• Journal of environmental and Sanitary engineering
• /
• v.10 no.3
• /
• pp.115-123
• /
• 1995

Most countries have problems regarding the quantity and quality of their fresh water resources, and many countries are suffering from the e(feces of pollution of their inland and coastal waters. Italy is one of the country in which water supply is extremely uneven, and there are wide areas where it represents a real emergencies during periods of drought. All the watershed's water resources, however, are subjected to considerable anthropogenic pressure such as organic load with heavy metals. The high values of organic materials are accounted for mainly by runoff and percolation waste water from urban and agricultural land extensively ma- nured with effluents (rom livestock farming, while high concentration of heavy metals are found in watersheds of national and interregional significance. More than 35% of the underground water bearing strata of certain basins are already contaminated by pollution boih industrial and agricultural pollutants. In these connection, the problems and new measures of water resources in Italy are overviewed.

• Tribology and Lubricants
• /
• v.35 no.2
• /
• pp.132-138
• /
• 2019

In this study, we demonstrate the effects of the acidic properties of montmorillonite (MMT), which is commonly used as a catalyst, on the conversion and selectivity of the dimer acid methyl ester (DAME) synthesis. We synthesize DAME by the dimerization of conjugated linoleic acid methyl ester (CLAME) and oleic acid methyl ester using MMT KSF. Incidentally, trimer acid methyl ester was formed as a by-product during the DAME synthesis. There is a necessity to adequately adjust the strength and quantity of the acid site to control the selectivity of DAME. Therefore, we vary the pH of the MMT acid by using various metal hydroxides. The purpose of this study is to increase the yield of monocyclic dimer acid methyl ester, which is a substance with adequate physical properties for industrial applications (e.g., lubricant and adhesive, etc.), using a heterogeneous catalyst. We report the dimerization of fatty acid methyl ester by using base treated-KSF, and apply it to conjugated soybean oil methyl ester. Then, we transmute the acid site properties of KSF, such as pH of 5 wt.% slurry KSF and various alkali metals (Li, Na, K, Ca). Characterization of base treated-KSF using a pH meter, x-ray diffraction, inductively coupled plasma-atomic emission spectrometer, Brunauer-Emmett-Teller surface analysis, and temperature-programmed desorption. We conduct an analysis of CLAME and DAME using nuclear magnetic resonance spectroscopy, gas chromatography, and gel permeation chromatography. Through these experiments, we demonstrate the effects of the acidic properties of KSF on the conversion and selectivity of the DAME synthesis, and evaluate its industrial potential by application to waste vegetable oil.

• Advances in concrete construction
• /
• v.6 no.5
• /
• pp.545-560
• /
• 2018

The ever-increasing cost of natural sand and the environmental impacts of extracting manufactured sand (quarry sand) calls for exploring the potential to use alternative materials as fine aggregates in concrete. Copper slag and ferrous slag are industrial by products obtained from the smelting process of copper and iron respectively. A large quantity of copper slag and ferrous slag end up being disposed as waste in landfills and this poses a serious threat to the environment. Copper slag and ferrous slag have similar physical and chemical properties as natural sand and also exhibit pozzolanic activity. This paper studies the technical feasibility of industrial by-products such as copper slag and ferrous slag to replace the fine aggregate in concrete by evaluating the workability, strength and durability characteristics of concrete. The test results indicate that the strength properties are not affected by 40% or 100% replacement of quarry sand with iron slag or copper slag. However, 40% replacement of quarry sand with iron slag or copper slag in concrete is recommended considering the durability aspects of concrete.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.2
• /
• pp.120-131
• /
• 2009

