• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.619-625
• /
• 2017

In this study, the formation of hydroxyl radical and decomposition characteristics of bisphenol A (BPA) was investigated by quantifying hydrogen peroxide formed as a reaction by-product during the formation stage of hydroperoxyl radical. The direct oxidation reaction by ozone only decomposed BPA just like the Criegee mechanism under the condition where radical chain reactions did not occur. Non-selective oxidation reactions occurred under the conditions of pH 6.5 and 9.5 where radical chain reactions do occur, confirming indirectly the formation of hydroxyl radical. The decomposition efficiency of BPA by the added catalysts appeared in the order of $O_3$/PAC ${\geq}$ $O_3/H_2O_2$ > $O_3$/high pH > $O_3$ alone. 0.03~0.08 mM of hydrogen peroxide were continuously measured during the oxidation reactions of ozone/catalyst processes. In the case of $O_3$/high pH process, BPA was completely decomposed in 50 min of the oxidation reaction, but reaction intermediates formed by oxidation reaction were not oxidized sufficiently with 29% of the removal ratio for total organic carbon (TOC, selective oxidation reaction). In the case of $O_3/H_2O_2$ and $O_3$/PAC processes, BPA was completely decomposed in 40 min of the oxidation reaction, and reaction intermediates formed by the oxidation reaction were oxidized with 57% and 66% of removal ratios for TOC, respectively (non-selective oxidation reactions).

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.419-424
• /
• 2018

In this work, effect of the culture medium composition on the fermentation process of Clostridium ljungdahlii, which is acetogenic bacteria to product ethanol from synthesis gas, was examined to improve the microbial growth and ethanol production. Components of the culture medium such as yeast extract, fructose, $NH_4Cl$, and $K_2HPO_4$ were selected as influence factors for the cell growth and ethanol production. As the concentration of yeast extract increased, both of the cell growth and ethanol production increased. And the ethanol productivity was the highest at an yeast extract of 0.05 g/L, which is lower than that of base medium. As the concentration of fructose increased, the cell growth increased, but the ethanol production decreased when the concentration of fructose was higher than that of base medium (5 g/L). In an experiment with the yeast extract of 5 g/L, produced ethanol concentration was the highest (0.297 g/L) when fructose concentration was 5 g/L, however, the specific ethanol productivity was higher (0.281 g/g DCW) when the fructose was not added due to very low cell mass. The cell growth and ethanol production were not significantly influenced by $NH_4Cl$ concentration, however the growth inhibition was observed at a 30 g/L of $NH_4Cl$. When the concentration of $K_2HPO_4$ increased, both of the cell growth and ethanol production increased. In experiments with $NH_4Cl$ and $K_2HPO_4$, specific ethanol productivities were higher when the low concentration of yeast extract was used.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.405-412
• /
• 2018

Three types of bis[3-(dialkyloxylphosphorothionyl) thio-2-methylpropanyloxy]alkane (BAPA) drived from alkane diol were synthesized. The principal chain of each BAPA had a different carbon number, i.e., 6, 9, and 11. The three types of synthesized BAPA were compared to zinc dialkyl dithiophosphates (ZDDPs) in terms of abrasion resistance. A four-ball test was conducted to evaluate the anti-abrasion performance of the synthesized BAPA according to the length of the principal carbon chain. Each product was added to an additive at a concentration of 1% of the base oil weight, and the wear scar diameter (WSD) was measured as 0.472, 0.459, and 0.480 mm, respectively. Among the BAPA compounds, dialkyl dithiophosphoric acid (DDP), which is the side chain of bis[methacryloyloxy] nonane (BMOO9), was synthesized by varying the carbon number, i.e., 4, 8, and 12, and subsequently the 4-ball test was carried out. The WSD was determined as 0.537, 0.459, and 0.531 mm, respectively. As a result, it was found that when a side chain is short, a thin film is formed. In contrast, a long side chain hindered the formation of a film, and hence the best result was achieved when the carbon number was 8. As for the ZDDPs, the WSD was determined to be 0.563 mm, when measured under the same conditions. The measurements confirm that the synthesized BAPA compounds are superior to the ZDDPs as abrasion resistance additives.

• Journal of Hydrogen and New Energy
• /
• v.24 no.5
• /
• pp.359-366
• /
• 2013

This work is investigated for the catalytic decomposition of hydrogen iodide (HI). Platinum was used as active material by loading on $ZrO_2-SiO_2$ mixed oxide in HI decomposition reaction. To obtain high and stable conversion of hydrogen iodide in severe condition, it was required to improve catalytic activity. For this reason, a method increasing dispersion of platinum was proposed in this study. In order to get high dispersion of platinum, zirconia was incorporated in silica by sol-gel synthesis. Incorporating zirconia influence increasing platinum dispersion and BET surface area as well as decreasing deactivation of catalysts. It should be able to stably product hydrogen for a long time because of inhibitive deactivation. HI decomposition reaction was carried out under the condition of $450^{\circ}C$ and 1 atm in a fixed bed reactor. Catalysts analysis methods such as $N_2$ adsorption/desorption analysis, X-ray diffraction, X-ray fluorescence, ICP-AES and CO gas chemisorption were used to measurement of their physico-chemical properties.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.56-64
• /
• 2008

