• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.3
• /
• pp.116-123
• /
• 2007

Despite the number of backlight manufacturer is increased as the market of flat panel display equipments and related development devices is enlarged, the inspection based on the human eye is still used in many backlight production lines. The defects such as particle, spot and scratch on the light emitting surface of the backlight prevent the LCD device from displaying the colors correctly. From that manual inspection it is difficult to maintain the quality of backlight consistently because the accuracy and the speed of the inspection may change with the physical condition of the operater. In this paper we studied on the development of automatic backlight surface defect inspection system. For this, we made up of the computer vision system and we developed the main program with various user interfaces to operate the inspection system effectively. And we developed the image processing module to extract the defect information. Furthermore, we presented the labeling process to reconstruct defect regions using the labeling table and the defect index. From the experimental results, we found that our system can detect all defect regions identified from human eye and it is sufficient to substitute for the conventional surface inspection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.272-277
• /
• 2019

In this paper, a manufacturing method of an anti-glare cover glass on LCD for outdoor use is proposed. The main specification of cover glass is hardness and anti-glare. Hardness is achieved by using the tempered glass, and anti-glare(AG) film is laminated to meet anti-glare specification no the tempered glass. However, the AG film is difficult to maintain the AG performance continuously because the abrasion resistance of the PET film itself is as weak as about 3H. Therefore, a novel production procedure using screen printing method is proposed. The proposed coating is implemented by applying $ZnO-B_2O_3-SiO_2$ powder on glass surface and the glass is made with enhanced hardness through tempering process. In order to apply the ZBS powder uniformly on the glass surface, a screen printing process is used. The main parameters to be considered in screen printing are the oil concentration and mesh opening size. Because the amount of ZBS powder applied to the printing process is controlled by these two parameters, the correlativity is confirmed through the experiments. In order to evaluate the performance of the proposed method, the haze, surface roughness and transmittance are selected as the performance index and are compared with the AG film. As a result of comparison, it is verified that the transmittance of the proposed tempered glass is 83.1%, which is slightly lower than 89.5% of AG film, but the hardness is more than double to 7H.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.100-109
• /
• 2019

Maintainability indicates the extent to which maintenance can be done easily and quickly. The consideration of maintainability is crucial to reduce the operation and support costs of weapon systems, but if the maintainability is evaluated after the prototype production is done and necessitates design changes, it may increase the cost and delay the schedule. The evaluation should verify whether maintenance work can be performed, and support the designers in developing a design to improve maintainability. In previous studies, the maintainability index was calculated using the graph theory at the early design phase, but evaluation accuracy appeared to be limited. Analyzing the methods of evaluating the maintainability using fuzzy logic and 3D modeling indicate that the design of a system with good maintainability should be done in an integrated manner during the whole system life cycle. This paper proposes a method to evaluate maintainability using SysML-based modeling and simulation technique and fuzzy logic. The physical design structure with maintainability attributes was modeled using SysML 'bdd' diagram, and the maintainability was represented by an AHP matrix for maintainability attributes. We then calculated the maintainability using AHP-based weighting calculation and fuzzy logic through the use of SysML 'par' diagram that incorporated MATLAB. The proposed maintainability model can be managed efficiently and consistently, and the state of system design and maintainability can be analyzed quantitatively, thereby improving design by early identifying the items with low maintainability.

• Korean journal of applied entomology
• /
• v.60 no.1
• /
• pp.123-133
• /
• 2021

In order to use Osmia cornifrons more effectively in apples, we investigated the pollination effect and nesting activity of O. cornifrons on 'Hongro', the middle-season cultivar, and 'Fuji', the late-season cultivar. There was a significant difference in the nesting activity and pollination effect of O. cornifrons depending on the apple cultivar. The nesting activity, rate of trap nesting, and reproduction in 'Fuji' were 2.5, 1.5, and 3.8 times greater than in 'Hongro', respectively. The pollination effect according to cultivar 'Fuji' was 1.6 times greater than that of 'Hongro' in the central fruit set. In terms of the quality of fruit, the asymmetry index of 'Fuji' was 2.5 times lower than that of 'Hongro', and the number of apple seeds of 'Fuji' was 1.9 times greater than that of 'Hongro'. The main reason for this result was the air temperature. The activity of O. cornifrons was most affected by air temperature (R2 = 0.578). It is expected that the nesting activity and pollination effect are great in 'Fuji' (17.4-24.1℃) when the temperature during the blooming period is higher than that of 'Hongro' (12.5-20.2℃). Our study provides important information on stable apple production for apple cultivators, and can be used as an evidence for changes in flora and insect fauna caused by climate change.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.2 no.4
• /
• pp.71-102
• /
• 2007

