lower than that of impinger method (0.020 ppm) by 1.8 times. 2. Airborne formaldehyde concentration of impinger method was different from passive method. It′s concentration by passive method was higher by 5.1 times than that by impinger method in the parts and accessories for motor vehicles and it′s engines manufacturing industry (P<0.05). Only in molding process among several types of processes, formaldehyde concentration in passive method was higher by 5.1 times than that in impinger method (P<0.05). Furthermore, formaldehyde concentration in passive method was higher by 1.7 times than that in impinger method (P<0.05) in the first half of year 2003. 3. The geometric mean of formaldehyde concentration in impinger method was lower than that in passive method, but there was no statistical significance of formaldehyde concentration by the difference of sampling method. In conclusion, it is difficult to conclude which is better between the two sampling methods because of no statistical significance for the difference of concentration. Because of lacks of certified passive sampling and analytical method, at present situation, studies on verification of accuracy and precision, obstructive reaction against validity on its exposure assessment, and research to develop domestically manufactured passive sampler in terms of cost-effectiveness should be continuously carried out.

• 한국산업보건학회지
• /
• 제23권2호
• /
• pp.123-136
• /
• 2013

Objectives: This paper was prepapred to report airborne asbestos fiber concentrations in asbestos textile, brake-lining, commutator, and building materials manufacturing industries, and some other asbestos related industries in Korea from 1994 to 2006. Methods: Airborne asbestos data that have been sampled and analyzed in the above industries during 1994-2006 were collected. These data were reviewed to scrutinize the qualified data based on the records such as sampling and analyzed method and quality control procedures. All asbestos data were generated using the National Institute for Occupational Safety & Health (NIOSH) Method 7400. Results: Average concentration of asbestos fiber was 2.14 fibers/cc(0.02-15.6 fibers/cc) in the asbestos textile industry, 0.26 fibers/cc(0.01-1.01 fibers/cc) in the building-materials industry, 0.15 fibers/cc(0.01-0.93 fibers/cc) in the brake-lining manufacturing industry, and 0.14 fibers/cc(0.03-1.36 fibers/cc) in the commutator producing industry. For these industries, the percentage of samples of which asbestos fiber concentrations above the limit of exposure(0.1 fibers/cc) was 97.6% in the asbestos textile industry, 62.3% in the building-materials industry, 53.5% in the brake-lining manufacturing industry, and 34.3% in the commutator producing industry. Asbestos fiber concentration was below the limit of exposure in the gasket producing, petrochemistry, musical instrument producing industries, and the brake-lining exchange operations. Conclusions: Airborne asbestos fiber level in the asbestos textile, brake-lining producing, commutator and building-material producing industries was above the limit of exposure, but in the gasket producing, petrochemistry, musical instrument producing industries and the brake-lining exchange operations were below the limit of exposure.