• 제목/요약/키워드: Industrial regions

검색결과 1,012건 처리시간 0.031초

고령화율에 따른 농촌지역 산업구조 변화 분석 (Analysis of Changes in the Industrial Structure by the Ageing Rate in Korea)

  • 권영현;김의준
    • 농촌계획
    • /
    • 제20권4호
    • /
    • pp.183-192
    • /
    • 2014
  • The purpose of this study is to examine the effect of regional ageing rate to industrial structures of rural areas in Korea. This paper shows that there are cause-effect relations between the industrial specialization and ageing rate in 'Agriculture', 'Finance & Insurance', and 'Real Estate & Leasing' sectors. The ageing levels are classified into ageing society, aged society, and super-aged society according to UN standard that cause different impacts on industrial specialization of regions. This paper finds that the industrial specialization is determined by the ageing levels. If there is an increase in ageing rate by 1% in ageing society, the industrial specialization of the three industries could be strengthened by 0.14%. But, ageing rates have negative impacts on the industrial specialization in aged society and super-aged society by 0.76% and by 1.20%, respectively, as increasing ageing rate by 1%. As the ageing rate progresses, 'Agriculture', 'Finance & Insurance' and 'Real Estate & Leasing'sectors have positive impacts on the industrial specialization in the ageing society. But 'Finance & Insurance' and 'Real Estate & Leasing' sectors have changed into negative impacts on the industrial specialization in the aged society. In the aged society, the employment of elderly persons of 'Agriculture' and 'Finance & Insurance' sectors increase by 1% makes positive impact on the industrial specialization by 1.54%, by 0.45%, respectively. The result of this paper can be applied to a significant guideline at establishing regional employment planning such as elderly customized employment, vocational training for rural areas, where above 14% of ageing rate.

WASP 모의를 이용한 하천 수계 중금속 위해성평가 방법 (Quantitative Risk Assessment Method for Metals in Water Body using WASP)

  • 신유리;윤춘경;전나정;이한필
    • 한국물환경학회지
    • /
    • 제26권4호
    • /
    • pp.629-636
    • /
    • 2010
  • According to the spatial movements of the Nak-dong river watershed, the changes in heavy metal concentrations were simulated by WASP7.3. The risk assessment was performed using the predicted data of WASP7.3. The target heavy metal was manganese (Mn). In the simulated manganese data of WASP7.3, the average concentration by regions was from 0.03 mg/L to 0.07 mg/L. It is lower than drinking water standard in korea. The risk assessment was presented that it was high at the junction of Nak-dong river and Kumho river. It was influenced by the discharge of industrial complexes and large cities which were located in the junction. In comparison of drinking water standard and predicted data of WASP7.3 risk assessment, whole watershed was also low level at predicted data. However, to keep the similar risk value ($10^{-7}$) in adults and children anywhere, it requires the additional treatment of the point source discharges. It was also reflected by regions. Through this study, it was possible to evaluate heavy metal influence in unattainable monitoring regions and to estimate heavy metal addition and reduction by locations. Therefore, the outcomes of WASP7.3 can connect with the risk assessment and it can evaluate the safety of human by regions.

부산지역 미세먼지에 대한 건강 취약성 평가 (Health Vulnerability Assessment for PM10 in Busan)

  • 이원정;황미경;김유근
    • 한국환경보건학회지
    • /
    • 제40권5호
    • /
    • pp.355-366
    • /
    • 2014
  • Objectives: This study seeks to evaluate the vulnerability assessment of the human health sector for $PM_{10}$, which is reflected in the regional characteristics and related disease mortality rates for $PM_{10}$ in Busan over the period of 2006-2010. Methods: According to the vulnerability concept suggested by the Intergovernmental Panel on Climate Change (IPCC), vulnerability to $PM_{10}$ is comprised of the categories of exposure, sensitivity, and adaptive capacity. The indexes of the exposure and sensitivity categories indicate positive effects, while the adaptive capacity index indicates a negative effect on vulnerability to $PM_{10}$. Variables of each category were standardized by the rescaling method, and each regional relative vulnerability was computed through the vulnerability index calculation formula. Results: The regions with a high exposure index are Jung-Gu (transportation region) and Saha-Gu (industrial region). Major factors determining the exposure index are the $PM_{10}$ concentration, days of $PM_{10}{\geq}50$, ${\mu}g/m^3$, and $PM_{10}$ emissions. The regions that show a high sensitivity index are urban and rural regions; these commonly have a high mortality rate for related disease and vulnerable populations. The regions that have a high adaptive capacity index are Jung-Gu, Gangseo-Gu, and Busanjin-Gu, all of which have a high level of economic/welfare/health care factors. The high-vulnerability synthesis of the exposure, sensitivity, and adaptive capacity indexes show that Dong-Gu and Seo-Gu have a risk for $PM_{10}$ potential effects and a low adaptive capacity. Conclusions: This study presents the vulnerability index to $PM_{10}$ through a relative comparison using quantitative evaluation to draw regional priorities. Therefore, it provides basic data to reflect environmental health influences in favor of an adaptive policy limiting damage to human health caused by vulnerability to $PM_{10}$.

