• Journal of Korean Society of Rural Planning
• /
• v.23 no.1
• /
• pp.97-112
• /
• 2017

Stability of labor market in rural areas was analyzed in this paper with categories of industrial group, employment scale, surviving period, and founder group. The stability of each classified labor market was compared with each other to figure out the stable business class and the unstable class in rural areas. The results of rural areas were compared with those of urban areas. The stability was analyzed with average and coefficient of variation (C.V.) of annual total employees' change rates. It was revealed that labor market of 'primary industry', including agriculture, is unstable. Especially, labor market of 'mid-size' and 'primary industry' businesses founded as 'incorporated company' in rural areas is vulnerable. While labor market of 'large-size' is proved to be unstable, it is confirmed that 'small-size' or 'mid-size', and 'over-ten-year survived' businesses have positive contribution to the stable labor market in rural and urban areas. The results show that the stability of labor market is different in each category of business and in each region of rural or urban area. It is expected that the results can be utilized for the regional development policies, of labor and industry part.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.2
• /
• pp.55-65
• /
• 2020

A review of the 2nd generation of intact stability by the International Maritime Organization is performed. The main issues with the new stability criteria are reviewed. In particular, the physical background and related mathematical formulations of the pure loss of stability and parametric roll are summarized. Based on a literature review, benchmark calculation results for 17 different types of ships are discussed, and the final results are in excellent agreement with our physical expectations. Some relatively serious design problems are found in the application of the new stability criteria to sample ships built in Korea, and possible technical solutions are proposed, which have to be improved in the coming years.

• KDI Journal of Economic Policy
• /
• v.38 no.1
• /
• pp.53-70
• /
• 2016

This paper examines market concentration and its effect on competition in the Chinese commercial banking market. This study also investigates how changes in competition have affected the financial stability of Chinese commercial banks. To test the competitive conditions, we obtained the H statistic of the Panzar-Rosse model from a revenue function equation. The degree of financial stability is estimated by the Z-score formula. The Chinese banking industry has become an increasingly less concentrated market with an increased number of banks. Along with a decreased market concentration, competition in the Chinese banking industry has improved moderately. However, its market structure is still far from a competitive market. An individual bank's ability to earn higher markup or charge a higher net interest margin contributes to its financial soundness, although a higher degree of market concentration may have negative effect on the financial stability of the entire banking system.

• ETRI Journal
• /
• v.37 no.2
• /
• pp.428-437
• /
• 2015

This study was conducted to analyze the effect of information security activities on organizational performance. With this in mind and with the aim of resolving transaction stability in the securities industry, using an organization's security activities as a tool for carrying out information security activities, the effect of security activities on organizational performance was analyzed. Under the assumption that the effectiveness of information security activities can be bolstered to enhance organizational performance, such effects were analyzed based on Herzberg's motivation theory, which is one of the motivation theories that may influence information protection activities. To measure the actual attributes of the theoretical model, an empirical survey of the securities industry was conducted. In this explorative study, the proposed model was verified using partial least squares as a structural equation model consisting of IT service, information security, information sharing, transaction stability, and organizational performance.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_3
• /
• pp.1341-1347
• /
• 2023

This study proposes to ensure the seismic stability of an existing switchboard for emergency diesel generator by applying mode analysis, static analysis and dynamic analysis. First, a three dimensional model for the swithboard was made with simplification for mode analysis. Next, The mode analysis for the finite element model of the existing switchboard was performed. The 1st natural frequency below 33 Hz, the seismic safety cutoff frequency, was calculated to be 21.943 Hz. Finally, based on the seismic stability theory, the von-Mises equivalent stresses derived by structural analysis and response spectrum analysis under the normal and faulted conditions were 74.179 MPa and 49.769 MPa, respectively. These are less than specified allowable stresses. So seismic stability was confirmed.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.187-189
• /
• 2001

In this paper, we have simulated the transient stability of power system with dynamic loads. Dynamic load characteristics have an important influence on power system stability. In study of power system stability, motors form a major portion of the system loads. Induction motors and synchronous motors in particular form the workhorse of the electric power industry. Therefore modelling of motors is important in system stability. We investigate the effect of motors loads of Kwang Yang network with three phase fault.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.1091-1095
• /
• 2022

Dynamic stability of the main spindle system shall be ensured when operating the planer miller for remanufacturing the planer miller. This paper explains the analysis process that determines the stability of the planer miller spindle system in the design stage using ANSYS, an analysis program. First, the dynamic stability of the main spindle system is verified through risk speed analysis in the rated RPM range of the planer miller through ANSYS Modal Analysis, and second, the stability and durability of the main spindle system are verified through ANSYS nCode Analysis.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.3
• /
• pp.207-214
• /
• 2006

In this paper, the stability of SA(Spectral Acceleration) fragility curves is studied for the two sets of elastic modulus of concrete. In doing that, general purpose structural analysis program and generally used probability density function are used. The results of structural analysis are represented by Bernoulli distribution which says damage or no damage. By the use of Maximum Likelihood Method, two parameters of lognormal distribution - median and standard deviation - are found. With them, the fragility curves are constructed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.10
• /
• pp.1387-1392
• /
• 2012

These days people use a lot of electric power, because industry advancement and a standard of living is elevated. So voltage stability analysis and control problems are very important in these days. U.S.A has already developed voltage stability analysis program, and use it on power transmission scheme such as generator overhaul, transmission line off and so on. So voltage stability analysis is more and more interested in Korea, too. In this paper, we introduce a standard theory of voltage stability analysis and real time voltage stability analysis program that use sPMU(Satellite Phasor Measurement Unit). And we also introduce the calculation result about voltage stability in Jeju power transmission system.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.4
• /
• pp.31-39
• /
• 2011

One of the main drawbacks of wood fibers based composite materials are their tendency to swell due to moisture uptake in wet and moist environments. The main contribution to the hygroexpansion usually comes from the hydrophilic wood fibers. Recent trend toward the high speed printing, copying, and precision converting precesses demands a high level of dimensional stability under various environmental conditions. The purpose of this study was to investigate the dimensional stability of softwood bleached kraft pulp handsheets depending on wet pressing conditions. By increasing the number of wet pressing, dimensional stability was decreased because of increased fiber-to-fiber bonding. Hygroexpansion of handsheets had a linear relationship with the relative bonded area and equilibrium moisture contents. Dip elongation was decreased when the number of wet pressing was increased because of increased fiber-to-fiber bonding to resist low load in water.