• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2018

Microalgae is considered as one of environmentally sustainable and potential feedstocks to produce biodiesels. However, recent studies on life cycle assessments (LCA) of microalgal buidiesels have shown that energy requirement is not small to produce biodiesel from microalgae, especially during cultivation stage. The costs for carbon sources, nutrients like nitrogen or phosphorous, and water for cultivation can contribute up to 80% of the total medium costs. In the present article, recent trends on the utilization of several promising nutrient sources such as municipal wastewaters, organic fertilizers, combustion exhaust emissions and organic solid wastes were reviewed, and the potential strategies to be used as substitutes of artificial culture media, especially for the biodiesel production, were discussed.

• Journal of Environmental Health Sciences
• /
• v.28 no.2
• /
• pp.99-108
• /
• 2002

This study was carried out to evaluate the Physicochemical characteristics of mined waste(separated waste and soil) and to predict environmental effect of an old landfill site located at north of Seoul. Municipal solid waster(MSW) had been disposed of at the old landfill site used in this study for about 2 years(1990-1992). The old landfill site selected for this study had accepted mainly municipal solid waste. The landfill-mined waste contained separated waste (40.9%) and soil(59.1%) by wet weight basis. The separated waste consisted of combustible(91.0%) and non-combustible(9.0%). The combustible waste was mainly non-biodegradable plastics. The low heating value of the separated combustible waste, which is calculated by Dulong's equation, was as high as 3,470kcal/kg. According to the Korean Extraction Procedure, separated waste and soil were proved to be not hazardous. The total content of heavy metal in the separated waste and soil met standard of California State, USA. Therefore the separated waste may be relandfilled at a sanitary landfill site and/or burned up at an incinerator, and the separated old soil may be used ad landfill cover-soil at a sanitary landfill site. Water quality of two streams was grade IV, of which water could be used as industrial and agricultural water. The streams near the landfill site might not be contaminated by leachate from the old landfill site. It was estimated that organic matter in the old landfill site would not be actively biodegraded within a short period of time.

• Journal of Environmental Science International
• /
• v.9 no.3
• /
• pp.229-239
• /
• 2000

Spring, ground and thermal waters in the vicinity of Mt. Geumjeong and Mt. Baekyang area have been sampled and analyzed for major and minor elements. According to the Piper diagram, spring water belongs to $Ca-HCO_3$ and $Na-HCO_3$ types, groundwater to $Ca-HCO_3$ type, and thermal water to Na-Cl type. Based on the phase stability diagrams of $[Ca^{2+}]/{[H^+]}^2, [Mg^{2+}]/{[H^+]}^2, [K^+]/[H^+]$, and $[Na^+]/[H^+] vs. [H_4SiO_4]$, spring water, groundwater and thermal water are mostly in equilibrium with kaolinite. The result of factor analysis shows three factors (factor 1, 2 and factor 3) for the spring water, the groundwater and the thermal water which are represented by the influence of the dissolution of feldspar, calcite, anthropogenic sources (domestic and industrial wastes) and salt water.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.4
• /
• pp.653-658
• /
• 2012

There is an increasing interest in the use of electrochemical methods for the food waste treatment. The technologies using the electrochemical method provide ideal tools for approaching industrial and food wastes problems. Unlike other chemical treatments, the electrochemical systems do not make the volume of the secondary waste increase. The electrochemical methods can be operated with electrochemical apparatus and inorganic agent allow selective separation and recovery and even quieter than others. This study concerns design factors, electrode construction and wastewater treatment process of the electrochemical apparatus. The experiment of color, COD and BOD removal is much effective in using electrochemical method with ultrasonication and ozonation.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.10a
• /
• pp.35-38
• /
• 2004

Global competitive pressures are asking industrial companies to find the best way to meet their customer's requirements, reduce the costs of products, and increase productivity. Quality improvement has been proposed and implemented as a primary means of achieving these purposes. The quality improvement usually includes a goal of reducing the costs due to poor quality. While these costs of poor quality (COPQ) are not known precisely, they are known to be very high. Also, they may be underestimated by the hidden costs due to non-value activities, such as potential lost sales, costs of redesign due to quality reasons, and extra manufacturing costs due to defects, etc. In any manufacturing or service operation, all actions and resource expenditures of a company should be focused on creating value for customers. Any activity or resource of not creating the value for customers could be regarded as waste, which consequently causes the COPQ. Some companies did use dashboards to understand and identify value added or non-value added activities in order to reduce or eliminate wastes. These dashboards must be properly designed to consider inherent differences in manufacturing or service operations among business organizations. In addition, a structured quality improvement program such as the Six Sigma must support these dashboards. In this paper, a case study of designing dashboards for evaluating and reporting the COPQ in business units is presented.