Most world-leading companies are aware that Environment and Health and Safety Issues are critical to the product quality and sustainable growth of their company. Environment-friendly efforts are seen in almost all aspects of business operations in an advanced nation. The Extended Producer Responsibility(EPR) and EU Directive on Waste Electric and Electronic Equipment(WEEE) attempt to tackle the growing quantity of WEEE by making producers responsible for the costs of the collection and recycling of their products at the End-of-Life(EOL). To implement the RFID-based integration system for EOL household electric appliances, such as washing machines and refrigerators, we analyzed the process of collecting, recovering, and recycling the EOL products returned from the distribution points. Furthermore, we proposed a soon-to-be process using the RFID-based integration system in the metropolitan recycling center(MRC). This soon-to-be process model is composed of RFID tags, readers, ALEs, applications and several devices. Through the introduction of the RFID-based integration system, we are expecting to see increasing traceability and real-time management for EOL products from customers, and also improvements in valuable reusable materials(VRM) produced from recycling processes.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.76-79
• /
• 2001

In Japan in of today, there is no aspect in which the quantity of waste glass bottle discharged from ordinary homes decreases. Moreover, the kind of shape and color of the waste glass bottles are increasing little by little. In the recycling of the glass bottle, it becomes a problem that many kind of the color is abounding. It is possible to use the transparent glass bottle as raw material of the glassware. Since the reproduction of the color is difficult, the colored glass bottle is not possible to use as a raw material. Therefore, the processing of these glass bottles entirely depends on the reclamation. In Japan, the security of the new reclaimed land is very difficult for the reason of the environmental damage. Moreover, the life expectancy in many reclaimed lands is anticipated with within two years. Therefore, the development of the processing method of glass bottle other than reclamation becomes a rapid problem. At present it is examined that it is used of an aggregate of the colored pavement, as one of the application methods of colored glass bottle. The particle size of produced glass aggregate is also 5mm or less, because the thickness is 5mm or less on almost glass bottles. And almost glass particles have the sharp tip. The application as the aggregate is limited for this sharpness of the particle. This study was carried out for the purpose of the establishment of sharpness measuring method of the glass aggregate particle. It is possible that the injury degree to human in the handling is known, if showing the sharpness of the aggregate particle at the objective numerical value is possible. And the application of the glass aggregate is spread. In this research, the balloon fracture method was used for the sharpness measurement of the glass particle. This method is based on the completely new idea, and it is possible to express completely the possibility of injury to the human. It is reported with the detailed result in full paper, because this study is continuous in order to get the JIS which is industrial standard of Japan.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.50-56
• /
• 2019

This study aims to make artificial stone by recycling blast furnace slag powder, red mud and recycled aggregate, which are known as industrial waste. Recycled aggregate is a typical construction waste, and various recycled products such as concrete block are being sold. In this study, we tried to make artificial stone mixed with waste such as recycled aggregate, and experimented with the use of artificial stone and further study. As the red mud replacement ratio increased, the absorption ratio, fluidity and air content of the matrix were measured to be decreased, and the strength and density were found to increase. The fluidity and absorption ratio decreased with increasing the replacement ratio of recycled aggregate, and the air quantity, rate of aggregate on the surface, density and intensity increased to a certain level. Therefore, this study intends to make artificial stone using recycled resources and conducted basic experiments for further study.

• Advances in environmental research
• /
• v.10 no.1
• /
• pp.87-103
• /
• 2021

Anaerobic digestion (AD) refers to the biological process which can convert organic substrates to biogas in the absence of oxygen. The aim of this study was to determine the capability of feedstock to produce biogas and to quantify the biogas yield from different feedstocks. A co-digestion approach was carried out in a continuous stirred tank reactor operated under mesophilic conditions and at a constant organic loading rate of 0.0756 g COD/ L.day, with a hydraulic retention time of 25 days. For comparison, mono-digestion was also included in the experimental work. 2 L working volumes were used throughout the experimental work. The seed culture was obtained from composting as substrate digestion. When the feedstock was added to seeding, the biogas started to emit after three days of retention time. The highest volume of biogas was observed when the seeding volume used for 1000mL. However, the lowest volume of biogas yield was obtained from both co-digestion reactors, with a value of 340 mL. For methane yield, the highest methane production rate was 0.16 L CH4/mg. The COD with yield was at 8.6% and the lowest was at 0.5%. The highest quantity of methane was obtained from a reactor of Euphorbiaceae peel with added seeding, while the lowest methane yield came from a reactor of Euphorbiaceae stems with added seeding. In this study, sodium bicarbonate (NaHCO3) was used as a buffering solution to correct the pH in the reactor if the reactor condition was found to be in a souring or acidic condition.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3C
• /
• pp.159-165
• /
• 2010