There were many comprehensive analyses conducted within the existing research activities wherein factors affecting technology progress including investment in R&D vis-${\Box}$-vis their influences act as the determinants of TFP. Note, however, that there were few comprehensive analysis in the industrial research performed regarding the impact of the economy of scale as it affects TFP; most of these research studies dealt with the analysis of the non -parametric Malmquist productivity index or used the stochastic frontier production function models. No comprehensive analysis on the impacts of individual independent variables affecting TFP was performed. Therefore, this study obtained the TFP increase rate of each industry by analyzing the factors of the existing growth accounting equation and comprehensively analyzed the TFP determinants by constructing a comprehensive analysis model considering the investment in R&D and economy of scale (smallness by industry) as the influencers of TFP by industry. First, for the TFP increase rate of the 15 industries as a whole, the annual average increase rate for 1993${\sim}$ 1997 was approximately 3.8% only; during 1999${\sim}$ 2000 following the foreign exchange crisis, however, the annual increase rate rose to approximately 7.8%. By industry, the annual average increase rate of TFP between 1993 and 2000 stood at 11.6%, the highest in the electrical and electronic equipment manufacturing business and IT manufacturing sector. In contrast, a -0.4% increase rate was recorded in the furniture and other product manufacturing sectors. In the case of the service industry, the TFP increase rate was 7.3% in the transportation, warehousing, and communication sectors. This is much higher than the 2.9% posted in the electricity, water, and gas sectors and -3.7% recorded in the wholesale, food, and hotel businesses. The results of the comprehensive analysis conducted on the determinants of TFP showed that the correlations between R&D and TFP in general were positive (+) correlations whose significance has yet to be validated; in the model where the self-employed and unpaid family workers were used as proxy variables indicating the smallness of industry out of the total number of workers, however, significant negative (-) correlations were noted. On the other hand, the estimation factors of variables surrogating the smallness of scale in each industry showed that a consistently high "smallness of scale" in an industry means a decrease in the increase rate of TFP in the same industry.

• Journal of Environmental Impact Assessment
• /
• v.29 no.1
• /
• pp.8-25
• /
• 2020

Industrialization has increased the production of road-deposited sediments (RDS) and the level of heavy metals in those RDS, which can have a significant impact on the surrounding aquatic environments through non-point pollution. Although the relationship between contamination characteristics and particle size of RDS is important for pollution control, there is very little information on this. In this study, we investigated the characteristics of grain size distribution and heavy metal concentrations in the road-deposited sediments (RDS) collected from 25 stations in Shihwa Industrial Complex. The environmental impact of RDS with particle size is also studied. I_geo, the contamination assessment index of each metal concentration, represents the RDS from Shihwa Industrial Complex are very highly polluted with Cu, Zn, Pb and Sb, and the levels of those metals were 633~3605, 130~1483, 120~1997, 5.5~50 mg/kg, respectively. The concentrations of heavy metals in RDS increased with the decrease in particle size. The particle size fraction below 250 ㎛ was very dominant with mass and contamination loads, 78.6 and 70.4%, respectively. Particles less than 125 ㎛ of RDS were highly contaminated and toxic to benthic organisms in rivers. RDS particles larger than 250 ㎛ and smaller than 250 ㎛ were contaminated by the surrounding industrial facility and vehicle activities, respectively. As a result of this study, the clean-up of fine particles of RDS, smaller than 125-250 ㎛, is very important for the control and reduction of non-point pollution to nearby water in Shihwa Industrial Complex.

• Korean Journal of Poultry Science
• /
• v.34 no.1
• /
• pp.43-52
• /
• 2007

Experiments were conducted to investigate the effects of dietary botanicals (herbs and plant extracts) on the performance, nutrient metabolizability, small intestinal microflora, IgG level and blood parameters in broiler chickens. In Exp. 1, 1,000 (500 each sex) broiler chicks($Ross^{(R)}$) were divided into 20 groups of 50 chickens each(25 birds each sex). Four groups were assigned to each of five dietary treatments:control and diets containing antibiotics($Avillamix^{(R)}$, avillamycin-premix), Herb M(Herb $mix^{(R)}$), Plant extract B(BIOSTRONG $510^{(R)}$) and Plant extract A($APEX^{(R)}$). In Exp. 2, 240(120 each sex) broiler chicks($Ross^{(R)}$) were devided into six treatment groups:control and diets containing antibiotics($Avillamix^{(R)}$, avillamycin-premix), Plant extract D($Digestarom^{(R)}$), Plant extract P($Phellozyme^{(R)}$), Plant extract G($Galicin^{(R)}$) and Plant extract C(CRINA $POULTRY^{(R)}$). Each treatment consisted of four replicates of 10 birds each. In both experiments, birds had free access to diets and water for 5 wk on floor pens(Exp. 1) and cages(Exp. 2). In Exp.1, production index of groups fed diets supplemented with herbs and plant extracts was slightly higher than the control and those fed Herb M was highest. In Exp. 2, groups fed diets supplemented with herbs and plant extracts consumed more feed than the control during the period between 4 and 5 wk(P<0.05). Feed conversion(feed/gain) was lower in antibiotics group than other groups. The values of RBC, Hb and HCT were higher(P<0.05) in chicken fed diets supplemented with the additives than in the control in Exp. 1. BA value was lower(P<0.05) in groups fed diets supplemented with the additives than in the control in Exp. 2. Serum IgG were higher(P<0.05) in groups fed diets supplemented with the additives than in the control in both experiments. The cfu of intestinal microflora and metabolizability of nutrients were not significantly different among treatments in both experiments. It was concluded that the botanical supplements can be used as an alternative to antibiotics in broiler diets.