지역별 프리쿨링 시스템의 에너지 절감 분석 (Analysis of Energy Reduction of Free Cooling System with Regions of South Korea)

  • 윤정인;손창효;최광환;백승문;허정호;김영민
    • 한국태양에너지학회 논문집
    • /
    • 제34권3호
    • /
    • pp.82-88
    • /
    • 2014
  • Using low outdoor temperature, free cooling system is used in a data center or industrial air-conditioning for energy saving. Because use of IT equipment has increased in some office building recently, there is a growing trend towards using free cooing system. Free cooling system performance is influenced by outdoor temperature. Therefore the performance is different with regions. In this study, performance characteristic of free cooling system is analysed and energy reduction is compared with some regions. Selected regions are 4 cities; including Ulsan analyzed in preceding research, Seoul, ChunCheon and Daejeon. The Aspentech software HYSYS 8.0v was used to conduct the analysis of free cooling system based on temperature per hour of 4 cities in 2013, respectively. The main result is following as. Free cooing system in this study has energy saving effect when outdoor temperature below $7^{\circ}C$. Becuase temperature of Chuncheon is relatively low, using free cooling system can conserve most air-conditioning energy. Energy reduction amount of Seoul is 11%, Chuncheon is 17.5%, Deajeon is 15%, Ulsan is 14%. In case of large scale of air-conditioning, it is reasonable to use free cooling system although the system is used in Seoul.

해양플랜트용 후판강의 FCAW HAZ 미세조직과 샤르피 충격 특성의 상관관계 (Correlation between Microstructure and Charpy Impact Properties of FCAW HAZ of Thick Steel Plates for Offshore Platforms)

  • 이훈;이현욱;조성규;최동기;김형찬;권용재;이정구;신상용
    • 한국재료학회지
    • /
    • 제29권8호
    • /
    • pp.497-504
    • /
    • 2019
  • In this study, the correlation between microstructure and Charpy impact properties of FCAW(Flux cored arc welding) HAZ(Heat affected zone) of thick steel plates for offshore platforms was investigated. The 1/4 thickness(1/4t) location HAZ specimen had a higher volume fraction of bainite and finer grain size of acicular ferrite than those of the 1/2 thickness (1/2t) location HAZ specimen because of the post heat effect during the continuous FCAW process. The Charpy impact energy at $-20^{\circ}C$ of the 1/4t location HAZ specimen was lower than that of the 1/2t location HAZ specimen because of the high volume fraction of coarse bainite. The Charpy impact energy at -40 and $-60^{\circ}C$ of the 1/2t location HAZ specimen were higher than those of the 1/2t location HAZ specimen because the ductile fracture occurred in the fine acicular ferrite and martensite regions. In the ductile fracture mode, the deformed regions were observed in fine acicular ferrite and martensite regions. In the brittle fracture mode, long crack propagation path was observed in bainite regions.

한국의 IFDI유입이 지역성장에 미치는 영향에 관한 실증연구 (An Empirical Study on the Effect of IFDI on the Regional Growth in Korea)

