• Resources Recycling
• /
• v.25 no.1
• /
• pp.40-47
• /
• 2016

Nickel laterite ore is classified into two principal ore types: saprolite (silicate ore) and limonite (oxide ore). Saprolite-type ore characterized by high magnesia and silica contents is treated by pyrometallurgy process. On the other hand, limonite-type ore is subjected to hydrometallurgy process to produce nickel products. Hydrometallurgy process requires that a raw material to meet the demands that Si+Mg contents lower than 10% and Fe content over than 40%. It is therefore required that separation of saprilite-type ore to use nickel laterite ore as a raw material for hydrometallurgy process. In this study, separation of sparolite-type ore and limonite-type ore from nickel laterite ore from New Caledonia has been tried by dry classification. The results show that -5 mm size fraction and +5 mm size fraction of the nickel laterite ore contains mainly limonite-type ore and saprolite-type ore, respectively. To understand the moisture content of the raw ore on the dry classification, nickel laterite ore with different moisture contents of 23.0% and 9.1% were subjected to the dry classification. The results show that drying of the ore makes the separation more efficient as the amount of the fine product, that can be subjected to hydrometallurgy process without further separation or drying operations, was increased.

• Health Policy and Management
• /
• v.2 no.2
• /
• pp.112-130
• /
• 1992

Patient care services are provided to individual patients in response to their health needs produced by illnesses or injuries. The services are often addressed to very serious conditions, and also they constitute the most expensive component of health care services. Therefore, the importance of quality is emphasized, but there are many indications that patient care quality is far from a satisfactory state in most of the countries. Based upon this observation, it is attempted to examine obstacles and approaches to quality improvement in patient care services. In doing so, following Taguchi's(1986) definition of product quality, quality of patient care services is conceived of as better when the less is the sociental loss attributalbe to variability of intended function and harmful side effects they emhibit after being delivered. Some distinguishing features of medical care sector pose difficulties in implementing effective quality improvement programs in patient care services. Nevertheless, newly proposed method of quality management, based on industrial quality management approach, seems to have a great deal of potential to effectively cope with such difficulties. This method, unlike the traditional approach to quality assurance, focuses on total organisational processes, not individuals, as the obproach to quality assurance, focuses on total organizational processes, not individuals, as the objects of quality improvement; variation, not comparison with standards, in quality measurement; and continuous improvement, not removing only bad quality care, as an ideal. Prerequisite to a successful use of any quality mangement method is motivating providers to improve quality. Conceivable approaches for such motivation are self-regulation, external controls and promotion of competition. Since these approaches are not mutually exclusive, they may be employed in an appropriate combination. In Korea, medical care providers are now functioning under the circumstances where they have little reason for making efforts to improve quality of their services. Once these circumstantial conditions are changed to exert pressures on providers to improve quality, the use of adequate quality management method becomes an issue. In this connection, much attention shoould be directed to the newly proposed method described above. In all these efforts for improving quality of patient care services, health insurance would be able to play a pivotal role. Poviders of medical care, buth indiciduals and organizations, are usually very responsive to the measures that affect their financing, and thus health insurance can be a strong instrument for motivationg providers to improve quality. Also, the insurance continuously acquires data on patient care, which could be processed to produce information required to effective quality control.

• Journal of Surface Science and Engineering
• /
• v.51 no.4
• /
• pp.207-213
• /
• 2018

