• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3327-3333
• /
• 2011

The interest on the recovery of thermal energy using the industrial waste has been rising to solve the problems of continuous increase of waste generation and the depletion of the fossil fuel recently. To recovery from the waste among the new recyclable energies has been proved as the most favorable when the potential value of energy source is compared. The RDF made from the industrial waste has been approved as the most economical method. This research has analyzed the heavy metal components containing in the industrial waste. The concentration of Cl and S in the industrial waste generated in C-industrial complex are slightly high than that of the B- and A-industrial complex. The main components generated from A-industrial complex, B-industrial complex, and C-industrial complex are alumina-silicates, calcium alumina silicates, and the mixture of lime and calcium alumina silicate. These results could be used to reveal the origin of inorganic components in industrial waste and utilized as a basic data to improve the performance of the RDF as fuel.

• International Journal of Concrete Structures and Materials
• /
• v.18 no.2E
• /
• pp.125-132
• /
• 2006

Waste glass has been increasingly used in industrial applications. One shortcoming in the utilization of waste glass for concrete production is that it can cause the concrete to be weakened and cracked due to its expansion by alkali-silica reaction(ASR). This study analyzed the ASR expansion and strength properties of concrete in terms of waste glass color(amber and emerald-green), and industrial by-products(ground granulated blast-furnace slag, fly ash). Specifically, the role of industrial by-products content in reducing the ASR expansion caused by waste glass was analyzed in detail. In addition, the feasibility of using ground glass for its pozzolanic property was also analyzed. The research result revealed that the pessimum size for waste glass was $2.5{\sim}1.2mm$ regardless of the color of waste glass. Moreover, it was found that the smaller the waste glass is than the size of $2.5{\sim}1.2mm$, the less expansion of ASR was. Additionally, the use of waste glass in combination with industrial by-products had an effect of reducing the expansion and strength loss caused by ASR between the alkali in the cement paste and the silica in the waste glass. Finally, ground glass less than 0.075 mm was deemed to be applicable as a pozzolanic material.

• Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.46-54
• /
• 2007

Concentrations of the principal volatile organic compounds, such as benzene, toluene, ethylbenzene, m,p,o-xylene, styrene, and chlorobenzene were measured at the solid waste treatment plants classified into four categories; municipal waste incinerator, municipal waste landfill site, industrial waste incinerator and industrial waste landfill site. The average concentration of VOCs in industrial waste treatment facilities was 33.43 ppb and was significantly higher than that measured at municipal waste treatment facilities (4.71 ppb). The average toluene concentrations measured at incinerators (13.05 ppb) were a little higher than those measured at landfill sites (11.54 ppb). The contribution of the waste treatment facilities to the concentration of benzene (0.35 ppb) and o-xylene (0.15 ppb) in the industrial area was relatively small. However, toluene measured in the industrial waste treatment facilities was the most abundant VOCs with the average concentration of 21.37 ppb. As a result of analyses of fingerprint, in cases of IISH and ILUS, a variety of compounds other than major VOCs were detected in high level. On the Pearson correlation analysis, the correlation was generally positive and some pairs of these VOCs were very strongly correlated (correlation coefficient > 0.75).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.107-108
• /
• 2022

This study aims to solve environmental problems by reducing complex degradation and recycling industrial waste by utilizing waste fibers and blast furnace slags, which are industrial by-products. In addition, it is intended to secure long-term durability to reduce cracks. To this end, the disadvantages of fiber-reinforced concrete are to solve the problem of lowering liquidity and ensuring curing time, and to find the optimal combination when waste fibers and blast furnace slag are used together.

• Journal of the Korean Society of Combustion
• /
• v.7 no.2
• /
• pp.42-48
• /
• 2002

Experiments on burning process of the industrial wastes were performed on a nozzle-type grate in the industrial waste incinerator with a capacity of 160 kilograms per hour. The temporal variations of temperatures and concentrations of the exhaust gas were measured and analyzed. The synthetic leather waste with the moisture content less than 2% was used. The experimental results show that the CO concentration in the exhaust gas exceeds the limit, 600 ppm, and the gas temperature fluctuates too much when 8 kg of waste was supplied every 3 minutes, equivalent to the capacity of 160kg per hour. That is a typical burning mode of this high-calorific industrial waste. When the smaller unit waste input, 6kg per every 2 min 15 seconds was supplied, we could reduce the fluctuations of the furnace temperature and improve the exhaust emissions, especially the CO concentration.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.71-75
• /
• 2006