• Journal of the Korean Ceramic Society
• /
• v.51 no.2
• /
• pp.64-71
• /
• 2014

Accelerated carbonation is a technique that can be used as a CCS technology for $CO_2$ sequestration of approximately 5~20% in a stable solid through the precipitation of carbonate. An alkaline inorganic waste material such as ash, slag, and cement paste are generated from incinerators, accelerated carbonation offers the advantage of lower transport and processing costs at the same generation location of waste and $CO_2$. In this study, we evaluated an amount of $CO_2$ sequestration in various types of inorganic alkaline waste processed by means of accelerated carbonation. A quantitative evaluation of $CO_2$ real sequestration based on a TG/DTA analysis, the maximum 118.88 $g/kg_{-waste}$ of $CO_2$ in paper sludge fly ash, the maximum 134.46 $g/kg_{-waste}$ of $CO_2$ in municipal solid waste incinerator bottom ash, the maximum 9.72 $g/kg_{-waste}$ of $CO_2$ in industrial solid waste incinerator fly ash, and the maximum $18.19g/kg_{-waste}$ of $CO_2$ in waste cement paste.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1098-1108
• /
• 2008

Batch type and column type experiments were performed in order to predict adsorption and movement within soil. Clay minerals montmorillonite and kaolinite were respectively added to paraquat which is a cationic compound with long residual time, 2,4-D which is an anionic compound with relatively short residual time and napropamide which is an amphoteric compound. Therefore, it is very important to determine the movements of toxic pollutants in the ground soil to establish measures to prevent soil grounds contamination and to restore contaminated soils effectively, because contamination of soil is getting severe due to these toxic wastes, industrial waste water, and agricultural chemicals, etc. Therefore, in this study, we have carried out column and batch experiments by using general toxic organic compounds as test samples in order to restore contaminated soils effectively as well as to prepare a basic data to develop absorbents that will remove various toxic organic compounds, with a grandiose purpose to prevent contaminations of soil and grounds due to various toxic organic compounds.

• Elastomers and Composites
• /
• v.47 no.2
• /
• pp.111-120
• /
• 2012

Industrial wastes of crosslinked polymers have been burned or disposed of in landfills because there is no recycling technology due to their insoluble and infusible network chain structure. However, recycling of cross-linked polymers has been taken a growing attention because of issues of environmental pollution and of resources conservation. In this paper, uprising recycling technologies of crosslinked polymers using supercritical fluid are reviewed.

• Advances in environmental research
• /
• v.2 no.2
• /
• pp.119-129
• /
• 2013

The study examined the effect of urbanization on the water quality of Nwaorie and Otamiri Rivers in Owerri metropolis, Imo State, South-East Nigeria. Water samples were collected from Nwaorie and Otamiri Rivers from four sampling stations up and down stream. Water parameters analyzed using standard procedures were: color, turbidity, temperature, pH, total hardness, total solids, metals (Iron and magnesium), anions (nitrate and ammonia) and Fecal coliform. Results showed increased levels of coloration, iron, ammonia, turbidity and fecal coliform which exceeded the World Health Organization (WHO) permissible limits for drinking water. Increase in these parameters indicated influx of industrial effluent from the nearby industries and indiscriminate disposal of wastes at the bank of the rivers. Application of ANOVA showed various degree of variation in pollutants levels between the two rivers and at different sampling points. River Nwaorie was observed to be more impacted than River Otamiri. High values of iron observed from the study could be deleterious to human health if the river water is consumed without treatment. The study, therefore, recommended proper waste management and disposal as well as effluent treatments in Owerri municipal against pollution of surface water.

• Nuclear Engineering and Technology
• /
• v.31 no.5
• /
• pp.498-505
• /
• 1999

Trivalent actinide-lanthanide group separation is difficult to perform on an industrial scale, because of the many drawbacks of the available chemical process. In this paper, picolinamide(C$_{8}$H$_{17}$) is synthesized and characterized, and extraction yields of Am-241, Eu-152 and Nd are determined in batch extraction experiments. In particular, the influence of the solvent is described. The extraction yields of Am-241, Eu-152 and Nd depended on the LiNO$_3$ concentration, the picolinamide(C$_{8}$H$_{17}$) concentration and the acidity. A favorable picolinamide(C$_{8}$H$_{17}$) concentration was found to be about 2M. The appropriate nitric acid concentration and LiNO$_3$ concentration were confirmed to be about 0.125M and 3M, respectively. The separation factor of Am and Eu was about 9.9 at optimum conditions. The picolinamide(C$_{8}$H$_{17}$) is a very promising extractant for the actinide(III)-lanthanides(III) separation.aration.aration.