The problems such as natural resource exhaustion, pollutant emission and waste generation are increasing worldwide with the industrial development. The quantity of the industrial by-product in Korea is 6 million tons a year, and even its basic treatment processes including landfill, incineration and storage have reached their limits. In this study, fly ash and silica fume were applied to shotcrete to develop a method for the reuse of resources and to increase the use of fly ash, which is an industrial waste. An environmental hazard evaluation is a must to actively address the worldwide environmental problems, though. Therefore, an environmental impact assessment was conducted using the chemical content analysis test and heavy metal exudation test, for ten mixtures that were obtained through the pre-mixing and compressive strength tests. The results of the compressive strength test showed that all mixtures satisfied national and international standards. Cr, Cd and Hg were not detected, and Pb was detected only in some cases with fly ash. Cu and As were detected in all mixtures, but all of them satisfied national and international standards.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.621-626
• /
• 2021

In this study, data on the study site for apartment construction was acquired, and the quantity of construction waste was calculated using a drone and mobile 3D laser scanner. The accuracy of the drone was 0.034 to 0.064m in the horizontal and vertical directions, respectively, and the mobile 3D Laser Scanner showed an accuracy of 0.018 to 0.049m in the horizontal direction, respectively. These results suggest that it is possible to construct spatial information using a drone and mobile 3D laser scanner with a value within the allowable accuracy of 1:1,000 digital terrain. The volume of construction waste calculated using the mobile 3D laser scanner data was 70,797㎥. It was possible to calculate the volume on the side of the building or some facilities that appeared as shaded areas in the drone outcomes. In addition, modeling was performed for view analysis of the apartments scheduled to be constructed and the terrain-based modeling results of the surrounding buildings. In the future, data construction and accuracy evaluation using mobile 3D laser scanners will be conducted. In addition, additional research comparing existing methods and work processes will be carried out, and the efficiency of mobile 3D laser scanners in the field of spatial information construction can be presented.

• Journal of Environmental Impact Assessment
• /
• v.9 no.3
• /
• pp.163-176
• /
• 2000

The purpose of this study is to analyze the pollutant loads and its distribution, and to suggest the management of nonpoint sources in Daechong Reservoir. The loads from point and nonpoint sources such as population, industry, livestock and land use were calculated per stream or river with topography(1:25,000) of the watershed of Daechong Reservoir. The generating pollutant loads were obtained through multiplication of pollutant sources by generating pollutant quantity per unit pollutant source. The effluent point sources loads is defined as loads from wastewater treatment facilities such as domestic, industrial and livestock wastewater treatment facilities, which were calculated through multiplication of effluent flowrates by water quality constituents concentration. Untreated point sources loads were estimated to be 35 % of total point sources loads. The effluent nonpoint sources pollutant loads were obtained through the multiplication of generating nonpoint sources loads by effluent ratios based on previous studies. The effluent nonpoint sources loads have the ratio of 26.2% of total BOD effluent loadings, 20.1% of total T-N effluent loadings, and 10.5% of total T-P effluent loadings. For the reduction of nonpoint sources loads in Daechong Reservoir, silviculture, artificial wet land, and grassed waterways could be applied. And untreated livestock waste scattered can result in nonpoint loadings, so required the livestock wastes treatment facilities and purifying facilities together with the management of shed, pasture, livestock waste storage site and composting site. Finally, remote sensing and GIS should be applied to the identification of distribution of water quality, watershed, the location and scale of nonpoint sources, effluent process during rainfall, for more detailed analysis of nonpoint sources.