Problem of the environmental pollution and pollution by vast quantity occurrence of industrial waste by progress of industry is risen recently. Is real condition that waste foundry sand to be industrial waste that happen in casting industry of them has much the occurrence amount and the processing method is depending on most simplicity reclamation and so on. Therefore, by using waste foundry sand in the world by fine aggregate for mortar in recycling side of industrial waste necessity of development for new principal parts aggregate is risen along with rise of aggregate price by exhaustion phenomenon of natrual resources, wish to analyze physical and mechanical properties special quality and foretell practical use possibility availability.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.179-182
• /
• 2002

Today, augmentation of industrial wastes with industrial development demands diminution and recycling technical development for industrial wastes reduction. A statistical research of industry and constructional wastes as a request of the times can achieve the conservation of resource and the protection of environment. The ultimate object of the study is not only diminution and recycling of industrial wastes but also the degree of self-sufficiency in resource and the attainment of comfortable life environment, which can the accomplish the resource circulation system and make progress into the environmentally advanced country. The object of this investigation is industrial classification, a waste discharge quantity, a waste sort, waste disposal of industrial wastes in Yeung-nam area. The investigation of special quality in industrial wastes can be used to establish a wastes management policy and a disposition method .

• Journal of Industrial Technology
• /
• v.38 no.1
• /
• pp.9-13
• /
• 2018

FRP(Fiber Reinforced Plastic) ships are easy to manufacture and repair. Also they are more durable and cheaper than steel wires and neck lines. Therefore FRP ships are widely used in small ships. In Korea, the amount of waste FRP ships is increasing. It is expected that a large amount of waste FRP ships will be generated. Waste FRP ships are emerging as a social problem, such as the difficulty in preserving the marine environment. To improve this, a waste FRP ship melting process system has been developed. In order to construct an effective waste FRP ship processing system, it is necessary to study the treatment facilities location problem. In this paper, we suggest mathematical model to solve optimal location problem of waste FRP Ships and discuss on results by applying it to nine regions selected as candidates for treatment facilities.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.242-247
• /
• 1999

The characteristics of waste heat effluents from 11 industrial complexes of 7 areas were analyzed to investigate the possibility of waste heat recovery of huge amount of waste heat producing from various industrial complexes. This study presents a part of the research work for the industrial waste heat for development of energy integrated network system in broad city area, which will utilize industrial waste heat for residential and commercial areas, where they are located at some distances from the complexes. The amount of waste heat from the investigated complexes was detected as 148,913 TOE/year. However, It was analyzed 83% of the waste heat was analyzed the temperature range from 0$^{\circ}C$ to 200$^{\circ}C$. Also, it was evaluated that 82% of waste heat was exhausted by flue gases. Especially, the characteristics of waste heat for the areas where most heat concentrated, such as Tae-gu industrial complex, Ul-san petrochemitry complex, Yio-chun petrochemistry complex, and Chun-ju industrial complex were investigated more precisely. Total amount of waste heat discharged from these four areas were analyzed 114,402 TOE/year, which was occupied as 77% of the total waste heat for the studied areas, and 87% of the waste heat from the industries was exhausted by flue gaseous phase and temperature range was from 0$^{\circ}C$ to 200$^{\circ}C$ 18.1 million TOE/year waste heat was released from the fossil fuel power plants, however 95% of waste heat was analyzed as cooling water from surface condensers at power plants. The temperature range was measured from 27$^{\circ}C$ to 34$^{\circ}C$, which are unable to utilize due to its low temperature. Otherwise, 5% (894,800 TOE/year) waste heat released from power plants were observed as flue gas, which temperature ranged from 90$^{\circ}C$ to 170$^{\circ}C$.

• Environmental Engineering Research
• /
• v.22 no.3
• /
• pp.266-276
• /
• 2017

A life cycle impact assessment was applied in an industrial waste incineration plant to evaluate the direct and indirect environmental impacts based on toxicity and non-toxicity categories. The detailed life cycle inventory of material and energy inputs and emission outputs was compiled based on the realistic data collected from a local industrial waste incineration plant, and the Korean life cycle inventory and ecoinvent database. The functional unit was the treatment of 1 tonne of industrial waste by incineration and the system boundary included the incineration plant and landfilling of ash. The result on the variation of the impact by the unit processes showed that the direct impact was decreased by 79.3, 71.6, and 90.1% for the processes in a semi dry reactor, bag filter, and wet scrubber, respectively. Considering the final impact produced from stack, the toxicity categories comprised 91.7% of the total impact. Among the toxicity impact categories, the impact in the eco-toxicity category was most significant. A separate estimation of the impact due to direct and indirect emissions showed that the direct impact was 97.7% of the total impact. The steam recovered from the waste heat of the incineration plant resulted in a negative environmental burden.