Although the EGSE (Electrical Ground Support Equipment) and MCS (Mission Control System) have many similar or even identical functions, the EGSE used for assembly, integration and validation phase and the MCS for the mission operations phase are normally developed separately and used by different groups of engineers. However, the common ground system for EGSE and MCS has developed and many space missions such as PROBA (PRoject for On-Board Autonomy), ROSETTA, MARS EXPRESS, CRYOSAT (Cryosphere Satellite), GOCE (Gravity field and steady state Ocean Circulation Explorer), and GALILEO have used or will use it to minimize risk, reduce cost and improve overall product quality. It is based on ECSS (European Cooperation for Space Standards) E70 which is the international standard for ground systems and operations published by ECSS E70 Working Group. The ECSS E70 contains the basic rules, principles and requirements applied to the engineering of the ground systems and the execution of mission operations. This paper introduces standardization policy, organization and standard documentation in ECSS. The overview of ECSS E70 such as status, purpose and contents is also described in this paper.

• The Journal of Industrial Distribution & Business
• /
• v.2 no.1
• /
• pp.23-28
• /
• 2011

In recent years Mag-Geol-Li is becoming popular again and the consumption layer of Mag-Geol-Li is definitely younger. Nowadays, Mag-Geol-Li is the main traditional alcohol and without consideration of ages and genders whoever can enjoy Mag-Geol-Li. Producers should ensure fair price of goods and improve production facilities to maximize products to meet the needs of consumers who will buy. In the studies I discuss about the ways to improve the distribution of Mag-Geol-Li, the theories about Mag-Geol-Li, Social backgrounds and effects of Mag-Geol-Li why it is becoming popular and improvement of the distribution structure of Mag-Geol-Li and impact of big Mag-Geol-Li company in Mag-Geol-Li industry. Lately, people can enjoy Mag-Geol-Li without burden because of low alcohol. It is gaining a good response by consumers because Mag-Geol-Li contains lactobacillus, yeasts and dietary fiber, also it is well balanced with nutritional aspects. There are not only huge factory to produce Mag-Geol-Li but also most are still cottage industry. Therefore, quality management does not work well because the majority of Mag-Geol-Li is small businesses. In spite of there are a lot of ways to improve the distribution structure and problems of Mag-Geol-Li, but none provide any improvement that make consumer awareness about the main cause of the problem is inaccurate. The ultimate goal of improving the distribution structure of Mag-Geol-Li is activating the market, the improvement of production facilities and safe for consumers with affordable price and good quality product. As mentioned above, to improve and change the logistics systems and hygiene, government support is required and Mag-Geol-Li companies should be recognized the distribution system as a major problem.

• Korean Journal of Materials Research
• /
• v.25 no.2
• /
• pp.75-80
• /
• 2015

The carbon dioxide($CO_2$) released while producing building materials is substantial and has been targeted as a leading contributor to global climate change. One of the most typical method to reducing $CO_2$ for building materials is the addition of slag and fly ash, like pozzolan material, while another method is reducing $CO_2$ production by carbon negative cement development. The MgO-based cement was from the low-temperature calcination of magnesite required less energy and emitted less $CO_2$ than the manufacturing of Portland cements. It is also believed that adding reactive MgO to Portland-pozzolan cements could improve their performance and also increase their capacity to absorb atmospheric $CO_2$. In this study, the basic research for magnesia cement using $MgCO_3$ and magnesium silicate ore (serpentine) as main starting materials, as well as silica fume, fly ash and blast furnace slag for the mineral admixture, were carried out for industrial waste material recycling. In order to increase the hydration activity, $MgCl_2$ was also added. To improve hydration activity, $MgCO_3$ and serpentinite were fired at $700^{\circ}C$ and autoclave treatment was conducted. In the case of $MgCO_3$ as starting material, hydration activity was the highest at firing temperature of $700^{\circ}C$. This $MgCO_3$ was completely transferred to MgO after firing. This occurred after the hydration reaction with water MgO was transferred completely to $Mg(OH)_2$ as a hydration product. In the case of using only $MgCO_3$, the compressive strength was 3.5MPa at 28 days. The addition of silica fume enhanced compressive strength to 5.5 MPa. In the composition of $MgCO_3$-serpentine, the addition of pozzolanic materials such as silica fume increased the compression strength. In particular, the addition of $MgCl_2$ compressive strength was increased to 80 MPa.

