• Design & Manufacturing
• /
• 제15권1호
• /
• pp.14-20
• /
• 2021

The objective of this study is to introduce the new possibility of sensing technology based on inductive displacement sensors to monitor the status of wheel position in the hot forging process. In order to validate effectiveness of proposed sensing technology, the indirect forging force measurement with displacement sensor was applied into a typical closed hot forging die-set used for the manufacturing of flange bolts. The locations to implement the displacement sensor were selected carefully by simulating forming process and static structural. From the measurement results of the forging force change during one hot forging cycle, it was found that the proposed monitoring system can provide useful information to understand the detailed behaviors of die-set in the closed hot forging process.

• 전력전자학회논문지
• /
• 제27권3호
• /
• pp.175-179
• /
• 2022

Magnetic arc extinguishing technology is effective as an extinguishing device for low-voltage direct current (DC) circuit breakers with a resistive load of ≤4 kW. The separation distance between the magnet and the electrical contact must be shortened to increase the magnetic arc extinguishing force. However, if the magnet is installed too close to the electrical contact points, the magnet is exposed to high temperatures due to the arc current generated when the load current is cut off and the magnetism is lost. To solve this problem, the effective magnetic flux density at the electrical contact can be maintained high by placing the arc extinguishing magnet in a tandem structure with the electrical contact point between them, and the proper separation distance between the contact points and the magnet can be maintained. In addition, an electric arc extinguishing technology that emits arc energy using a series circuit of diode and resistor is used to suppress the continuous arc voltage generated by the inductive load. For the proposed circuit breaker, the breaking characteristics are analyzed through the breaking test for the DC load of the 760 V level, the load power of 4 kW, and the time constant of 5 ms, and an appropriate arc extinguishing design guideline is proposed.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권1호
• /
• pp.37-41
• /
• 2010

To limit fault current in a power system, superconducting fault current limiters (SFCLs) using high temperature superconducting (HTS) coils have been developed by many research groups so far. Non-inductive winding of HTS coils used for SFCLs can be classified into solenoid winding and pancake winding. Each of winding is expected to have different quench and recovery characteristics because the structure of solenoid winding differs from pancake winding's. Therefore it is important to the SFCLs application to investigate characteristics of each winding. In this paper, we deal with quench and recovery characteristics of four kinds of winding : solenoid winding, pancake winding without spacers, and with spacers of 2 and 4 mm thickness. In order to obtain quench and recovery parameters of coils, short circuit tests were performed in liquid nitrogen.

• Educational Technology International
• /
• 제15권2호
• /
• pp.117-141
• /
• 2014

This qualitative study investigated different interaction patterns in an online discussion. The data was collected from asynchronous discussion occurred in a graduate course. The data analysis methods include inductive analysis and mapping strategy. The results of the study suggest three layers of interaction: response sequences, interaction amongst participants, and concept map of messages. The visualization of response sequences enabled the researcher to discover complex and dynamic interaction patterns amongst participants. The many-to-many communication feature of online discussion does not always enable direct one-on-one interaction between two participants. Rather, one message contributed to multiple threads in the stream of conversation. In terms of interaction amongst participants, the interaction amongst participants, as indicated in the data, the messages also bind each participant and consequently a group(s) of participants together. It appears that the contribution of one message may not only enable a response to one participant, but also connect many participants to each other. The concept map of messages proposes that response sequences and interaction amongst participants can also be viewed between concepts within messages in the discussion. On the surface, the messages posted by individuals are linked by the system in a linear fashion as they are posted. However, the interaction extends to collaborative conversation amongst participants. Ultimately, a conceptual network of interrelated ideas including multiple perspectives is built in asynchronous discussion.

• 한국인터넷방송통신학회논문지
• /
• 제15권1호
• /
• pp.253-259
• /
• 2015

우리는 이 논문에서 교류전압원의 극성에 따라서 쌍방향으로 동작하는 반도체 변압기설계를 제시한다. 변압기는 회로 사이의 유도성 결합에 의하여 에너지를 전달하는 장치이다. 대부분의 변압기는 교류 전압에 의하여 1차 및 2차 코일로 구성된 장치이다. 우리가 제시하는 시스템은 전압신호 레벨을 두 방향으로 즉, 전원에서 부하까지 전압신호가 전달되기도 하고, 부하에서 전압원까지 전달되기도 한다. 전환하는 하나의 회로로 설계되어있다. 구성한 반도체 스위치는 NPN 트랜지스터가 교류 전압원 단자에 연결되어 있고, 에너지 저장 요소로서는 이미터 단자에 연결되어 있는 인덕터를 채택하였다. 제어 신호는 반도체의 베이스 단자에 인가된다. 제시하는 시스템은 전압신호의 진폭을 가역 방향으로 변화시킬 수 있다.

• Toxicological Research
• /
• 제11권1호
• /
• pp.15-21
• /
• 1995

Several populations of lymphocytes possess receptors for autonomic neurotransmitter, which make lymphocytes susceptible to autonomic stimulation. This study was to evaluate the functional alternation of effector cells of the immune system. Female Balb/C mice, 15-20 g, were injected with MA subcutaneously under various conditions. Mixed lymphocyte reaction (MLR) showed certain T cell subsets were affected by MA. The level of interleukin-2 (IL-2) production was inhibited due to a defect in expression of the IL-2 receptor. In mice injected with 20 mg MA/kg, 1 day before assay, phagocytosis of peritoneal macrophages showed $14.07\pm3%$, which was similar degree to 5 mg MA/kg treatment for 4 consecutive days. Phagocytosis was almost recovered to that of control after 4 day in 20 mg/kg injected mice. Maximum inhibition of plaque forming cell (PFC) occurred when MA was given early, indicating the inductive time point of antibody production was affected. The cortisol level increased in the MA treated group (0.05, 0.20, and $0.08{\mu}g$/dl for control, low, and high dose-MA treated mice, respectively). Based on these results, MA has general suppression effects on the immune systems by functional alteration of effector cells. Considering the increment of serum cortisol levels, MA partially impacts the neuroendocrine system to lead to failure of immune response.