• Food Engineering Progress
• /
• v.21 no.4
• /
• pp.360-366
• /
• 2017

Fish skin peptide-loaded liposomes were prepared in 100 mL and 1 L solution as lab scales, and 10 L solution as a prototype scale. The particle size and zeta potential were measured to determine the optimal conditions for the production of fish skin peptide-loaded liposome. The liposome was manufactured by the following conditions: (1) primary homogenization at 4,000 rpm, 8,000 rpm, and 12,000 rpm for 3 minutes; (2) secondary homogenization at 40 watt (W), 60 W, and 80 W for 3 minutes. From this experimental design, the optimal conditions of homogenization were selected as 4,000 rpm and 60 W. For the next step, fish peptides were prepared as the concentrations of 3, 6, and 12% at the optimum manufacturing conditions of liposome and stored at $4^{\circ}C$. Particle size, polydispersion index (pdI), and zeta potential of peptide-loaded liposome were measured for its stability. Particle size increased significantly as manufacture scale and peptide concentration increased, and decreased over storage time. The zeta potential results increased as storage time increased at 10 L scale. In addition, 12% peptide showed the formation of a sediment layer after 3 weeks, and 6% peptide was considered to be the most suitable for industrial application.

• Science of Emotion and Sensibility
• /
• v.17 no.3
• /
• pp.129-142
• /
• 2014

Due to the increase of the aged population and population of the disabled today, there is a growing demand for rehabilitation medical instruments. Furthermore, there is a growing demand for evaluation indices for services that should be provided for uses of the rehabilitation medical instruments. In order to evaluate rehabilitation medical instrument designs in this study, the basic index for design evaluations shall be identified to search for assessment plans. Through this, new evaluation indices will be deduced through discussions and analysis of rehabilitation medical experts, biomedical engineers, and designers. The results of this study are summarized as follows. First, the existing design evaluation indices were collected and analyzed to construct 10 rehabilitation medical instrument design evaluation indices and 44 sub-evaluation items. These will be important evaluation standards for designing rehabilitation medical instruments in the future. Second, the design evaluation indices that must be taken into consideration when developing health care rehabilitation medical instruments are the 10 design evaluation indices of usability, cognition, safety, learning, motility, durability, economic feasibility, space, aesthetics and environmental aspects. Third, design evaluation indices of environment, space, cognition, usability, economic feasibility and aesthetics are indices that must be taken into consideration for product design, while learning, safety, motility and durability are factors that must be given special consideration for rehabilitation medical instrument design evaluation indices. Fourth, if existing product design evaluation indices placed importance on environment, space, cognition, usability, economic feasibility and aesthetics of products for design evaluation indices, rehabilitation medical instrument design evaluation indices placed importance on learning, safety, motility and durability on top of usability and economic feasibility, which are the differences between the design evaluation indices of rehabilitation medical instrument and other product designs. The 10 rehabilitation medical device design evaluation indices and 44 sub-evaluation items were carried out in this study. This research is only on the overall rehabilitation medical device design evaluation indices. In future research, the evaluation indices will be applied in the actual rehabilitation medical design device through production of prototypes, while making revisions and supplementations where necessary.

• Journal of Korea Technology Innovation Society
• /
• v.19 no.1
• /
• pp.161-190
• /
• 2016

This study aims to analyze the factors that influence the technological performance of national R&D programs, and to compare these factors with those that affect R&D in the machinery and chemical industry. This study also seeks to explore policy implications for the national R&D programs to meet the characteristics of each industrial technology. The results of this study are as follows: First, big enterprises create more Korean patents than small- and medium-sized enterprises (SME) in the machinery R&D. Moreover, government-funded research institutes produce more SCI articles than enterprises in the chemical technology R&D. Second, there is no significant difference in the number of institutions that participate in the machinery technology R&D. Third, the production of Korean patents and Science Citation Index (SCI) articles on all samples in the machinery industry are influenced by government grants. For instance, in the samples, which consist of enterprises, the creation of overseas patents is influenced by the amount of government grants. Fourth, there is no significant difference in the magnitude of private investment, regardless of the sample and industry. In conclusion, different factors influence the technological performances of the national R&D programs in the chemical and machinery technology R&D. This shows that it is necessary to consider the characteristics of industry-specific technology when making science and technology policies for the national R&D programs.