• Journal of Korea Foundry Society
• /
• v.27 no.3
• /
• pp.135-139
• /
• 2007

To produce higher quality of titanium casting at a lower cost, the new titanium casting technology by using a permanent metal mold was developed and applied to fabricate hip joint for biomedical application. The present study was carried out to investigate the reactivity and fluidity of the Ti-6.0 wt%Al-4.0 wt%V alloy with metal mold by applying various ceramic powders coating on the mold surface. The molten titanium for manufacturing hip joint was poured into steel mold. No reaction layer was formed on the surface of specimens fabricated steel mold coated with $Y_2O_3$ powder.

• The Korean Journal of Ecology
• /
• v.17 no.1
• /
• pp.69-78
• /
• 1994

The acidic deposition (wet) was collected at three different locations; representative industrial (Kun-Jang industrial areas), semiindustrial (Kunsan City) and nonindustrial (Daeya areas) region between March, 1991 and June, 1993. Samples were analyzed for major chemical components along with pH. Also the responses of Hypnum filunzaeforme to the acidic deposition adjusted to pH 4.6, 3.6 and 2.6 with 1:4 molar ratio of nitric to sulfuric acid were investigated. Seasonal variation of pH showed the lowest in early spring and the highest in summer. The annual mean concentrations of $S0_4^{2-},\;NO_3^{-}\;and\;NH_4^{+}$ were 2.94 (81.0%), 0.48 (13.2%) and 0.21 (5.78%) mg/l in industrial region and 0.61 (64.21%), 0.25 (26.3%) and 0.9 (9.5%) mg /I in nonindustrial region, respectively. $S0_4^{2-}$ contents of industrial region was 4 times higher than those of nonindustrial region. The ratio of $S0_4^{2-}\;to\;NO_3^{-}$ was 4.75~7.35 in industrial region and 0.69-6.36 in nonindustrial region. The acidic deposition near industrial region was associated with excess ions, expecially $S0_4^{2-}$. Nitrate reductase activity(NRA) of mosses was inhibited by acidic deposition in both regions. The time required for the maximum NRA induction by 2mM $KNO_3$ was shortened in mosses collected from industrial region. Photosynthesis of H. plumaejorme began to decrease with acidic deposition by pH below 4.6, and was completely inhibited at pH 2.6 in both regions. Water potential of mosses treated with acidic deposition was almost constant during 18 days, however after withholding the supply of acidic deposition, it was rapidly decreased.

• Journal of Korean Society for Quality Management
• /
• v.49 no.4
• /
• pp.447-466
• /
• 2021

Purpose: This article aims 1) to propose Quality 4.0 concept through surveying related literature, 2) to suggest key elements of Quality 4.0 by arranging the elements of Quality 4.0 that appeared in the literature, 3) to determine the levels of Quality 4.0, and 4) to suggest ideas for effective deployment of Quality 4.0. Methods: Eleven papers or documents are reviewed for Quality 4.0 concept; two papers and one document are investigated for key element extraction of Quality 4.0; and smart factory roadmap and industry 4.0 maturity model are studied to determine the levels of Quality 4.0. Results: 1) Quality 4.0 definition is proposed. 2) Three key elements are determined: data acquisition and analytics, connection and integration, and leadership and culture. 3) Six Quality 4.0 levels are determined. 4) Some suggestions are addressed for effective deployment of Quality 4.0. Conclusion: 1) Definition, key elements, levels, and some suggestions on effective deployment of Quality 4.0 are addressed. 2) Specific contents of Quality 4.0 education and training courses should be provided in the future. 3) Two future research directions are proposed.

