• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.81-89
• /
• 2002

The Battery Energy Storage System (BESS) has lots of advantages such as load leveling, quick response emergency power (spinning reserve), frequency and voltage control, improvement of reliability, and deferred generation and transmission construction. However, it is very critical that economic feasibility requires justification from the customer side of meter to promoting the dissemination of BESS in nation widely. In this paper, we proposed the economic assessment model of customer owned BESS which is complemented and improved the existing model. The proposed model is applied to the typical customer types, i.e. light industrial, commercial, and residential, which are taken from the statistical analysis on the load profile survey of Korea Electric Power COmpany (KEPCO). The economic viability performed for each customer load type to justifying their economic feasibility of BESS installation from the economic measures such as payback period, Net Present Worth (NPW), Rate Of Return (ROR). The results show that the BESS has economic benefits to the specific customer type, i.e. residential customer. Therefore, the government and the energy agency should be committing the support program, such as tax incentive, financial support, to disseminate the BESS nation widely. The results of this paper are useful to the customer investment decision-making and the national energy policy & strategy in Korea.

• Journal of Convergence Society for SMB
• /
• v.2 no.1
• /
• pp.51-58
• /
• 2012

Android platform is a powerful operating system developed on Linux 2.6 Kernel, and provides many features such as comprehensive libraries, a multimedia environment, and powerful interface for phone applications. Since Android is an open operating system, which can be installed in any vendors's equipments. Current smartphones as well as netbooks, navigations, car PCs, tablet PCs, Industrial PCs are used in various fields. It is difficult a lot that to mount to other devices on the Android platform or new devices. In this Paper, The process that data that occurred from a hardware was passed to the highest application and Android platform system for managing hardware devices were analyzed. Building Android & driver compilation environment, How to support the protocol for the use of WiFi in the kernel, How to Mount a WiFi device in the kernel, Device driver registration for the Android platform, WiFi Management Service Daemon (wpa_supplicant) and IP allocation services daemon (dhcpcd) registration, How to create a socket for communication between the daemon (wpa_supplicant) and HAL have been presented. In the experiment using the proposed method, WiFi devices were mounted on the Android platform in the X-86 & ARM family. Understanding the whole process of control flow in Android hierarchy is very important to porting a new device on it. The process included in this paper can help technicians who might encounter the obstacles in their porting works.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2006.05a
• /
• pp.412-419
• /
• 2006

An Experimental study was conducted on $CO_{2}$ recycle combustion heating system using pure oxygen instead of conventional air as an oxidant, which is thereby producing a flue gas of mostly $CO_{2}$ and water vapor($H_{2}O$ and water vapor($H_{2}O$) and resulting in higher $CO_{2}$ concentration. The advantages of the system are not only the ability to control high temperatures characteristic of oxygen combustion with recycling $CO_{2}$ but also the possibility to reduce NOx emission in the flue gas. A small scale industrial reheating furnace simulator and specially designed variable flame burner were used to characterize the $CO_{2}$ recycle oxy-fuel combustion, such as the variations of furnace pressure, temperature and composition in the flue gas during recycle. It was found that $CO_{2}$ concentration in the flue gas was about 80% without $CO_{2}$recycle. The furnace temperature and pressure and pressure were decreased due to recycle and the NOx emission was also reduced to maintain under 100ppm.

• Journal of Food Hygiene and Safety
• /
• v.22 no.1
• /
• pp.63-75
• /
• 2007

A survey on sanitary management at 98 food service institutions located in Jeollabuk-Do were conducted. Food service institutions included 13 hospitals, 38 schools, 40 enterprises, and 7 others. The sterilization in boiling water was used for disinfection of tableware, spoon and chopsticks, and dish towel. Cooking kit, refrigerator, chopping board, and knife were sterilized with disinfectant. Frequency of sanitary training program on employees was 56.1% for 1 time/month, 12.2% for 2-3 times/month, and 11.3% for 1 time/week. Preparing ratio of defrosting, warehouse and rest room, and washing and sterilization diary were 73.8, 60.5, and 54.5%, respectively. However, checking ratio of environments (9.5%), personal sanitation (10.8%), and sanitary training program diary(8.4%) were low. Major obstacle factors on the introduction of Hazard analysis critical control point (HACCP) system into food service institutions were lack of equipment and facilities (54.1%) and lack of understanding and data on HACCP system (17.3%). Therefore, in order to reduce the outbreak of food-borne diseases increasing frequency, we estimated that the introduction of sanitary management system and the conversion of dietician' perception on sanitary managements in food service institutions were needed.

• Korean Journal of Optics and Photonics
• /
• v.27 no.3
• /
• pp.106-113
• /
• 2016

In this paper, we deal with the wavefront compensation capability of a silicon carbide (SiC) deformable mirror (DM) with 37 actuators for adaptive optics. The wavefront compensation capability of the SiC DM is predicted by computer simulation and examined by actual experiments with a closed-loop adaptive optics system consistsing of a light source, a phase plate, a SiC DM, a high speed Shack-Hartmann sensor, and a control computer. Distortion of wavefront is caused by the phase plate in the closed-loop adaptive optics system. The distorted wavefront has a peak-to-valley (PV) wavefront error of $0.3{\mu}m{\sim}0.9{\mu}m$ and root-mean-square (RMS) error of $0.06{\mu}m{\sim}0.25{\mu}m$. The high-speed Shack-Hartmann sensor measures the wavefront error of the distortion caused by the phase plate, and the SiC DM compensates for the distorted wavefront. The compensated wavefront has residual errors lower than $0.1{\mu}m$ PV and $0.03{\mu}m$ RMS. Consequently, we conclude that we can compensate for the distorted wavefront using the SiC DM in the closed-loop adaptive optics system with an operating frequency speed of 500 Hz.

