• Journal of Computational Design and Engineering
• /
• v.1 no.3
• /
• pp.194-201
• /
• 2014

Optimization of design is an important step in obtaining tissue engineering scaffolds with appropriate shapes and inner micro-structures. Different shapes and sizes of scaffolds are modeled using UGS NX 6.0 software with variable pore sizes. The quality issue we are concerned is the scaffold porosity, which is mainly caused by the fabrication inaccuracies. Bone scaffolds are usually characterized using a scanning electron microscope, but this study presents a new automated inspection and classification technique. Due to many numbers and size variations for the pores, the manual inspection of the fabricated scaffolds tends to be error-prone and costly. Manual inspection also raises the chance of contamination. Thus, non-contact, precise inspection is preferred. In this study, the critical dimensions are automatically measured by the vision camera. The measured data are analyzed to classify the quality characteristics. The automated inspection and classification techniques developed in this study are expected to improve the quality of the fabricated scaffolds and reduce the overall cost of manufacturing.

• Journal of Korean Institute of Industrial Engineers
• /
• v.36 no.1
• /
• pp.52-58
• /
• 2010

The level of competition has reached the limits in cellular phone market and the cellular phone manufacture companies started to focus their solution in user interface. Design issues with controllability led the development and renovation of such products to the use of the touch-screen phone. Depending upon the readability, technical advances, portability and controllability, user satisfaction of touch-screen phones could vary significantly. In this research, the controllability was dealt in regard to various grip postures, in order to improve menu layout which fits for using the thumbs of both hands and a thumbs of single hand. Regression models are found to the suggest the location of buttons on the screen by redesigning the menu layout, it is expected to improve both controllability and satisfaction of the user. This result can be applicable not only to mobile phone design, but also to the design of various hand-held devices using a touch screen.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.661-665
• /
• 2010

Current subway station's office employee must perform safety management tasks by monitoring the various safety management systems. But these monitoring systems are limited in effective situational awareness and response to a state of emergency immediately. It is necessary to develop an integrated safety management system display. In this study, we developed subway station safety management system's (CCTV, fire detection & alarm system, screen door control equipment) integrated prototype display with ecological interface design framework and evaluated prototype display interface's usability with GOMS model. The result was that the ecological interface's performance was better than existing safety management system's interface.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.28 no.2
• /
• pp.93-101
• /
• 2024

Code-compliant seismic design should be essentially applied to realize the so-called emulative performance of precast concrete (PC) lateral force-resisting systems, and this study developed simple procedures to design precast industrial buildings with intermediate precast bearing wall systems considering both the effect of seismic and blast loads. Seismic design provisions specified in ACI 318 and ASCE 7 can be directly adopted, for which the so-called 1.5S_y condition is addressed in PC wall-to-wall and wall-to-base connections. Various coupling options were considered and addressed in the seismic design of wall-to-wall connections for the longitudinal and transverse design directions to secure optimized performance and better economic feasibility. On the other hand, two possible methods were adopted in blast analysis: 1) Equivalent static analysis (ESA) based on the simplified graphic method and 2) Incremental dynamic time-history analysis (IDTHA). The ESA is physically austere to use in practice for a typical industrial PC-bearing wall system. Still, it showed an overestimating trend in terms of the lateral deformation. The coupling action between precast wall segments appears to be inevitably required due to substantially large blast loads compared to seismic loads with increasing blast risk levels. Even with the coupled-precast shear walls, the design outcome obtained from the ESA method might not be entirely satisfactory to the drift criteria presented by the ASCE Blast Design Manual. This drawback can be overcome by addressing the IDTHA method, where all the design criteria were fully satisfied with precast shear walls' non-coupling and group-coupling strength, where each individual or grouped shear fence was designed to possess 1.5S_y for the seismic design.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.04a
• /
• pp.301-301
• /
• 1993

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1998.10a
• /
• pp.268-268
• /
• 1998

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1999.04a
• /
• pp.387-388
• /
• 1999

• Journal of Intelligence and Information Systems
• /
• v.12 no.4
• /
• pp.91-107
• /
• 2006

This study introduces a software system for supporting the engineering process of container terminals. The design procedure consists of data input, capacity requirements, alternative design, alternative evaluation, and results output. In order to design and evaluate alternatives rapidly, a set of libraries for container terminals was developed. The libraries consist of Wharf, Yard, TravellingArea, and Gate. The architecture of the set of libraries was designed by an object-oriented approach. Various types of container terminal models can be constructed by using a user friendly interface, the CAD based environment, and the combinations of the elements of the libraries. Alternative models can be evaluated by a simulation.

• International Journal of Quality Innovation
• /
• v.7 no.3
• /
• pp.107-115
• /
• 2006

Control charts are important tools of statistical quality control. In 1956, Duncan first proposed the economic design of $\bar{x}-control$ charts to control normal process means and insure that the economic design control chart actually has a lower cost, compared with a Shewhart control chart. An moving average (MA) control chart is more effective than a Shewhart control chart in detecting small process shifts and is considered by some to be simpler to implement than the CUSUM. An economic design of MA control chart has also been proposed in 2005. The weaknesses to only the economic design are poor statistics because it dose not consider type I or type II errors and average time to signal when selecting design parameters for control chart. This paper provides a construction of an economic-statistical model to determine the optimal parameters of an MA control chart to improve economic design. A numerical example is employed to demonstrate the model's working and its sensitivity analysis is also provided.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1171-1177
• /
• 2010

This paper presents a robust design procedure for minimizing warpage in plastic injection-molded products, where the Pick-the-Winner rule based on Taguchi's Orthogonal Array experiments and the Design Space Reduction Method are integrated for optimization. Two-step optimization approach is applied to reduce warpage in the part design stage and additionally to minimize the warpage in the process conditions design stage. Taguchi's S/N ratio is introduced as a design metric to evaluate robustness against process variations. The effectiveness of proposed optimization process is shown with an example of warpage minimization problem.