• Korean Journal of Materials Research
• /
• v.2 no.4
• /
• pp.285-292
• /
• 1992

Ultrathin(8nm) oxynitride (SiOxNy) film have been formed on Si(100) by rapid thermal processing(RTP) in $O_2$and $N_2$O as reactants. Compared with conventional furnace $O_2$ oxide, the oxynitride dielectrics shows better characteristics of I-V and TDDB, and less flat-band voltage shift. The oxynitride has a behavior of Fowler-Nordheim tunneling in the region of V 〉${\varphi}_0$ simialr to pure Si$O_2$oxide. The relative dielectric constant of oxynitride is higher than that of conventional pure oxide. Excellent diffusion harrier property to dopant(B$F_2$) is also observed. Nitrogen depth profiles by SIMS, AES, and XPS show nitrogen pile - up at Si$O_2$/Si interface, which can explain the improved properties of oxynitride dielectrics.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.55-55
• /
• 2009

FGB(Flexible Glasswool Backing) Submerged Arc Welding has been one of the main welding processes for one side butt welding in shipbuilding industries, which can efficiently improve the welding productivity by the addition of a supplementary filler metal into the molten weld pool. As recent ships have become larger in size, the application of high tensile and higher grade of steels has been continuously increased. Single pass FGB SA welding process accompanies such a high heat input when welding thick plates that the mechanical properties of weld metal can be dramatically degraded. This study has been performed in order to obtain high toughness and tensile properties of high heat input FGB SA welds, and to evaluate the effect of alloy elements on their mechanical properties. To complete welding 25mm-thick EH36 grade steel plate by single pass, 1.2mm diameter and 1.0mm long cut wires has been distributed in the groove before welding, and three different test coupons have been made using C-1.5%Mn, C-1.8%Mn-0.5%Mo, and C-1.4%Mn-1.7%Ni cut wires to investigate the influence of nickel(Ni) and molybdenum(Mo) on the mechanical properties of welds. Test results showed that the addition of Ni and Mo effectively promotes the formation of Acicular Ferrite(AF), while significantly reducing the amount of Grain Boundary Ferrite(GBF) in weld metal microstructures, which resulted in a beneficial effect on low temperature impact toughness and strength.

• Environmental and Resource Economics Review
• /
• v.17 no.2
• /
• pp.313-326
• /
• 2008

This paper is concerned with the effect of an increase in the import price of LNG on the Korean economy and industries. A computable general equilibrium analysis is applied to compute the comparative-statical effect of 10% rise of LNG price. The price increase places relatively heavy burden on the city gas, oil products and thermal power, decreasing their outputs and domestic sales by relatively larger percentages than other industries. The 10% increase in the LNG price reduces GDP by 0.4% and raises the general price level by 0.08%. The increase in oil price resulting in the same decreasing rate of GDP caused by the 10% LNG price rise turns out to raise the general price level and reduce the consumer's welfare in terms of equivalent variation by less percentage than the increase in LNG price.

• Journal of Environmental Science International
• /
• v.13 no.4
• /
• pp.349-357
• /
• 2004

Emergy is a measure of the processes required to produce something expressed in units of the same energy form. Emergy based indices can provide insights into the thermodynamic efficiency of the process, the quality of its output, and the interaction between the process and its surrounding environment. However, in an industrial system, the inputs are mostly nonrenewable, renewable energy source is nearly zero, ultimate purpose is pursuit of profits in economic activity. In study, we present two indices based on emergy - EEE(Ecological Economic Efficiency) and ERI(Environmental Responsibility Index). The EEE is taken into account real value of product in market economy. The ERI is shown to be a function of the net yield of the economy, its ‘load’ on the environment and ecological economic efficiency. Manufacturing industry of Korea produced the 30% of total GDP in 2001. We applied these indices to manufacturing industry for environmental management and further sustainable industry. As a results, the highest ERI is 0.34 in recycling industries, the lowest ERI is 0.01 in coke, refined petroleum products which is dominated by ELR. The higher ERI, the more friendly to environment. The suggested indices help us understand relative contributions of various alternatives in company's production and consumption activity, and provide a tool of decision-making for the rearrangement of future industries. Furthermore, they contribute to environmental friendly operation and consumption.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.390-397
• /
• 2017

Objectives: The purpose of this study was to evaluate concentrations in airborne total and respirable dusts in the cement manufacturing and handling industries. Methods: Fifty-three total dust and 42 respirable dustsamples were collected from 24 work places. Total dust samples were collected using a three-stage cassette. Respirable dust samples were collected using a cyclone equipped with a 37 mm, $5{\mu}m$ pore size PVC filter. Results: The geometric means of the dust concentrations were $0.10mg/m^3$ and $0.08mg/m^3$ in total dust and respirable dust, respectively. The Korean Occupational Exposure Limit($10mg/m^3$) was not exceeded, but the rate of exceeding the American Conference of Governmental Industrial Hygienist(ACGIH) Threshold Limit Value($1mg/m^3$) was 16.7%. Conclusion: When measuring the level of dust at cement manufacturers, the airborne concentration of respirable dust should be evaluated. In order to protect the health of workers exposed to cement dust, it is necessary to actively consider strengthening the Korean Occupational Exposure Limit.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.83-93
• /
• 2007

This paper represents the development of 3-axises loadcell for measuring the side-force of suspension module of MPV(Multi Purposed Vehicle). The side force causes the failure of damper, such as leakage. The loadcell was developed using strain gauges, and the Wheastone bridge circuit to compensate for the cross-talk between the each axises and the measurement error by temperature. Structure analysis of loadcell was accomplished with FEM(Finite Element Method) to optimize the location of strain gages. The design optimization for important factors that have an effect on performance of loadcell was accomplished by using DOE(Design of Experiment). Loadcell was produced and successfully tested, showing good sensitivity and low cross-talk. The cross-talk of the developed loadcell is bellow 5%. The load history was measured at proving ground. The maximum side-force, the longitudinal force, and vertical force of MPV are 4.2 kN, 8.0 kN, and 17.0 kN, respectively, at Belgian road.

