• Elastomers and Composites
• /
• 제57권4호
• /
• pp.197-204
• /
• 2022

Recently, the demand has increased for protective clothing materials capable of shielding the wearer from bullets, fragment bullets, knives, and swords. It is therefore necessary to develop light and soft protective clothing materials with excellent wearability and mobility. To this end, research is being conducted on hybrid design methods for various highly functional materials, such as carbon nanotube (CNT) sheets, which are well known for their low weight and excellent strength. In this study, a hybrid protective material using CNT sheets was developed and its performance was evaluated. The material design incorporated a bonding method that used a binder for interlayer combination between the CNT sheets. Four types of binders were selected according to their characteristics and impregnated within CNT sheets, followed by further combination with aramid fabric to produce the hybrid protective material. After applying the binder, the tensile strength increased significantly, especially with the phenoxy binder, which has rigid characteristics. However, as the molecular weight of the phenoxy binder increased, the adhesive force and strength decreased. On the other hand, when a 25% lightweight-design and high-molecular-weight phenoxy binder were applied, the backface signature (BFS) decreased by 6.2 mm. When the CNT sheet was placed in the middle of the aramid fabric, the BFS was the lowest. In a stab resistance test, the penetration depth was the largest when the CNT sheet was in the middle layer. As the binder was applied, the stab resistance improvement against the P1 blade was most effective.

• 산업융합연구
• /
• 제22권3호
• /
• pp.1-12
• /
• 2024

본 연구의 목적은 재취업 산재근로자의 직장 적응을 유형화하고, 직장 적응에 영향을 미치는 결정요인들을 탐색하는 것이다. 재취업 산재근로자의 직장 적응 집단을 유형화하기 위해, 산재근로자 522명을 대상으로 잠재프로파일분석을 실시하였다. 분석결과, 직장 적응 집단을 환경 우세 적응형(집단 1), 일 중심 적응형(집단 2), 환경 순응 적응형(집단 3)의 세 유형으로 분류되었다. 또한, 산재 후 이들의 직장 적응에 영향요인을 분석하기 위해 혼합회귀분석을 실시한 결과, 환경 우세 적응형에 비해 일 중심 적응형과 환경 순응 적응형의 직장 적응이 낮은 것으로 나타났다. 또한 학력과 자아존중감이 산재 근로자의 직장 적응에 중요한 영향을 미치는 요인이라는 것을 확인하였다. 본 연구 결과를 토대로, 재취업 산재근로자의 직장 적응을 높이기 위하여 재취업 이전 단계에서의 개인에 대한 맞춤형 지원과 재취업 이후 고용환경 두 가지 측면에서 제도를 보완할 필요가 있음을 제언하였다. 구체적으로 재활프로그램의 개발과 확산, 원직 복귀 사업주에게 한정적으로 지급되었던 지원금의 대상범위 확대 고려 등이 있다. 본 연구를 통하여 재취업 산재근로자에 대해 보다 표적화된 정책 방안을 마련할 수 있을 것으로 기대한다.

• 디지털융복합연구
• /
• 제15권5호
• /
• pp.373-380
• /
• 2017

최근 가상현실 콘텐츠는 게임, 교육, 의료, 전시, 영화, SNS 등 여러 영역에서 실험되고 있으며 도입되고 있다. 하지만 가상현실에 대한 연구는 주로 산업적, 기술적 관점에 치우쳐 있어, 콘텐츠 중심 또는 콘텐츠 관점에서의 가상현실에 대한 연구는 미미한 실정이다. 가상현실의 미래를 제대로 준비하기 위해서는 기술 중심의 연구에서 벗어나 콘텐츠 중심의 연구가 매우 절실하다. 이에 본 연구는 콘텐츠 관점에서의 가상현실 연구의 필요성을 제기하였으며, 그 구체적인 대상으로 테마파크에 적용된 가상현실 콘텐츠의 유형과 특성 그리고 가능성을 고찰하고자 하였다. 이를 위해 가상현실 기반 테마파크 콘텐츠 유형의 분류를 시도하였고, 유형 분류의 기준으로는 플레이어의 위치 이동 가능성 및 이동 방식에 따라 '고정형', '연속적 이동형', '분절적 이동형'으로 나누고 여기에 촉각, 미각, 후각, 균형감 등의 감각이 결합되는 방식에 따른 분류법을 제시하였다.

• 한국산업융합학회 논문집
• /
• 제23권5호
• /
• pp.727-733
• /
• 2020

Recently, reciprocating cryogenic pumps are mainly developed for small-and-mid sized fuel supply systems. Centrifugal type pumps are not actively developed. Most cryogenic submerged pumps are imported. For transportation, cryogenic liquefied natural gas requires the liquid pump technology that can works in extreme evironments. In order to transport liquefied natural gas, it is necessary to apply pump technology. This is the fundamental research for developing the submerged pump technology applicable to the transportation and storage system equipment of cryogenic liquefied system. It tries to secure basic design materials through reverse-engineering in the cryogenic submerged pump development. Regarding materials, STS-304 and STS-431 which are stainless materials widely used in the cryogenic area are applied. Aluminum alloy is applied to impeller and upper manifolder and the pump rotates at the high speed of 6,000rpm.

