• Industrial Engineering and Management Systems
• /
• v.14 no.1
• /
• pp.58-72
• /
• 2015

A primary concern of national R&D plans is to encourage technological development in private firms and research institutes. For effective R&D planning and program support, it is necessary to assess technological impacts that may exist both directly and indirectly among technology areas within the whole technology system; however, previous studies analyze only direct impacts among technologies, failing to capture both direct and indirect impacts. Therefore, this study proposes an approach based on decision-making trial and evaluation laboratory (DEMATEL) to identifying specific characteristics of technology areas, such as technological impact and degree of cause or effect (DCE). The method employs patent co-classification analysis to construct a technological knowledge flow matrix. Next, to capture both direct and indirect effects among technology areas, it incorporates the modified DEMATEL process into patent analysis. The method helps analysts assess the technological impact and DCE of technology areas, and observe their evolving trajectories over time, thereby identifying relevant technological implications. This study presents a case study using Korean patents registered during 2003-2012. We expect our analysis results to be helpful input for R&D planning, as well as the suggested approach to be incorporated into processes for formulating national R&D plans.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.149-158
• /
• 2015

Up-to-date manufacturing companies have faced a market-driven environment of pull production order. There should be a difference in operating manufacturing resources according to the type, quantity, and delivery time of manufactured products, because the process situation in pull production is changed by customer orders. And it should be taken into account from the stage of preparing for production such as process design and the placement and utilization of manufacturing resources. However, the feasibility of production plans is limited because most of small manufacturing businesses make production/supply plan of the parts and products assuming that equipment abilities in scheduling is sufficient without managing process standard information systemically. In this study, a discrete event simulation system based on BOM (bill of material), that is F-OPIS (online productivity innovation system), is introduced and a case study on application of the system leading to improving productivities is presented. F-OPIS deals with a decision-problem on production management and it is specialized for small-and- medium sized manufacturing companies. The target company of this case study is a typical small-and-medium sized manufacturing company in Korea, that produces various machined parts. The target company adopts make-to-stock production management to prevent tardy delivery because of fluctuations in demand. Therefore, it is required to apply an efficient inventory control solution for improving productivities. In this paper, based on the constraints of working capacity of manufacturing resources, the bottleneck process is analyzed as production conditions are changed. Consequently, an improvement plan is proposed, that eventually enhances overall utilization rates of resources in the bottleneck process and reduces overall production lead-time and inventory level.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.40
• /
• pp.81-90
• /
• 1996

It is one of the most important thing to select pneumatic components in pneumatic system design. For the purpose of selecting pneumatic components, case objects are described as a knowledge representation and the most similar case object must be selected by decision making in computer. In this paper, case objects are represented using the methodology that is used for CBR(Case Base Reasoning) and methodology that the most similar case can be selected is Proposed. Algorithm VIWNNR(Varying Index Weight-based Nearer Neighbor Retrieval) is accomplished by varying index weight, that is not considering a index matching as true or false but varying a size of weight according to the degree of matching and enhance the flexibility of SCRM(Similar Case Retrieval Module) involving fuzzy concept in matching the cases. SCRM is tested In verify the feasibility to select pneumatic linear components and is peformed effectively.

• Environmental and Resource Economics Review
• /
• v.16 no.3
• /
• pp.643-651
• /
• 2007

The Environmental Kuznets Curve Hypothesis postulates an inverted-U shaped relationship between GDP per capita and various pollutants. Pollutants emission increases up to a certain level as income goes up; after that, it decreases. This paper investigates the relationship between industry pollutants taking industrial sulfur dioxide omission as example, and economic growth by using province-panel data set from 1989 to 2004 in 28 provinces of P. R. China. The result shows that the EKC hypothesis may be supported in the case of industrial sulfur dioxide, and the GDP per capital of turning point is about RMB 13,548 (at 1978 price). Except Shanghai, all the provinces GDP per capital in this study are less than RMB 13,548, indicating the amount of industrial sulfur dioxide emission will be increasing in the near future. To realize sustainable development and pollutants abatement, the central and local government should adopt an integrated strategy to protect environment.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.2
• /
• pp.23-28
• /
• 2007

"Getting to market first" is extremely critical in this competitive business environment. The speed at which products are developed and released to market is tightly linked to profitability and market share. Many companies that have been very skeptical of Rapid Tooling (RT) technologies developed so far are working on Hybrid Tooling (HT) that can really meet the market standards. This paper describes the experimentation how HT process has been being successfully established and effectively applied with typical case study. Through the experimentation, Ceramic-filled HT was found to be aptly suited for the low grade mold, both in terms of the lead time, dimensional accuracy, and tooling cost.