Not only efficiency of chlorine evolution reaction (CER) but also durability namely service life is very important property in dimensional stable anode for Ballast Water Management System (BWMS) for marine ships. Many researchers have been focused on improving efficiency of CER by controlling composition, phase and surface area for a long time, but the efforts to increase durability was relatively small. In this study, we have investigated the effect of $TiO_2$ protective interlayers on efficiency and durability of DSA electrodes. $TiO_2$ protective interlayers were prepared by thermal oxidation at 500, 600 and $700^{\circ}C$ on Ti substrate. And then the DSA electrodes consisting of $Ti/RuO_2-PdO-TiO_2$ were prepared by thermal decomposition method on $TiO_2$ interlayers. The efficiencies of CER of DSA electrodes without $TiO_2$ interlayer and with $TiO_2$ interlayer grown at 500, 600 and $700^{\circ}C$ were 94.19, 94.45, 84.60 and 76.75% respectively. On the otherhand, durabilities were 30, 55, 90 and 65 hours respectively. In terms of industrial aspect, the performance of DSA is considered high efficiency and durability which can correspond to total production of chlorine. If we considered the performance index of DSA as the product of efficiency and durability, performance indices could be recalculated as 28.26, 50.85, 76.14 and 49.89 respectively. As the thermal oxidation temperature increasing, life time were increased remarkerbly, while efficiency of CER was decreased slightly. As a result, DSA electrode with $TiO_2$ interlayer grown at $600^{\circ}C$ has shown about 2.7 times performace of original DSA electrode without $TiO_2$ interlayer.

• Journal of Distribution Science
• /
• v.9 no.3
• /
• pp.25-36
• /
• 2011

Owing to the rapid growth of hypermarket/discount store formats since 1996, Korean retailing has suddenly attracted the significant attention from researchers. Before the emergence of large scale retailers such as E-Mart, Lotte Mart and Tesco Korea, there were the two retail formats who led the Korean retailing in the modern retailing history: department store and supermarket formats. Nevertheless, there has been little literature concerned about the two retail formats as a case study, while some authors have paid their attention to hypermarket/discount store formats. In addition, when mentioning the development process of retailing history, it is less likely that authors have made an effort to illustrate supermarket retailing history. In order to regard supermarket retailing as part of the Korean retailing, it is interesting to look at a representative supermarket retailer, Haitai, who was one of the subsidiaries of Haitai chaebol. Based on supermarket retailing, the company which was established as a joint venture in 1974 led a supermarket retailing in the Korean modernised retailing history. Before analysing whether Haitai failed or not, the definition of failure should be illustrated. With regard to the term, failure, in the academic world, authors have interchangeably used the following terms: failure, divestment, closure, organisational restructuring, and exit. To collect research data as a case study, the author adopted an in-depth interview method. The research is based on research interviews with 13 ex-staff who left after Haitai went bankruptcy, from store management department to merchandise department. By investigating Haitai's experiences through field interviews, the research found that Haitai restructured organisational decision-making process at the early stage when companies started to modernise organisational charts, benchmarking sophisticated retailing knowledge through the strategic alliance with a Japanese retailer. In respect of buying system, the company established firmly buying functions by adopting central buying system, and further, outstandingly allocated considerable marketing resources to the development of retailer brands with the dedicated team of retailer brand development. In the grocery retailing, abandoning a 'no-frill' packaging concept, the introduction of retailer brand packaging equal to, or better than national brand packaging design, encouraged other retailers to change their retailer brand development strategies. In product sourcing ways, Haitai organised for the first time the overseas sourcing team with the aim of improving the profit margins of foreign products and providing exotic products for customers, followed by other retailers. Regarding distribution system, the company introduced the innovative idea which delivered products ordered by stores directly to each store withboth its own vehicles and its own warehouse in which could deal with dry foods, chilly foods, frozen food, and non-foods, and even, process produce. In addition, Haitai developed many promotional methods to attract more customers like 'the guarantee of the lowest price', and expanded its own business to US in 1996, although withdrew, because of bankruptcy in 1997. Together with POS introduction in 1994, Haitai made a significant contribution to the development of the Korean retailing, influencing other retailers in many aspects. As a case study, the study has provided a number of lessons from Haitai's experiences for academicians and practitioners, suggesting that its history should be involved in the Korean modernised retailing.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.10
• /
• pp.53-65
• /
• 2019