  • 최원석;홍승린
    • 무역학회지
    • /
    • 제42권1호
    • /
    • pp.217-236
    • /
    • 2017
  • 본 연구는 2000~2014년 기간 동안 한국의 16개 지역에 유입된 IFDI가 지역성장에 미치는 영향을 동태적 패널모형인 시스템 GMM을 적용하여 분석하였다. 분석결과, 한국에 유입된 IFDI는 지역 내 경제성장 즉 자본형성, 고용창출, 수출확대 등에서 정(+)의 효과가 나타났으나, 수입은 부(-)의 효과가 발생하였다. 반면, 인적자본은 정(+)의 효과를 보였으나 통계적으로 유의하지 않았다. 한편 권역별로 유입된 IFDI의 성장효과를 살펴보면, 수도권과 동남권은 GRDP의 성장에 부(-)의 효과를 보인 반면, 대경권에서는 정(+)의 효과를 보였다. IFDI유입과 인적자본 간 보완관계에서도 유사하게 나타났다. 본 연구는 한국에 유입된 IFDI가 지역성장에 중요한 요인이지만, 지역 내 GRDP에 미치는 성장효과는 지역특성에 따라 차이가 존재한다는 것을 확인하였다. 따라서 지역 내 유입된 IFDI의 성장효과를 확대하기 위해서는 지역특성에 맞는 IFDI유치전략과 함께 산업구조개편이 시급하다고 판단된다.

  • PDF

Microstructure and Mechanical Properties of AA6061/AA5052/AA1050 Alloy Fabricated by Cold Roll-Bonding and Subsequently Annealed

  • Seong-Hee Lee;Sang-Hyeon Jo;Jae-Yeol Jeon
    • 한국재료학회지
    • /
    • 제33권11호
    • /
    • pp.439-446
    • /
    • 2023
  • Changes in the microstructure and mechanical properties of as-roll-bonded AA6061/AA5052/AA1050 three-layered sheet with increasing annealing temperature were investigated in detail. The commercial AA6061, AA5052 and AA1050 sheets with 2 mm thickness were roll-bonded by multi-pass rolling at ambient temperature. The roll-bonded Al sheets were then annealed for 1 h at various temperatures from 200 to 400 ℃. The specimens annealed up to 250 ℃ showed a typical deformation structure where the grains are elongated in the rolling direction in all regions. However, after annealing at 300 ℃, while AA6061 and AA1050 regions still retained the deformation structure, but AA5052 region changed into complete recrystallization. For all the annealed materials, the fraction of high angle grain boundaries was lower than that of low angle grain boundaries. In addition, while the rolling texture of the {110}<112> and {123}<634> components strongly developed in the AA6061 and AA1050 regions, in the AA5052 region the recrystallization texture of the {100}<001> component developed. After annealing at 350 ℃ the recrystallization texture developed in all regions. The as-rolled material exhibited a relatively high tensile strength of 282 MPa and elongation of 18 %. However, the tensile strength decreased and the elongation increased gradually with the increase in annealing temperature. The changes in mechanical properties with increasing annealing temperature were compared with those of other three-layered Al sheets fabricated in previous studies.

Mitochondrial COI sequence-based population genetic analysis of the grasshopper, Patanga japonica Bolívar, 1898 (Acrididae: Orthoptera), which is a climate-sensitive indicator species in South Korea

  • Jee-Young Pyo;Jeong Sun Park;Seung Hyun Lee;Sung-Soo Kim;Heon Cheon Jeong;Iksoo Kim
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제47권2호
    • /
    • pp.99-114
    • /
    • 2023
  • Patanga japonica Bolívar, 1898 (Orthoptera: Acrididae) is listed as a climate-sensitive indicator species in South Korea and is called southern group of insects in that the main distributional range is southern region of South Korea and Asian continent. In South Korea, thus, the species was distributed mainly in southern region of South Korea including southward a remote Jeju Island, but recently the species has often been detected in mid to northern region of South Korea, implying northward range expansion in response to climate change. Understanding the characteristics of the changes in genetic diversity during range expansion in response to climate change could be a foundation for the understanding of future biodiversity. Thus, in this study, we attempted to understand the changing pattern of the genetic diversity of the P. japonica in newly expanded regions. For the purpose of study, we collected 125 individuals from seven localities throughout South Korea including two newly distributed regions (Pyeongtaek and Yeongwol at ~37° N). These were sequenced for a segment of mitochondrial cytochrome oxidase subunit I (COI) and analyzed for genetic diversity, haplotype frequency, and population genetic structure among populations. Interestingly, northward range expansion accompanied only haplotypes, which are most abundant in the core populations, providing a significant reduction in haplotype diversity, compared to other populations. Moreover, genetic diversity was still lower in the expanded regions, but no genetic isolation was detected. These results suggest that further longer time would take to reach to the comparable genetic diversity of preexisting populations in the expanded regions. Probably, availability of qualified habitats at the newly expanded region could be pivotal for successful northward range expansion in response to climate change.