• Environmental and Resource Economics Review
• /
• v.24 no.4
• /
• pp.727-745
• /
• 2015

This paper analyzes the firms' optimization behavior in response to rising demand for non-priced renewable energy in the manufacturing industries by using an input distance function. The annual estimates of the shadow price of renewable energy is derived and the trend of its shadow price over time is analyzed. The degree of substitution of renewable energy for fossil-fuels is examined. The input-based Malmquist productivity index, defined as a composite of the technical efficiency and technical change measures, is measured. The contribution of renewable energy input growth to the Malmquist index is analyzed. Empirical results indicate that the shadow price of renewable energy declined at an average annual rate of 17% over the period 1992-2012. Substitutability between renewable energy and fossil-fuels was limited. On average, a 1% increase in renewable energy would decrease Malmquist index by 0.04% per year.

• Journal of the Korea Convergence Society
• /
• v.12 no.3
• /
• pp.217-224
• /
• 2021

Based on the hyper-connectivity of the 4th Industrial Revolution, the paradigm shifts to the sharing economy. Didichuxing has already dominated the platform and is expanding its service to the TaaS 3.0 mobility industry. This paper aimed to suggest the direction of the domestic car-sharing industry and service improvement plan by analyzing Didichuxing. Korea is being cut off from the car-sharing industry, due to conflicts with existing industries and high regulations. It is necessary to balance the protection of existing industries and fostering new industries in the direction of negative regulations. In the future, it is also necessary to study how various fields of the sharing economy will convergence and develop.

• Journal of Preventive Medicine and Public Health
• /
• v.14 no.1
• /
• pp.97-110
• /
• 1981

This study was conducted in order to investigate the status of harmful working environ ment on twelve rubber and ten chemical products manufacturing industries in Busan area over a period of five months from lune 1 to October 31, 1980. The summarized results were as follows: 1. The highest and lowest mean values of harmful environmental elements in workroom of rubber products manufacturing industries were noted in twisting (98.7dB) and coating department (77.3dB) to noise, molding ($6.43mg/m^3$) and forming ($1.33mg/m^3$) to dust, bonding (toluene 463.7ppm, xylene 457.8ppm and benzene 111.8ppm, respectively) and splicing (toluene 90.0ppm, xylene 83.3ppm and benzene 6.7ppm, respectively) to organic solvents, respectively. Also in chemical products manufacturing, they were noted in grinding (95.1dB) and shining department (76.8dB) to noise, packing ($4.30mg/m^3$) and staining ($3.20mg/m^3$) to dust, shining (393.3ppm and 375.0ppm, respectively) and varnishing(125.5ppm and 121.7ppm, respectively) to toluene and xylene, and scattering (51.8ppm) and mixing (23.9ppm) to benzene, respectively. 2. The mean values of harmful elements in workroom of rubber products manufacturing were 86.3dB to noise, $4.16mg/m^3$ to dust, 258.2ppm to toluene, 230.3ppm to xylene, and 5 4.0ppm to benzene, respectively. Also in chemical products manufacturing, they were 85.2dB to noise, $3.69mg/m^3$ to dust, 227.9ppm to toluene, 213.2ppm to xylene, and 36.3ppm to benzene, respectively. 3. Number of workers exposed to harmful working environment, over TLV, of a total 10,195 workers in rubber products manufacturing were 1,002(9.8%) to noise, 212 (2.1%) to dust, 1,581(15.5%) to toluene, 1,509(14,8%) to xylene, and 1,524(15.0%) to benzene, respectively. Number of workers exposed to harmful working environment, over TLV, of a 1,913 workers in chemical products manufacturing were 112(5.9%) to noise, 132(6.9%) to each organic solvent, respectively. 4. The values of noise and dust of rubber and chemical products manufacturing in 1980 were lower then those in 1977, but the value of organic solvent in 1980 was similar with that in 1977.

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.513-518
• /
• 2003

La/sub 2/3-x/Li/sub 3x/□/sub 1/3-2x/TiO₃ compounds with x=0.13 and 0.12 were prepared by slow cooling (x=0.13) and rapid quenching (x=0.12) into the liquid nitrogen after sintering at 1350℃ for 6 h. Their crystal structure has been determined by Rietveld refinement of both the powder neutron and X-ray diffraction data. From neutron diffraction data, we found that the main phase was not tetragonal (P4/mmm), but trigonal (R3cH). The refinement of neutron diffraction for the slow cooled samples were in a good agreement with a new model; a mixture of trigonal (R3cH, 45.7 wt％), tetragonal (p4/mmm, 37.0 wt％), and Li/sub 0.57/Ti/sub 0.86/O₂(pbnm, 17.2 wt%), but the quenched sample was found not to contain tetragonal (p4/mmm). X-ray diffraction data couldn't be well fitted because of the Poor scattering factor of lithium ions and the similar reflection patterns among trigonal (R3cH), tetragonal (p4/mmm), and cubic (Pm3m). We also knew that one transport bottlenecks is destroyed by one La vacancy in the case of trigonal (R3cH).