Purpose - Current study aimed at investigating the effects of the choice easiness as a thought triggered at the time of making decision and the goal achievement emotion as a prediction of how consumers feel in the state of achieving consumption goal on brand purchase intention. And It also explored moderation role of incidental pride type such as ambient hubris pride and ambient authentic pride felt before the event in the effects of message type such as self-verifying message and self-enhancing message on the choice easiness and the goal achievement emotion. Research design, data, and methodology - Message type was divided into self-verifying message and self-enhancing message. Incidental pride type was divided into hubris and authentic pride. Smart mobile phone was selected for empirical study. And the experiment was performed with 2(pride type: hubristic versus authentic) × 2(message type: self-verifying message versus self-enhancing message) between-subjects design. Questionnaires from 215 undergraduate students were used to test hypotheses by Macro process model 7. The hypotheses were tested at each of self-verifying message group and self-enhancing message group. Results - First, both choice easiness and goal achievement emotion positively influenced on the purchase intention at both self-verifying message group and self-enhancing message group. Second, at self-verifying message group, the positive effects of self verification on both choice easiness and goal achievement emotion were higher to the customers under incidental hubris pride than to those under incidental authentic pride customers. Third, at self-enhancing message group, the positive effects of self enhancement on goal achievement emotion were higher to the customers under incidental authentic pride than to those under incidental hubris pride. However, at self-enhancing message group, the positive effects of self enhancement on choice easiness (goal achievement emotion) were not higher (higher) to the customers under incidental authentic pride than to those under incidental hubris pride. Conclusions - Focusing on the results of this study, to promote their brand purchase intention, brand managers should use self-enhancing message to induce goal achievement emotion from incidental authentic pride customers. And the brand managers should develop and use self-verifying message to induce choice easiness as well as goal achievement emotion from hubris pride customers, which in turn, promote their brand purchase intention.

• Journal of Convergence for Information Technology
• /
• v.9 no.12
• /
• pp.141-146
• /
• 2019

Economic analysis predicts that the drone market will grow, and the growth of the toy and hobby drone market is expected to gradually expand. Drone expectations are rising due to the net economic function of drone market growth, but accidents due to improper management and operations are also increasing. The difference in toy drone performance is incomparably small compared to industrial drone performance, but the ordinary buyer can not know whether the difference can cause an accident during use. The toy drones used in this study were obtained from KC and CE certification, and 20 kinds of drones were used. The flight time ranged from a minimum of 3 minutes to a maximum of 12 minutes, and the control distance ranged from a minimum of 20m to a maximum of 380m. Therefore, it is necessary to secure product safety through sampling inspection of the radio wave output of toy drones, and it is also necessary to mount an algorithm that automatically lowers the altitude or hover when exceeding the limit flight distance. For future research, we will build data to establish toy drone safety standards through a altitude testing and impact testing of toy drone.

• Korean Journal of Plant Resources
• /
• v.31 no.4
• /
• pp.312-321
• /
• 2018

Angelica tenuissima, also known as Ligusticum tenuissimum, is classified as a food-related plant and has been used as traditional medicines treating headache and anemia in Asia. However, its anti-melanogenic effect has not been reported in detail. When the extract of Angelica tenuissima (ATE) was prepared by the extraction with 70% EtOH at $80^{\circ}C$ (final yield = 22%), the contents of decursin and Z-ligustilide in ATE were determined 0.06% and 8.43%, respectively. Total flavonoid and phenolic content in mg ATE were $5.52{\pm}0.07{\mu}g$ quercetin equivalents and $237.27{\pm}13.24{\mu}g$ gallic acid equivalents, respectively. Antioxidant capacity of ATE determined by DPPH and ABTS assay was increased with a dose dependent manner up to $1000{\mu}g/m{\ell}$. The amount of melanin synthesis followed by ${\alpha}-melanocyte$ stimulating hormone on B16F10 cells were significantly reduced in the presence of ATE (250 to $1000{\mu}g/m{\ell}$, p<0.05). ATE (125 to $1000{\mu}g/m{\ell}$, p<0.05) suppressed the tyrosinase activity but did not show any significant effect on ${\alpha}-glucosidase$ activity at the same condition. Taken together, ATE possesses tyrosinase inhibitory potential with significant antioxidant capacities. These effects of ATE might be involved in suppression of melanin synthesis, at least, in B16F10 cells. The anti-melanogenic potential of ATE will provide an insight into developing a new skin whitening product.