화학사고 대응계획: 국내 지역간 비교연구 (Chemical Accident Response Plan: A Comparative Study between Regions in Korea)

  • 최민제;조규선
    • 산업진흥연구
    • /
    • 제9권1호
    • /
    • pp.57-64
    • /
    • 2024
  • 2015년 화학물질관리법 전면 개정에 따라 국내 유해화학물질 관리 패러다임이 사업장 단위에서 지역 단위로 변화하였다. 이에 2020년 지역화학사고대응계획이 수립되었으나 지자체마다 대응 범위와 기준에 대한 내용에서 조금씩 차이를 보이고 있다. 이에 본 연구는 각 지역내 수립된 화학사고대응계획을 비교 고찰함으로써 효과적인 화학사고 대응계획에 대한 시사점을 제공하고자 연구를 수행하였다. 이에 공개된 자료를 기반으로 시 단위 4개 지역의 사고 대비 현황, 화학사고 대응시스템, 주민 대피 대응 및 교육훈련의 3가지 차원에서 지역별 대응계획을 비교 분석하였다. 연구 결과, 지역별 사고 대비 및 사고 대응시스템에서는 차이가 크지 않으며, 각 지역별 사업장 특성에 연계한 대비체계는 논의가 부족했다. 또한, 주민을 위한 교육 및 훈련에서 지역간 차이가 존재했다. 앞으로 각 지자체는 지역 환경 특성에 맞는 대응 조직을 구성하고, 유관 기관 협력을 통해 민첩하고 효과적인 사고 대응을 위해 전략을 구상해야 할 것이다.

Composition of Federal R&D Spending, and Regional Economy : The Case of the U.S.A

  • Lee, Si-Kyoung
    • 지역연구
    • /
    • 제9권1호
    • /
    • pp.65-78
    • /
    • 1993
  • In this study, the significant and enduring concentration of federal R&D spending in metro-scale clusters across the nation is treated as evidence of the operation of a distinct industrial infrastructure defined by the ability of R&D performers to attract external funding and pursue the sophisticated project work demanded. It follows, then, that the agglomerative potential of these R&D concentrations -- performers and their support infrastructures -- requires a search for economic impacts guided by a different stimulative effects attributable to federal R&D spending may be that substantial subnational economic impacts are routinely obscured and diluted by research designs that seek to discover impacts either at the level of nation-scale economic aggregates or on firms or specific industries organized spatially. Therefore, this study proceeds by seeking to link the locational clustering of federal contract R&D spending to more localized economic impacts. It tests a series of models(X-IV) designed to trace federal contract R&D spending flows to economic impacts registered at the level of metro-regional economies. By shifting the focus from funding sources to recipient types and then to sector-specific impacts, the patterns of consistent results become increasingly compelling. In general, these results indicated that federal R&D spending does indeed nurture the development of an important nation-spanning advanced industrial production and R&D infrastructure anchored primarily by two dozed or so metro-regions. However, dominated as it is by a strong defense-industrial orientation, federal contract R&D spending would appear to constitute a relatively inefficient national economic development policy, at least as registered on conventional indicators. Federal contract R&D destined for the support of nondefense/civilian(Model I), nonprofit(Model II), and educational/research(Mode III) R&D agendas is associated with substantially greater regional employment and income impacts than is R&D funding disbursed by the Department of Defense. While federal R&D support from DOD(Model I) and for-profit(Model II) and industrial performer(Model III) contract R&D agendas are associated with positive regional economic impacts, they are substantially smaller than those associated with performers operating outside the defense industrial base. Moreover, evidence that the large-business sector mediates a small business sector(Model VI) justifies closer scrutiny of the relative contribution to economic growth and development made by these two sectors, as well as of the primacy typically accorded employment change as a conventional economic performance indicator. Ultimately, those regions receiving federal R&D spending have experienced measurable employment and income gains as a result. However, whether or not those gains could be improved by changing the composition -- and therefore the primary missions -- of federal R&D spending cannot be decided by merely citing evidence of its economic impacts of the kind reported here. Rather, that decision turns on a prior public choice relating to the trade-offs deemed acceptable between conventional employment and income gains, the strength of a nation's industrial base not reflected in such indicators, and the reigning conception of what constitutes national security -- military might or a competitive civilian economy.

  • PDF