• 한국정보통신학회논문지
• /
• 제19권4호
• /
• pp.877-887
• /
• 2015

본 논문은 열차 내에 산재한 도체 선로를 활용하여 무배선통신시스템 구축할 수 있는 통신연결장치의 설계 방법을 제시한다. 또한 여기서는 기존 선로에 직접 연결되는 전도성 연결장치와 전자기 유도현상을 이용하는 유도성 연결장치를 개발한다. 개발된 통신연결장치를 전력선에 적용하여 데이터 통신 실험한 결과, 목표 성능인 200 m 거리에서 20 Mbps급 이상의 무배선통신시스템의 구축을 실현할 수 있음을 확인하였다. 또한 내환경 시험 결과 개발된 통신연결장치는 열차의 내외부 발생될 수 있는 극심한 환경 변화에서도 안정적으로 동작하는 것으로 측정되었다. 따라서 개발된 장치는 현재 운행되고 있는 열차의 전도성 매체를 활용한 통신네트워크 구축에 유용할 것으로 판단된다.

• 대한의용생체공학회:의공학회지
• /
• 제37권5호
• /
• pp.168-177
• /
• 2016

In this paper we present an implantable pressure sensor to measure real-time blood pressure by monitoring mechanical movement of artery. Sensor is composed of inductors (L) and capacitors (C) which are formed by microfabrication and direct bonding on two biocompatible substrates (quartz). When electrical potential is applied to the sensor, the inductors and capacitors generates a LC resonance circuit and produce characteristic resonant frequencies. Real-time variation of the resonant frequency is monitored by an external measurement system using inductive coupling. Structural and electrical simulation was performed by Computer Aided Engineering (CAE) programs, ANSYS and HFSS, to optimize geometry of sensor. Ultrafast laser (femto-second) cutting and MEMS process were executed as sensor fabrication methods with consideration of brittleness of the substrate and small radial artery size. After whole fabrication processes, we got sensors of $3mm{\times}15mm{\times}0.5mm$. Resonant frequency of the sensor was around 90 MHz at atmosphere (760 mmHg), and the sensor has good linearity without any hysteresis. Longterm (5 years) stability of the sensor was verified by thermal acceleration testing with Arrhenius model. Moreover, in-vitro cytotoxicity test was done to show biocompatiblity of the sensor and validation of real-time blood pressure measurement was verified with animal test by implant of the sensor. By integration with development of external interrogation system, the proposed sensor system will be a promising method to measure real-time blood pressure.

• 한국항행학회논문지
• /
• 제19권3호
• /
• pp.237-243
• /
• 2015

본 논문에서는 전자기 유도 방식을 이용하여 무선전력전송 시스템을 구현하고 전송 효율을 측정하였다. 또한 수신부 코일의 세부 조건 변화에 따른 효율 변화를 확인하고 최적의 코일 조건을 제시하였다. 제작한 송수신부 회로를 이용하여 수신 코일 위치에 따른 전압 변화를 측정하고, 같은 위치에서 인덕턴스 값 변화에 따른 전압변화를 측정하였으며, 휴대폰 충전 시간을 측정하는 앱을 개발하여 충전 상태에 따른 무선전력전송 충전 시간을 비교하여 이를 통해 최적의 무선전력전송 시스템을 구현하고자 하였다. 개발된 전자기 유도방식을 이용한 무선전력전송 시스템은 주파수 125 kHz를 사용하며, 핸드폰 50%에서 60%까지 충전 시 유선 충전기는 16분, 무선충전기는 23분의 충전시간을 가졌다.

• 정보처리학회논문지D
• /
• 제11D권5호
• /
• pp.1205-1212
• /
• 2004

전자상거래 시스템의 보급이 활성화되기 시작하면서, 사용자의 필요와 욕구에 밀착한 적응형 전자상거래 에이전트의 필요성이 증대되고 있다. 이와 같은 적응형 전자상거래 에이전트는 사용자의 행위를 모니터하고 자동 분류하여 사용자의 취향을 학습하는 기능을 요하게 되었다. 이러한 기능을 가지는 적응형 전자상거래 에이전트를 구축하기 위해서, 본 논문에서는 사용자 개인의 관심정보와 선호하는 상품에 대한 호감도를 고려한 적응형 전자 상거래 에이전트 시스템을 제안한다. 제안하는 시스템은 사용자의 구매 행위에 적응력을 가질 수 있도록 보다 정확한 사용자 프로파일을 구축하고, 이와 같은 사용자 프로파일을 기반으로 사용자에게 불필요한 검색과정 없이 필요한 상품 정보를 제공 할 수 있도록 한다. 본 시스템에서는 모니터링을 통하여 사용자 의도를 파악하는 모니터 에이전트, 사용자의 행동성향을 학습 한 후 행동 패턴이 유사한 그룹을 참조하는 유사도 참조 에이전트, 사용자의 행위의 변화에 따른 개인화된 행동 DB를 구축할 수 있는 관심 추출 에이전트로 구성하였다.