• Journal of Internet Computing and Services
• /
• v.25 no.1
• /
• pp.147-155
• /
• 2024

Currently, the 4th Industrial Revolution, like other revolutions, is bringing great change and new life to humanity, and in particular, the demand for and use of drones, which can be applied by combining various technologies such as big data, artificial intelligence, and information and communications technology, is increasing. Recently, it has been widely used to carry out dangerous military operations and missions, such as the Russia-Ukraine war and North Korea's reconnaissance against South Korea, and as the demand for and use of drones increases, concerns about the safety and security of drones are growing. Currently, a variety of research is being conducted, such as detection of wireless communication abnormalities and sensor data abnormalities related to drones, but research on real-time detection of threats using radio frequency characteristic data is insufficient. Therefore, in this paper, we conduct a study to determine whether the characteristic data is normal or abnormal signal data by collecting radio frequency signal characteristic data generated while the drone communicates with the ground control system while performing a mission in a HITL(Hardware In The Loop) simulation environment similar to the real environment. proceeded. In addition, we propose an unsupervised learning-based threat detection system and optimal threshold that can detect threat signals in real time while a drone is performing a mission.

• Industry Promotion Research
• /
• v.9 no.2
• /
• pp.95-102
• /
• 2024

This study aims to compare the role of the public sector in the U.S. and Korean medical security systems and study response measures in the social risk situation of the COVID-19 virus. The COVID-19 pandemic was a typical case of a 'disaster' that spread across the world across borders in a short period of time and caused serious social welfare losses by increasing the annual number of deaths by approximately 4% in 2020. Threats to health security, such as changes in social order, unpredictable endings, prolonged control of daily life, and deepening inequality, affected the economy, politics, and environment as a whole, and people had to experience anxiety and confusion due to mental and physical stress. Furthermore, developed countries failed to provide help to low-income countries in the face of global disasters. In this situation, the country's disaster management capacity to minimize harm and secure resilience, especially disaster response capacity in the health and medical field, is inevitably very important. Therefore, this study compares how the health insurance system, which is a system to guarantee citizens' right to life, differs from the United States, a liberal health care country, and raises the need to strengthen the role of the public sector.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.2
• /
• pp.63-68
• /
• 2024

With the increasing use of transparent displays and flexible devices, polymer substrates offering excellent flexibility and strength are in demand. Since polymers are sensitive to heat, precise temperature control during the process is necessary. The study proposes a temperature measurement system for the laser processing area within the polymer base, aiming to address the drawbacks of using these polymer bases in laser-based selective processing technology. It presents the possibility of optimizing the process conditions of the polymer substrate through local temperature change measurements in the laser processing area. We developed and implemented the PDPT (Photodiode-based Planck Thermometry) to measure temperature in the laser-processing area. PDPT is a non-destructive, contact-free system capable of real-time measurement of local temperature increases. We monitored the temperature fluctuations during the laser processing of the polymer substrate. The study shows that the proposed laser-based temperature measurement technology can measure real-time temperature during laser processing, facilitating optimal production conditions. Furthermore, we anticipate the application of this technology in various laser-based processes, including essential micro-laser processing and 3D printing.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.6
• /
• pp.86-97
• /
• 2011

This study analyzed the necessity of the tentatively-named "Framework Act on Landscape Architecture" as an umbrella law in the field of landscape architecture regarding legal, industrial, and academic aspects and is intended to provide basic data to suggest the optimal legal system and legislative proceedings to control it. This study can be summarized as follows: First, a form of framework act on landscape architecture is appropriate for a compromise between ideal type and political framework. Some content is suitable for proclamatory character including present and future issue related to the landscape architecture fields. Second, legislative proceedings are more reasonable as motions coming from assembly proposals rather than government. Motions by assembly proposal recommend the following procedure: submission of a legislative bill by an assemblyperson, passing of a permanent commission, review by government, leading approval by emphasis on correspondence with the principle to carry out government affairs, proclamation. Third, a frame based on content and form can be made up of a total of 7 chapters 34 articles. The function must include the following: the suggestion of direction for government policy, the systematization of the institution and what it includes, the control of government administration, a public service system regarding public relations for landscape architecture and so on. The results of this study will form a social consensus about the necessity of a framework act regarding landscape architecture fields and contribute to informing the importance of landscape architecture as related to other industrial fields.

• Journal of dental hygiene science
• /
• v.9 no.2
• /
• pp.211-217
• /
• 2009

The purpose of this study is to investigate into company workers' general characteristics and their awareness or oral health examinations. Answer sheets for questionnaire for 267 industrial workers at Changwon city, Korea, were collected and analyzed using SPSS 12.0. Among workers who haven't visited a dental clinic for last one year, 75.6% of them didn't have dental caries. 74.0% of workers who haven't received dental scaling didn't have dental caries. 84.4% of workers who thought of themselves as having good oral health had good oral health and none of them had dental caries. 9.1% of people who had dental caries of 4 or more had bad breath. 73.4% of workers didn't need to treat dental caries, while scaling in 57.7% of them was required. To reform and improve of the system, incremental dental health care system for industrial workers is needed. Oral health education is needed to increase the motivation of industrial workers to control their basic disease.