• The Korean Journal of Food And Nutrition
• /
• v.5 no.2
• /
• pp.99-103
• /
• 1992

Patterns in the outbreaks of senile diseases were investigated on 1, 264 workers by special examination among the 43, 210 industrial workers by the screening test performed in Kwang-ju and Chon-nam Branch of Korean Industrial Health Association from January 4 to December 31 in 1991. The results are summarized as follows : 1) Prevalence rate of senile diseases of industrial workers was 2.9%. And prevalence rate according to the kinds of senile diseases was observed in the order of hepatitis (0.9%), hypertension(0.7%), diabetes mellitus(0.5%), anemia(0.4%). 2) Prevalence rate of complicated senile diseases of industrial workers was 0.5%. And prevalence rate according to kinds of complicated senile diseases was observed in the order of others hypertension and arteriosclerosis (0.1%), HBV and others chronic hepatitis(0.1%), essential hypertension and arteriosclerosis(0.03%), iron deficiency anemia and leukopenia(0.03%).

• Journal of Korean Society for Quality Management
• /
• v.51 no.3
• /
• pp.403-418
• /
• 2023

Purpose: The acceleration of technological innovation, specifically Industry 4.0, has triggered the emergence of a quality management paradigm known as Quality 4.0. This study aims to provide a systematic overview of dispersed studies on Quality 4.0 across various disciplines and to stimulate further academic discussions and industrial transformations. Methods: Text mining and machine learning approaches are applied to learn and identify key research topics, and the suggested key references are manually reviewed to develop a state-of-the-art overview of Quality 4.0. Results: 1) A total of 27 key research topics were identified based on the analysis of 1234 research papers related to Quality 4.0. 2) A relationship among the 27 key research topics was identified. 3) A multilevel framework consisting of technological enablers, business methods and strategies, goals, application industries of Quality 4.0 was developed. 4) The trends of key research topics was analyzed. Conclusion: The identification of 27 key research topics and the development of the Quality 4.0 framework contribute to a better understanding of Quality 4.0. This research lays the groundwork for future academic and industrial advancements in the field and encourages further discussions and transformations within the industry.

• 산업보건소식
• /
• no.48
• /
• pp.9-18
• /
• 1987

The results of this study which had been investigated to analyse heavy metal levels and to compare lead, cadmium, copper and zinc concentration in urine of children who lived around the industrial area and the agricultural area. Samples were collected and analyzed from September to December 1986 from 7-9 years old children living in Seoul (4 7 cases), lri ( 64 cases) industrial area and Chinan (56 cases) agricultural area. The summarized results were as follows: 1) The concentrations of lead were Seoul 28.7 $\pm$17.7 ug/l, lri 25.3 $\pm$7.5 ug/l and Chinan 19.3 $\pm$5.2 ug/l 2) The concentrations of cadmium were Seoul 1.5 $\pm$0.8 ug/l, Iri 1.4 $\pm$0.5 ug/l and chinan 0.9 $\pm$0.3 ug/l 3) The concentrations of copper were Seoul 12.8 $\pm$7.0 ug/l, Iri 10.5 $\pm$8.4 ug/l and Chinan 10.0 $\pm$4.5 ug/l 4) The concentrations of zinc were Seoul 383 $\pm$279 ug/l, Iri 329 $\pm$133 ug/l and Chinan 267 $\pm$181 ug/l 5) In lead, cadmium and zinc concentration of children, there were statistical difference between the industrial area and the agricultural area 6) There were no indicated significantly levels by the Sex

• Korean journal of applied entomology
• /
• v.56 no.1
• /
• pp.77-81
• /
• 2017

The results from our investigation showed differences in pine needle damage by Thecodiplosis japonensis Uchida et Inouye and indicate serious environmental pollution caused by a petrochemical industrial complex. The gall formation rate by T. japonensis near the industrial complex was 47.94% compared to 9.94% in the site farthest from the complex. The average length of pine needles damaged by T. japonensis near the industrial complex and farthest site were 4.5 cm and 4.9 cm, respectively. The average number of larvae in pine needle galls near the industrial complex and farthest site were 3.4 and 2.4, respectively. The average body length and width of fullgrown larvae near the industrial complex were 2.40 mm and 0.7 mm, respectively, whereas larvae in the site farthest from the complex were 2.45 mm in length and 0.71 mm in width.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.78
• /
• pp.53-72
• /
• 2018

