• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2007년도 춘계학술발표논문집
• /
• pp.158-161
• /
• 2007

본 연구는 고속으로 회전하는 축류압축기(송풍기)의 설계 및 운전에 기초가 되는 축류회전 익렬에서의 유동계산과 유동측정, 그리고 고속회전에 따른 진통해석과 안전진단을 위한 이상 진단 시스템개발에 관해 연구한 것이다. 따라서 회전날개의 진통해석, 선회실속시의 회전날개의 진통해석, 전 체계의 동력학적 해석, 그리고 회전축의 비틀림 진동 및 선회진동의 제어로 나누어 수행하였다. 또한 각각의 연구에 대하여 수치해석과 실험을 병행하여 이론해석과 설정한 모델의 타당성을 검증하였다.

• 연구논문집
• /
• 통권34호
• /
• pp.11-19
• /
• 2004

An Experimental study on the characteristics of high pressure gas quenching system was carried out in the present study. The characteristics of gas quenching system have been studied with high pressure gas chamber and specimen for various gas pressure and velocity which are the design parameter of quenching system. The quenching gas was used compressed air which properties are very similar with Nitrogen gas usually used in industrial gas quenching system. The result shows that the quenching rate of mid surface of specimen is lower than each ends of them which are close to low temperature quenching surface. And to increases the quenching intensity, the increment of quenching gas pressure is more efficient than the increment of quenching gas velocity at the point of reducing the circulation fan power.

• 한국기계가공학회지
• /
• 제10권5호
• /
• pp.97-103
• /
• 2011

This study is numerical analysis on flow characteristic in a standard cyclone dust separator. The cyclone dust separator is widely used in a industrial applications as a method for dust removed from gases. In cyclone chamber, a very complex flow field is formed, involving the interaction between highly swirling velocity and turbulent field. Numerical analysis with computational fluid dynamics(CFD) was carried out to investigate the working fluid that flow into cyclone dust separator. Helical entry type was increasing flow rate compared with tangent entry type. And according to increasing pressure difference was increased fan power. But, helical entry type was high performance dust separator, in comparison with tangent entry type.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.541-546
• /
• 2011

In this study, conjugate fibers were prepared from 1,4-cyclohexanedimethanol-modified polyethylene terephthalate (PET) resin using side by side conjugate spinning, sea-island type conjugate spinning, and split type conjugate spinning methods, and the properties of the conjugate fibers were investigated via several techniques. When viscosity increased, the tenacity of side by side conjugate fibers was increased, whereas elongation decreased. The sea-island conjugate fibers showed lower weight loss and surface color difference (K/S) values relative to that of regular PET fibers at the same conditions. The SEM results indicate that orange type spilt readily produced at a temperature range of 120 - 140$^{\circ}C$.

• 지식경영연구
• /
• 제20권4호
• /
• pp.149-168
• /
• 2019

In the era of the Fourth Industrial Revolution, digital transformation is emerging in the education and learning fields. As the use of the mobile Internet and mobile devices has become a daily life, mobile learning that supports a variety of learning in a mobile environment is drawing attention. Mobile learning applications (apps) are expected to expand their use by providing a convenient learning environment anytime, anywhere. This study investigates the use of mobile learning apps in English education, which is one of the most popular learning areas, and empirically examines the factors that influence the continuous use of mobile learning apps. In particular, it analyzes the differences between Chinese and Korean users. The results of this study provide theoretical and practical implications to promote the development of mobile apps suitable for mobile learning environments and the sustainable user growth in mobile learning.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.367-372
• /
• 2005

This study primarily is concerned with a new device which has been developed following the international standards to measure the ventilation performance at elevated temperature. This device can measure duration of ventilation, performance of electricity, static pressure at elevated temperature and also it is having provision to measure reversible performances during fire hazards. Invented device is closed circuit type system which is best suited for korean industrial environment with low cost and high efficiency. International standards has been compared and performance testing has been major using BS 7346 which is tested by Warrington Fire Research Centre.

• 한국산업융합학회 논문집
• /
• 제23권1호
• /
• pp.101-106
• /
• 2020

Along with dust collection efficiency, pressure loss is a very important cyclone operation factor. A severe rise in pressure loss causes the problem of cost. To solve the problem, the method connecting axial-vane type cyclones in parallel is suggested recently. The axial vane type cyclone dust collector applied in this study is a small portable type. Multiple cyclones are installed in a round type. The basic performance test on the axial vane type cyclone dust collector was conducted. As a result, the cut size reduced along with a rise in the wind velocity of the cyclone dust collector inlet. According to the test on dust collection efficiency, the effect of dust collection began to appear in the range of 3㎛ and dust collection efficiency was greatly improved at 5 ㎛. The noise of the cyclone dust collector well met the fan sound power level of KSB 6361.

• 산업공학
• /
• 제13권4호
• /
• pp.717-724
• /
• 2000

In this paper, an integrated system of optimal design, performance evaluation, and die design and manufacturing of axial fans for cooling tower is presented. The design and performance evaluation are developed based on three dimensional flow analysis so as to ensure low noise and high efficiency. The methodologies are implemented on computer as a GUI system including 3-D surface modeling and 2-D drawing file output modules. The CAD/CAM system is engaged to design the die and generate NC tool path, but the processes are also automated and integrated into the system by means of a part program coded from the design data. It is shown that the newly developed fans have superior performance and shortened lead-time compared to the existing dead-copied fans.

• 한국산업융합학회 논문집
• /
• 제24권1호
• /
• pp.45-51
• /
• 2021

The purpose of this study is to suggest the optimal shape for a local air ventilation system for fume removal, which is operated in a zinc galvanizing factory, and to propose the improvement plan for a ventilation system used in a zinc galvanizing factory through flow analysis. A part of the air sprayed by an air curtain goes out. It will be necessary to research the position of an air curtain, its spray angles, and its nozzle shape. In addition, additional research needs to be conducted on the shape of the fan installed before a hood in order to make it easy to induce fume. In a local air ventilation system, air is inhaled from the outside. The higher an inlet negative pressure is, the easier fume is removed. It was found that it was necessary to install an appropriate hole in the wall on the back of a push nozzle in order to reduce an inlet negative pressure.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권1호
• /
• pp.168-179
• /
• 2021

With the introduction of China's new policies, the Chinese animation industry has gradually formed a sustainable industrial structure chain, and the output value of the animation market is also in a state of continuous growth. Since 2013, domestic animation has been developing from "lower age" to "ageing" and "adults". At the same time, with the popularization of China's pan-entertainment industry model, the multi-domain symbiosis of the Internet and mobile Internet has been realized, creating a fan economy of star IP (Intellectual Property), and promoting the linkage of various industries under the same IP. This paper mainly analyzes the development of the animation IP market in China's pan-entertainment mode in recent years, and analyzes the cross-media operation mode of the animation industry. At the same time, it studies the application of self-media in animation.