• Journal of Intelligence and Information Systems
• /
• v.24 no.3
• /
• pp.67-88
• /
• 2018

Until recently, as we recognize the significance of sustainable growth and competitiveness of small-and-medium sized enterprises (SMEs), governmental support for tangible resources such as R&D, manpower, funds, etc. has been mainly provided. However, it is also true that the inefficiency of support systems such as underestimated or redundant support has been raised because there exist conflicting policies in terms of appropriateness, effectiveness and efficiency of business support. From the perspective of the government or a company, we believe that due to limited resources of SMEs technology development and capacity enhancement through collaboration with external sources is the basis for creating competitive advantage for companies, and also emphasize value creation activities for it. This is why value chain network analysis is necessary in order to analyze inter-company deal relationships from a series of value chains and visualize results through establishing knowledge ecosystems at the corporate level. There exist Technology Opportunity Discovery (TOD) system that provides information on relevant products or technology status of companies with patents through retrievals over patent, product, or company name, CRETOP and KISLINE which both allow to view company (financial) information and credit information, but there exists no online system that provides a list of similar (competitive) companies based on the analysis of value chain network or information on potential clients or demanders that can have business deals in future. Therefore, we focus on the "Value Chain Network System (VCNS)", a support partner for planning the corporate business strategy developed and managed by KISTI, and investigate the types of embedded network-based analysis modules, databases (D/Bs) to support them, and how to utilize the system efficiently. Further we explore the function of network visualization in intelligent value chain analysis system which becomes the core information to understand industrial structure ystem and to develop a company's new product development. In order for a company to have the competitive superiority over other companies, it is necessary to identify who are the competitors with patents or products currently being produced, and searching for similar companies or competitors by each type of industry is the key to securing competitiveness in the commercialization of the target company. In addition, transaction information, which becomes business activity between companies, plays an important role in providing information regarding potential customers when both parties enter similar fields together. Identifying a competitor at the enterprise or industry level by using a network map based on such inter-company sales information can be implemented as a core module of value chain analysis. The Value Chain Network System (VCNS) combines the concepts of value chain and industrial structure analysis with corporate information simply collected to date, so that it can grasp not only the market competition situation of individual companies but also the value chain relationship of a specific industry. Especially, it can be useful as an information analysis tool at the corporate level such as identification of industry structure, identification of competitor trends, analysis of competitors, locating suppliers (sellers) and demanders (buyers), industry trends by item, finding promising items, finding new entrants, finding core companies and items by value chain, and recognizing the patents with corresponding companies, etc. In addition, based on the objectivity and reliability of the analysis results from transaction deals information and financial data, it is expected that value chain network system will be utilized for various purposes such as information support for business evaluation, R&D decision support and mid-term or short-term demand forecasting, in particular to more than 15,000 member companies in Korea, employees in R&D service sectors government-funded research institutes and public organizations. In order to strengthen business competitiveness of companies, technology, patent and market information have been provided so far mainly by government agencies and private research-and-development service companies. This service has been presented in frames of patent analysis (mainly for rating, quantitative analysis) or market analysis (for market prediction and demand forecasting based on market reports). However, there was a limitation to solving the lack of information, which is one of the difficulties that firms in Korea often face in the stage of commercialization. In particular, it is much more difficult to obtain information about competitors and potential candidates. In this study, the real-time value chain analysis and visualization service module based on the proposed network map and the data in hands is compared with the expected market share, estimated sales volume, contact information (which implies potential suppliers for raw material / parts, and potential demanders for complete products / modules). In future research, we intend to carry out the in-depth research for further investigating the indices of competitive factors through participation of research subjects and newly developing competitive indices for competitors or substitute items, and to additively promoting with data mining techniques and algorithms for improving the performance of VCNS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.527-536
• /
• 2016

