• Journal of the Korea Concrete Institute
• /
• v.25 no.5
• /
• pp.539-546
• /
• 2013

Cement industry in 1997 began to use industrial waste in cement factory for purpose of resource recycling. However recently, environmental hazard of the cement in accordance with recycling of industrial waste have been raised a problem by contamination around the cement factory and heavy metal leaching in cement. In particular, the presence of $Cr^{6+}$ in cement has become a critical issue, the studies for minimizing of $Cr^{6+}$ in cement have been performed. But, in domestic, most of the research on heavy metal leaching was carried out from the perspective of the cement. Environmental safety assessment in terms of concrete is needed because cement is used to the concrete material. Therefore, this paper was evaluated heavy metals leaching of deteriorated concrete by severe conditions. test result showed that $Cr^{6+}$ were not detected from all the variables.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.338-343
• /
• 2017

In this study, blast furnace slag powder was used in concrete to help reduce carbon dioxide emissions and to recycle industrial waste. Blast furnace slag powder is a byproduct of smelting pig iron and is obtained by rapidly cooling molten high-temperature blast furnace slag. The powder has been used as an admixture for cement and concrete because of its high reactivity. Using fine blast furnace slag powders in concrete can reduce hydration heat, suppress temperature increases, improve long-term strength, improve durability by increasing watertightness, and inhibit corrosion of reinforcing bars by limiting chloride ion penetration. However, it has not been used much due to its low compressive strength at an early age. Therefore, this study evaluates the effects of steam curing for increasing the initial strength development of concrete made using slag powder. The relationship between compressive strength, SEM observations, and XRD measurements was also investigated. The concrete made with 30% powder showed the best performance. The steam curing seems to affect the compressive strength by destroying the coating on the powder and by producing hydrates such as ettringite and Calcium-Silicate-Hydrate gel.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.85-91
• /
• 2020

The necessity for ground reinforcement of structures has been increasing in South Korea because buildings have encountered constructional problems such as inclined structures and collapses caused by earthquakes or differential settlement of the foundations. With regard to a ground reinforcement method, an increasing number of high-strength concrete piles have been used based on their advantages, including a wide range of penetration depth and a high load-bearing capacity. However, problems such as the destruction of a pile head during on-site placement work can occur when the pile has insufficient strength. For this reason, the strength of such piles should be managed more thoroughly. Thus, this study analyzed the strength properties of high-strength concrete piles using blast furnace slag (BFS) powder as a cement replacement, which was generated as an industrial byproduct. The analysis results indicated that the compression strength of the concrete piles increased when 10% to 20% of the cement was replaced with ground granulated blast-furnace slag (GGBS). In addition, the compression strength of the concrete piles was calculated to be 80.6 MPa when 20% of the cement was replaced with GGBS, which was greater by 5% than that of an ordinary Portland cement (OPC) specimen.

• Applied Chemistry for Engineering
• /
• v.21 no.6
• /
• pp.653-658
• /
• 2010

Biodiesel is well known for an eco-friendly alternative fuel for petrodiesel. But biodiesel has a disadvantage since it is derived from expensive food resource. In this study, we synthesized the biodiesel from duck's oil which was food trash via transesterification under base catalyst. After analytic result of density, kinematic viscosity, cold temperature characteristics, lubricity and cetane number which were main fuel characteristics, this duck's biodiesel has enough potential to use as fuel except only domestic winter season.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.1
• /
• pp.22-25
• /
• 2017

Steel slag has been considered as an industrial waste. A huge amount of slag is produced as a byproduct and the steel slag usually has been dumped in a landfill site. However the steel slag contains valuable resources such as iron, copper, manganese, and magnesium. Superconducting magnetic separation has been applied on recovery of the valuable resources from the steel slag and this process also has intended to reduce the waste to be dumped. Cryo-cooled Nb-Ti superconducting magnet with 100 mm bore and 600 mm of height was used as the magnetic separator. The separating efficiency was evaluated in the function of magnetic field. A steel slag was ground and analyzed for the composition. Iron containing minerals were successfully concentrated from less iron containing portion. The separation efficiency was highly dependent on the particle size giving higher separating efficiency with finer particle. The magnetic field also effects on the separation ratio. Current study showed that an appropriate grinding of slag and magnetic separation lead to the recovery of metal resources from steel slag waste rather than dumping all of the volume.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.232-238
• /
• 2016

In this study, a liquid carbonation method was applied for producing precipitate calcium carbonate by liquid-liquid reaction. Also a shuttle mechanism of wet chemical absorption using MEA was utilized. The high concentration $CO_2$(A) and exhaust gas(B) was used for collecting carbon dioxide in the 30% MEA aqueous solution, and $CO_2$ was fixed with rate of 0.35 mg of $CO_2$ per mg of sludge through the liquid carbonation process. It was found from SEM data that calcium carbonate was mainly made up with spherical vaerite with the mixing of a small quantity of calcite.