• Journal of Industrial Convergence
• /
• v.14 no.1
• /
• pp.1-13
• /
• 2016

I have done a case study on individual level based-organizational behavior textbooks published in Korea and USA. The objects are 'organizational behavior' by Su Yong Jung and 'organizational behavior' by Im Chang Hee in Korea, and 'organizational behavior' by Schermerhorn, Osborn, Uhl-Bien, & Hunt and 'organizational behavior' by Robbins, & Judge. The goal of this study is to identify the differences of the perspectives on the individual level based-organizational behavior between Korean and American textbooks. This research finding shows that it is valid to classify organizational behavior into such categories as individual differences, attitude, emotion & stress, perception & learning, and motivation in the Korean textbooks for the better future study.

• Journal of Industrial Convergence
• /
• v.14 no.1
• /
• pp.27-37
• /
• 2016

I have done a case study on organization level based-organizational behavior textbooks published in Korea and USA. The objects are 'organizational behavior' by Su Yong Jung and 'organizational behavior' by Im Chang Hee in Korea, and 'organizational behavior' by Schermerhorn, Osborn, Uhl-Bien, & Hunt and 'organizational behavior' by Robbins, & Judge. The goal of this study is to identify the differences of the perspectives on the organization level based-organizational behavior between Korean and American textbooks. This research finding shows that it is valid to classify organizational behavior into such categories as organizational structure, organizational culture, and organizational change in the Korean textbooks for the better future study.

• Journal of Industrial Convergence
• /
• v.14 no.1
• /
• pp.47-58
• /
• 2016

I have done a case study on group level based-organizational behavior textbooks published in Korea and USA. The objects are 'organizational behavior' by Su Yong Jung and 'organizational behavior' by Im Chang Hee in Korea, and 'organizational behavior' by Schermerhorn, Osborn, Uhl-Bien, & Hunt and 'organizational behavior' by Robbins, & Judge. The goal of this study is to identify the differences of the perspectives on the group level based-organizational behavior between Korean and American textbooks. This research finding shows that it is valid to classify organizational behavior into such categories as group & team, communication, decision making, leadership, power, and conflict & negotiation in the Korean textbooks for the better future study.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.78-86
• /
• 2015

Up-to-date business environment for manufacturers is very complex and rapidly changing. In other words, companies are facing a variety of changes, such as diversifying customer requirements, shortening product life cycles, and switching to small quantity batch production. In this situation, the companies are introducing the concept of JIT (just-in-time) to solve the problem of on-time production and on-time delivery for survival. Though many companies have introduced ERP (enterprise resource planning) systems and MRP (material requirement planning) systems, the performance of these systems seems to fall short of expectations. In this paper, the case study on introducing an APS (advanced planning and scheduling) system based on dispatching rules to a machining company and on finding a method to establish an efficient production schedule is presented. The case company has trouble creating an effective production plan and schedule, even though it is equipped with an MRP-based ERP system. The APS system is applied to CNC (computer numerical control) machines, which are key machines of the case company. The overall progress of this research is as follows. First, we collect and analyze the master data on individual products and processes of the case company in order to build a production scheduling model. Second, we perform a pre-allocation simulation based on dispatching rules in order to calculate the priority of each order. Third, we perform a set of production simulations applying the priority value in order to evaluate production lead time and tardiness of pre-defined dispatching rules. Finally, we select the optimal dispatching rule suitable for work situation of the case company. As a result, an improved production schedule leads to an increase in production and reduced production lead time.

• Journal of Korean Society for Quality Management
• /
• v.49 no.4
• /
• pp.641-654
• /
• 2021

Purpose: One distinctive trend in the recent industrial and technological development has been the change in the structures of industries brought by information technology, boosting the productivity of different sectors. This relation has clearly opened a path for the fourth industrial revolution to reform numerous industrial sectors, including i-fashion sectors. Therefore, in this research, we would like to present the direction of the direction policy for the fusion of the manufacturing industry and the service industry of i-fashion. Methods: In this study, an empirical time series data analysis of machinery investment efficiency and capital investment efficiency of 43 industrial sectors in manufacturing and service was conducted to show their potential and ongoing convergence toward i-fashion. Results: Most impressive as a finding in this research was that those sectors previously underinvested due to a combination of technological and financial reasons found an exit for growth. In textile and apparel sectors, that could be the i-fashion. Conclusion: One strong implication of this study is that sectoral level convergence based on technology and industry is occurring, and i-fashion is one of the industrial convergence case to be observed.