This study aims to generate baseline data for vitalizing the sales of functional cosmetics through an Importance-Performance Analysis (IPA) of the selection attributes of functional cosmetics. From the analysis of consumers' selection criteria, the study will assist functional cosmetics companies in reflecting consumer demands and therefore securing competitiveness. For this, general consumers aged over 20 years were surveyed for 5 weeks from Feb 23 through Mar 30, 2015, and 447 empirical data (response rate 88.9%) were processed through SPSS WIN 21.0 program for analysis. To conduct gender difference analysis on the IPA of the selection attributes of functional cosmetics, 17 selection attributes were categorized into 4 factors: functionality, labeling, popularity, and product. Cronbach's alpha for all factors was 0.5, proving the internal consistency and reliability of the survey. The survey results showed that while the entire average came out significantly higher for females (5.89/7points) than for males (5.66/7points) (p<0.001), the selection attributes 'anti-wrinkling', 'whitening function', 'functionality', 'expiration date', 'full ingredient labeling system' and 'various promotional events' showed significant gender differences. IPA results pertaining to gender showed 'price', 'functionality', 'spreadability' and 'full ingredient labeling system' as 2nd quadrant attributes, whereas female consumers selected 'price', 'whitening function', 'anti-wrinkling', 'functionality' and 'full ingredient labeling system' as attributes. Results show that businesses in the field of cosmetics and related areas need to prioritize improving the following factors that received low satisfaction from all consumers: 'price', 'functionality', and 'total labeling.' In particular, the 'price' aspects are considered to require reasonable and affordable pricing.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.4
• /
• pp.314-323
• /
• 2006

This study was conducted to identify ingredients of thinners and to confirm reliability of material safety data sheets (MSDS) of thinners for public and workers' health. The 41 thinner products were collected from paint shops located in Busan and Gyeongnam province. The 12 thinner products among them were identified using product MSDS. GC-MSD was used to analyze 41 kinds of thinners qualitatively and quantitatively. The 12 products MSDS were compared with thinner's component through qualitative analysis to confirm MSDS. Chemical ingredients, such as Benzene, Toluene, and Xylene etc., of thinners were analysed in quantity. The 41 thinner products contained 17 disclosed specific, trade name, or generically described chemical solvent ingredients. These 17 ingredients came under 6 classes: alcohols, aromatic hydrocarbons, esters, glycol ethers, ketones, and mixtures. These 17 ingredients were important in the view of industrial hygiene and had occupational exposure limit in the ambient, such as toluene, xylene, acetone, nonane, EGEE, heptane, cumene, MIBK, indene, tri-methyl benzene, etc, were found in 41 kinds of thinners. Aromatic hydrocarbons were the most identified ingredient in thinners. Especially, the benzene, which induces leukemia, was found in 4 kinds of thinners. The content rates of benzene in thinners were 0.25~1.18%. The benzene in enamel thinner, which were 0.39~0.72%, was highest from chemical classification. The contents of toluene, which was found from 27 kinds of thinners, were 5.35~64.16%, which were highest in sobu thinner as 58.80%. Xylene was found from 22 kinds of thinners and contents of xylene were 4.61~72.42%. Acrylic thinner's contents of xylene were 12.06~51.05%, which was most high. It was found that contents of benzene were increased and frequency of detection was decreased through comparison with other study. The MSDS possession rate of paint shops was low as 29.27%. So it did not provide information with public or workers. Mean of agreement rate between MSDS and components of thinners through qualitative analysis was 42.01% and it has wide range from 8.3% to 75%. There are many deficiencies in MSDS about component of thinners. In some case of sample, expecially, despite containing benzene, information was not written it on MSDS.