Recently, it has been known that it need to be solved export marketing on expanding export of Small Business Commodity. Therefore, the purpose of this paper is to analyse on expanding export of Small Business Commodity through e-Trading Application in Industrie 4.0. This study deals with the terms of three connection success factors on expanding export of Small Business Commodity through e-Trading Application in Industrie 4.0 which are a firm's subjective factors, a industrial environment factors, and a governmental policy factors. According to analysis results of the three success factors, a firm's subjective factors(4.13 score) are scored at the most ones of the three success factors, to be compared with a industrial environment factors(3.89 score), with a government policy factors(3.72 score). Therefore, first of all, it is important to expanding export of Small Business Commodity through e-Trading Application in Industrie 4.0 through as follows, a firm's subjective factors : (1) to procure concentrated market strategy and real market capacity, (2) to procure speedy satisfaction of customer needs and confidence, (3) to procure ability of export marketing through e-Trading Application, (4) to enhance export expanding strategy coincided in Industrie 4.0. And, the next, we have to expanding export of Small Business Commodity through e-Trading Application in Industrie 4.0 through considering a industrial environment factors and a government policy factors.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• v.5 no.5
• /
• pp.659-670
• /
• 2018

The Industrial Internet of Things (IIoT) confronts industrial manufactures with economic, ecological, as well as social benefits and challenges, referring to the Triple Bottom Line of sustainability. So far, research has mainly investigated its dimensions in isolation or economic aspects have not been compared with ecological and social perspectives. Further, research misses studies that are devoted to the special characteristics and requirements of Small and Medium-sized Enterprises (SMEs). This study aims to contribute to close this research gap, providing a research context that encompasses all three dimensions of sustainability. The results are based on data obtained from 329 SMEs, 222 in Germany and 107 in China, therefore allowing for a comparison of the concepts "Industrie 4.0" and "Made in China 2025" in the context of SMEs. In general, German SMEs expect a lower impact through "Industrie 4.0", perceiving the concept as more beneficial for larger enterprises. We further find that Chinese SMEs foremost see social benefits. Challenges whilst introducing "Industrie 4.0"by German SMEs as well as several frame conditions are perceived more relevant than for "Made in China 2025", as seen by Chinese SMEs. The paper closes with implications for research and practice based on these findings.

• Journal of Environmental Science International
• /
• v.16 no.4
• /
• pp.415-423
• /
• 2007

This study assessed the characteristic of BTEX (Benzene, Toluene, Ethylbenzene, Xylene) concentration ratios of industrial emission sources and the neighborhoods of industrial area, fuel such as gasoline, light oil, LPG, and similar gasoline, and ambient air in Daegu. The BTEX in aromatic compounds was the most abundant VOC in Daegu. The BTEX ratios were (0.2:2.6:1.0:1.8) for the neighborhoods of industrial area, (2.6:11.3:1.0:1.2) for residential area, (2.2:11.0:1.0:1.6) for commercial area, (1.0:14.9:1.0:1.3) for industrial area, and (0.2:2.6:1.0:1.8) for the neighborhoods of industrial area. Average BTEX ratios in Daegu were B/T ratio (0.1), B/EB ratio (1.5), B/X ratio (1.1), T/EB ratio (12.6), T/X ratio (10), EB/X ratio (0.7), Expecially, B/T ratio in Daegu was similar as the other cities, Bangkok, Manila, and Hongkong. Comparing other cities with B/T ratio, the main sources of VOC were vehicular exhaust and emission of industrial facilities. Furthermore, BTEX correlation were evaluated at the emission sources and regional areas. Results showed that correlation coefficient values of emission sources, fuels and neighborhood of industry were significant magnitude above 0.65(p<0.01). Also, there showed highly significant correlations among BTEX. Calculated correlation coefficients of ambient air sampling sites were $0.61{\sim}0.954$ for commercial /residential area and $0.613{\sim}0.998$ for industrial area. However, they showed different correlation between commercial/residental area and industrial area. It implied that the emission sources were different from each area.