• Journal of Environmental Science International
• /
• v.22 no.10
• /
• pp.1327-1335
• /
• 2013

Na-A zeolite (Z-Cl) was synthesized from coal fly ash, which is a byproduct of coal combustion for the generation of electricity. The adsorption of $Cu^{2+}$ and $Zn^{2+}ions$ onto Z-C1 was investigated via batch tests over a range of temperatures (303.15 to 323.15 K). The resultant experimental equilibrium data were compared to theoretical values calculated using model equations. With these results, the kinetics and equilibrium parameters of adsorption were calculated using Lagergren and Langmuir-Freundlich models. The adsorption kinetics revealed that the pseudo second-order kinetic mechanism is predominant. The maximum adsorption capacity ($q_{max}$) values were 139.0-197.9 mg $Zn^{2+}$/g and 75.0-105.1 mg $Cu^{2+}/g$. Calculation of the thermodynamic properties revealed that the absorption reactions for both $Cu^{2+}$ and $Zn^{2+}$ were spontaneous and endothermic. Collectively, these results suggest that the synthesized zeolite, Z-C1, can potentially be used as an adsorbent for metal ion recovery during the treatment of industrial wastewater at high temperatures.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.474-478
• /
• 2018

Thermal decomposition of waste Achyranthes Root (WAR) emitted from its decoction process was investigated using a TG analyzer and a fixed-bed reactor. The WAR had the larger C and fixed carbon content than fresh AR (FAR) due to the extraction of hemicelluloses from FAR during decoction process. Thermogravimetric (TG) analysis results also revealed the elimination of hemicellulose by its decoction. Relatively high contents of the cellulose and lignin made high contents of their typical pyrolyzates, such as acids, ketones, furans, and phenols, in the pyrolysis of WAR using the fixed-bed reactor. The increase of pyrolysis temperature from 400 to $500^{\circ}C$ increased yields of oil and gas due to the more effective cracking efficiency of WAR at a higher temperature. The chemical composition of product oil was also changed by applying the higher pyrolysis temperature, which increased the selectivity to furans and phenols.

• Korean Journal of Microbiology
• /
• v.28 no.4
• /
• pp.311-317
• /
• 1990

Intraspecific and interspecific protoplast fusions in/between C. thermocellum and C. thermohydrosulfuricum were studied. Protoplast fusions were well induced in 30-40% PEG solution, however, their fusion frequencies were low level of 1.2*10$^{-7}$ for intraspecific fusion of C. thermocellum, $6.7*10^{-7}$ for C. thermohydrosulfuricum, and 4.2*10$^{-7}$ for interspecific fusion between above two Clostridia, respectively. Most fusants were unstable and segregated after 3 subcultures. Relatively stable intraspecific C. thermocellum fusant FTT17, intraspecific C. thermohydrosulfurecum fusant FSS22 and interspecific fusant FTS3, which were stable after several subcultures, were selected and properties of fusants were further investigated, Phenotypes of the fusants were similar with wild types mostly in cellular morphology, carbon source assimilation and enzyme activities. However they were differed in assimilation of pyruvic acid and sorbitol as carbon source. The DNA contents of fusants were slightly increased compared with wild types. Ethanol production by intraspecific and/or interspecific fusants was not increased, however, acetic acid production as byproduct was decreased or not detected, which indicates that industrial thermophilic anaerobes can be improved by means of protoplast fusion of two strains.

• Journal of Environmental Health Sciences
• /
• v.19 no.1
• /
• pp.66-70
• /
• 1993

Introduction : Methanethiol is a toxicant that is a byproduct in the industrial process (oil refinery), and it is produced in vivo from methionine via transamination in case of its overintake. And it also can be generated by the action of mucosal thiol Smethyltransferase on hydrogen sulfite which is formed by anaerobic bacteria in the intestinal tract. The toxicity of methanethiol has often been suggested as one of endogenous factors involved in the pathogenesis of hepatic encephalopathy. Furthermore, methanethiol could cause the membrane damage and inhibition of some membrane protective enzymes.