• Journal of Distribution Science
• /
• v.11 no.10
• /
• pp.107-116
• /
• 2013

Purpose - Eggs are nutritionally complete and one of the most popular natural foods. Moreover, the poultry industry is one of the important food industries. However, early industrialization of the poultry industry on its own did not lead to further development compared to other livestock industries. In this study, we investigate what factors influence consumers' behavior and how consumers' understanding of retail business affects their propensity to consume. This study is different from other studies as it analyzes how the brand names of manufacturers and distribution companies affect the purchasing characteristics or actual purchase behavior of consumers in order to suggest how these manufacturers and distribution companies can increase their competitiveness. Research design, data, methodology - This study conducted a survey of 250 randomly selected egg purchasers in discount stores from January to April 2013. Consumers' purchase tendencies were calculated through frequency analysis. This result was then utilized using cluster analysis to draw a conclusion about which purchase tendency influenced consumers buying three different brands of eggs or whether this tendency really affected consumers. As a result, the outcomes of Hypotheses 2 and 3 were not clear so we drew a conclusion with our analysis of Hypothesis 1. Results - While the outcomes of Hypotheses 2 and 3 did not clearly indicate whether purchasing tendencies affected consumers when buying eggs, our analysis of Hypothesis 1 indicated that consumers were affected by the quality of the eggs rather than exterior factors such as the brand name. Thus, we concluded that it is important to promote the excellence of the quality of the eggs. Usually firms buy eggs from farms and repackage them in order to sell them. In this sense, if consumers were aware of this egg production process, and eggs were fairly distributed to retailers, large retail PB businesses would also be able to enhance their competitiveness. Conclusions - The brand, packaging, retail outlet, and other external features influenced the purchase of eggs to a certain degree, while shelf life, grade of the eggs, cleanliness, and other intrinsic characteristics had more influence. In particular, shelf life was the most important factor influencing purchase. Consumers were influenced not only by intrinsic characteristics of the eggs but also by large-scale producers' brands. Consumers relied upon the brand despite reduced competition because they found it difficult to identify shelf life and/or cleanliness. Small businesses and/or large-scale retailers can remain competitive by maintaining the freshness and cleanliness of the eggs. Further studies need to investigate areas in which consumers' cognition of the product is poor and/or the purchase inclination with regard to less developed industries such as eggs. In this study, the greatest problem was that consumers did not consume in accordance with the current situation as consumers have preferred fresh and clean eggs for a long time compared to purchase decisions based on external brands and/or packaging.

• Microbiology and Biotechnology Letters
• /
• v.41 no.3
• /
• pp.263-271
• /
• 2013

A xylanase-producing bacterium was isolated from a soil sample collected in Yongin city, Korea. The strain was aerobic and gram positive, and grew between pH 5.0 and 11.0, forming a yellow-colored colony. The strain was classified as a novel subspecies bacterium of Paenibacillus barcinonensis by 16S rRNA gene sequence similarity, phylogenetic analysis, phenotypic, and biochemical characteristics, and thus named Paenibacillus sp. HX-1. This strain produced extracellular endo-${\beta}$-1,4-xylanase, and the best xylanolytic activity (205.17 unit/ml) was obtained at 96 h in an optimized TNX medium containing 1% (w/v) bacto tryptone, 1% (w/v) NaCl, and 0.7% (w/v) beechwood xylan at pH 7.0, $37^{\circ}C$ and 200 rpm. The endo-${\beta}$-1,4-xylanase produced by the strain HX-1 yielded xylobiose as the end product from beechwood xylan hydrolysis. The enzyme exhibited optimum pH and temperature at pH 7.0 and $45^{\circ}C$, respectively. The remarkable enhancing effect of the TNX medium on xylanase production by HX-1, in spite of its simple formula, may have great advantages for industrial applications of xylanase.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.1
• /
• pp.1-15
• /
• 2018

Nation-wide systematic and comprehensive measurements of air quality criteria species have been made over 340 sites currently in Korea since 1990. Using these data, temporal and spatial trends of $SO_2$, $PM_{10}$, $NO_2$, $O_3$, CO and $O_x(NO_2+O_3)$ were analyzed to characterize and evaluate implementing efficiency of air quality policy and regulations. Due to strict and effective policy to use cleaner fuels in late 1980s and 1990s, the primary pollutants, such as $SO_2$, CO, and $PM_{10}$ decreased sharply by early 2000s in all parts of Korea. After this period, their concentrations declined with much lower rates in most parts of Korea. In addition, isolated but noticeable numbers of places, especially in major ports, newly developing towns and industrial parks, sustained high levels or even showed further degradation. Despite series of emission control strategies were enforced since early 1990s, $NO_2$ concentrations haven't changed much till 2005, due to significant increase in number of automobiles. Nevertheless, we confirmed that the staggering levels of $NO_2$ and $PM_{10}$ improved evidently after 2005, especially in Seoul Metropolitan Area (SMA), where enhanced regulations for $NO_2$ and $PM_{10}$ emissions was imposed to automobiles and large emission sources. However, their decreasing trends were much lessened in recent years again as current air quality improvement strategies has been challenged to revise further. In contrast to these primary species, annual $O_3$, which is secondary product from $NO_2$ and volatile organic compounds (VOCs), has increased consistently with about 0.6 ppbv per year in every urban part of Korea, while yearly average of daily maximum 8-hour $O_3$ in summer season had a much higher rate of 1.2 ppbv per year. Increase of $O_3$ can be explained mainly by reductions of NO emission. Rising background $O_3$ in the Northeast Asia and increasing oxidizing capacity by changing photochemistry were likely causes of observed $O_3$ increase. The future air quality policy should consider more effective ways to lower alarming level of $O_3$ and $PM_{10}$.