• 한국산업융합학회 논문집
• /
• 제12권1호
• /
• pp.19-25
• /
• 2009

We suggest and evaluate a dynamic scheduling rule of machines and material handling systems for on-line operation in job shop type Flexible Manufacturing System. Alternating status should be able to take operation scheduling procedures and without delay in dynamic industrial environments effectively. The interaction(SPT-NS, SPT-QSNS, SPT-NUJ, EDD-NS, EDD-QSNS, EDD-NUJ, CR-NS, CR-QSNS, CR-NUJ) between machine operation scheduling and AGV dispatching rule were also studied in this research. The performance evaluation which was obtained from DSS compares the performance of Flow time, and Empty to loaded travel ratio. It is Compared with the best rules & two system.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2001년도 하계 학술대회 논문집(KISPS SUMMER CONFERENCE 2001
• /
• pp.121-124
• /
• 2001

In industrial actual control system, PID controller has been used with its high delicate control system in position control system. PID controller has simple structure and superior ability in several characteristics. When the response of system is changed by delay time, variable load , disturbances and external environment, control gain of PID controller must be readjusted on the system dynamic characteristics. Therefore, a control ability of PID controller is degraded when th control gain is inappropriately determined. When the response characteristic of system is changed under a condition, control gain of PID controller must be changed adaptively to be a waited response of system. In this paper an adaptive-tuning type PID controller is constructed by self-recurrent Neural Network(SRNN). applying back-propagation(BP) algorithm. Form the result of computer simulation in the proposed controller, its usefulness is verified.

• 제어로봇시스템학회논문지
• /
• 제7권3호
• /
• pp.276-279
• /
• 2001

Many industrial processes that are operated by rotating machines and large air-moving fans are excellent examples to which the single channel ANC systems can be applied. In these environments, the active noise control techniques are most popular nowadays. In this paper, a modified LMS algorithm(EAC, Error Amplitude Compared) is proposed. The algorithm is a kind of variable step-size LMS-type algorithm. Computer simulations show that the proposed EAC algorithm achieves a better convergence time than a conventional VS(Variable Step-Size) algorithm, Also, this algorithm has been implemented by using and experimental duct system.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.751-756
• /
• 2023

In this study, We investigated a fire case and performed an experiment to prevent fire from sparks that is generated during grinding operation. Before conduct the test, confirmed that the generating mechanism of fire-flakes in working grinder and the fire experiment was conducted using commonly tools, flammable materials in industrial field. in result, It could be measured scattering distance, temperature, ignition possibility by type of combustible materials. Based on the results of this study, We are expected to be used as basic data for fire prevention in grinding Industry.

• 품질경영학회지
• /
• 제47권4호
• /
• pp.713-723
• /
• 2019

Purpose: The purpose of this study is to develop a statistical program for capability analysis of measuring system and measurement process based upon KS Q ISO 22514-7. Methods: R is a powerful open source functional programming language that provides high level graphics and interfaces to other languages. Therefore, in this study, we will develop the statistical program using R language. Results: The R program developed in this study consists of the following five modules. ① Measuring system capability analysis with Type 1 study data: MSCA_Type1.R ② Measuring system capability analysis with Linearity study(Type 4 study) data: MSCA_Type4.R ③ Measurement process capability analysis with Type 1 study & Gage R&R study data: MPCA_T1GRR.R ④ Measurement process capability analysis with Type 4 study & Gage R&R study data: MPCA_T4GRR.R ⑤ Attribute measurement processes capability analysis : AttributeMP.R Conclusion: KS Q ISO 22514-7 evaluates measuring systems and measurement processes on the basis of the measurement uncertainty that was determined according to the GUM(KS Q ISO/IEC Guide 98-3). KS Q ISO 22514-7 offers precise procedures, however, computations are more intensive. The R program of this study will help to evaluate the measurement process.

• 한국수소및신에너지학회논문집
• /
• 제31권4호
• /
• pp.387-394
• /
• 2020

A parametric study of a 2.5 kW class propeller type micro hydraulic turbine was performed. In order to analyze the internal flow characteristics in the hydraulic turbine, three dimensional Reynolds-averaged Navier-Stokes equations with shear stress transport turbulence model were used and the hexahedral grid system was used to construct computational domain. To secure the reliability of the numerical analysis, the grid dependency test was performed using the grid convergence index method based on the Richardson extrapolation, and the grid dependency was removed when about 1.7 million nodes were used. For the parametric study, the axial distance at shroud span (L) between the inlet guide vane and the runner, and the inlet and outlet blade angles (β₁, β₂) of the runner were selected as the geometric parameters. The inlet and outlet angles of the runner were defined in the 3 spans from the hub to tip, and a total of 7 geometric parameters were investigated. It was confirmed that the outlet angles of the runner had the most sensitive effect on the power and efficiency of the micro hydraulic turbine.