• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1635-1637
• /
• 1998

This paper describes on the basic study for the insulation design of vacuum interrupter using Finite Element Method. For the basic study of insulation design, first, the maximum electric field was calculated on each curvature radius of arc shield and electrode. Second, the maximum electric field was also calculated on applied voltage and end shield with or not. Thus, the maximum electric field calculated have an effect on curvature radius and voltage polarity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.207-208
• /
• 2007

Epoxy resin insulators show a lot of advantages for electrical power apparatus. Because epoxy resin provide electrical and mechanical characteristic which is excellent, it is desirable to apply epoxy resin as a spacer and post insulation in Gas Insulated Switchgear (GIS). In this study, we have investigated the influence of surface electric field attached particle contaminated spacer surfaces under SF6 gas. Also, we performed analysis of electric field. As a result, when the particle was attached on spacer, we found out a surface electric field of characteristics.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.1
• /
• pp.52-60
• /
• 2007

Estimating parameters of the lifetime distribution is investigated when field failure data are not completelyreported. To take into account the reality and the accuracy of the estimates in such a case, the failure reportingprobability is incorporated in estimating parameters, Firstly, method of maximum likelihood estimate (MLE) isused to estimate parameters of the lifetime distribution when failure reporting probability is known, Secondly,Expectation and Maximization (EM) algorithm is used to estimate the failure reporting probability and parame-ters of the lifetime distribution simultaneously when failure reporting probability is unknown. For both cases,procedures of estimation are illustrated for single Weibull distribution and mixed Weibull distribution. Simula-tion results show that MLE obtained by the proposed method is more accurate than the conventional MLE.

• Industrial Engineering and Management Systems
• /
• v.15 no.2
• /
• pp.148-155
• /
• 2016

Existing power plants may consume significant amounts of fuel and require high operating costs, partly because of poor electrical power output estimates. This paper suggests a continuous conditional random field (C-CRF) model to predict more precisely the full-load electrical power output of a base load operated combined cycle power plant. We introduce three feature functions to model association potential and one feature function to model interaction potential. Together, these functions compose the C-CRF model, and the model is transformed into a multivariate Gaussian distribution with which the operation parameters can be modeled more efficiently. The performance of our model in estimating power output was evaluated by means of a real dataset and our model outperformed existing methods. Moreover, our model can be used to estimate confidence intervals of the predicted output and calculate several probabilities.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.1
• /
• pp.10-16
• /
• 2015

In this study, we suggest a method to predict probability distribution of a new customer's degree of loyalty using C-CRF that reflects the RFM score and similarity to the neighbors of the customer. An RFM score prediction model is introduced to construct the first feature function of C-CRF. Integrating demographical similarity, purchasing characteristic similarity and purchase history similarity, we make a unified similarity variable to configure the second feature function of C-CRF. Then parameters of each feature function are estimated and we train our C-CRF model by training data set and suggest a probabilistic distribution to estimate a new customer's degree of loyalty. An example is provided to illustrate our model.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.672-674
• /
• 2001

Axial magnetic field(AMF) type electrode can increase the interrupting capability of vacuum interrupters. But, this interrupting capability vary with design parameters such as shape of electrode, slits of contact, material of contact and so on. In this paper, shown arc characteristics of unipolar axial magnetic field type electrode for vacuum interrupter by design parameters such as shape of contact slits and diameter of contact. And, confirmed vacuum arc configuration by individual design parameter using high speed camera.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2641-2643
• /
• 1999

This paper describes the first field demonstration of the distribution STATCON in Korea including installation and its evaluation for improving power quality in distribution system. The purpose of installation is to verify functionally the voltage source inverter based equipment for voltage regulation and harmonic mitigation in distribution line. The operational data resulting from field test and the site figure are included.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.852-857
• /
• 2006

This paper presents a precision method to calculate the electric field density of mountain area using digital terrain elevation data(DTED). Generally we calculate the electric field density of a point adding a direct field density and horizontal reflection field density between two points. In this paper, we consider a vertical reflection field density from vertical surface near the wave propagation line between transmitter and receiver. The vertical reflection electric field have different propagation path and polarization from a horizontal reflection field. And the total electric field density adding horizontal field density and vertical reflection value is more accurate than a direct path electrical field density or direct field density adding a horizontal reflection field density.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.729-738
• /
• 2021

The purpose of this study was to suggest an improvement plan ultimately to develop practical evaluation methods for national technical qualifications in the field of seeds and horticulture based on the National Competency Standards. Through this, national technical qualifications can be strengthened in terms of professionalism in the seeds and horticulture field. In order to conduct this study, the national technical qualification currently in use was matched to certain competency units and competency unit elements of National Competency Standards. We then visited an industrial site to understand the practical factors related to the technical, facility and equipment aspects of the seeds and horticulture industrial field, after which a practical evaluation exam was developed. Also, for a feasibility study, a pilot test assessment was conducted for students majoring in seeds and horticulture, with a survey also conducted with field experts and an advisory committee consisting of experts in seeds and horticulture. Based on the results, by suggesting an improvement plan for a practical evaluation method leading to better national technical qualifications in the field of seeds and horticulture, it was shown to be possible to improve knowledge, technical, and literacy aspects. This can lead to the training of outstanding technical professionals. Ultimately, the results here are expected to contribute to the improvement of the seeds and horticulture industry.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.3
• /
• pp.1311-1320
• /
• 2016

The fourth industrial revolution is currently proceeding and is expected to significantly affect the way individuals live and in result change the society in various aspects. The ICT-based convergence industries of the fourth industrial revolution contain various fields such as driverless cars, lighter and tougher materials, robotics, 3D printing and even biotechnology. This paper examines the researches done in fourth industrial revolution field based on the articles submitted to APIC-IST 2015. The topics from articles related to the fourth industrial revolution were categorized based on the keyword frequency of main issues. Results suggested that IoT and Wireless sensor network related researches were among the fields that the most researches were done in it and topics like nanotechnology, biotechnology, driverless cars, sharing economy and 3D printing were not mentioned at all. This paper also suggests necessary contents in the fourth industrial revolution to be focused on for further research in this field.