• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.1
• /
• pp.80-85
• /
• 2003

Recently, induction heating cooker(IH-Cooker) is very interested for high efficiency, the quickness of heating time and the convenient regulation of heating spot. In this paper, we proposed the magneto-thermal analysis of an induction heating cooker(IH-Cooker) as an efficient design, and analyzed the magnetic fold intensity inside the axisymmetric shaped cooker using three-dimensional axisymmetric finite element method(Flux2D) and the effectual heat source was obtained by ohmic losses from eddy currents induced in the cooker. Also, we presented the temperature characteristics of the IH-Cooker according to input frequency and relative permeability in stainless parts and in aluminum parts.

• Journal of Magnetics
• /
• v.15 no.3
• /
• pp.123-127
• /
• 2010

The use of a cooling fan in an induction cooker raises a reliability issue due to the attraction of dust causing a malfunction of the cooling fan and also increases the noise level and power consumption of the device. The purpose of this study is to attempt to solve these problems by molding the Cu coil of an induction cooker with polymer composites that have a low electrical conductivity but a high thermal conductivity. Among the several polymer composites tested in this study, an aluminum nitride-based composite showed the best performance. The results show that the new induction cooker with the molded composite can operate for an extended period of time without the use of a cooling fan. A further advantage of this new type of induction cooker is that the temperature of the substance in the cooking pot increases more rapidly, indicating an increased efficiency of the induction cooker.

• The Korean Journal of Food & Health Convergence
• /
• v.5 no.4
• /
• pp.19-23
• /
• 2019

In recent years, the Internet was a lot of information on the use of Tesla coils bifilar [1] in conjunction with induction cooker, for "free" electricity during power resistive load, including different incandescent lamps. With the development of scientific and technological progress, the demand for electricity in each year is increasing, and at the same time, the need to increase the capacity of electricity production, which entails large investments and, consequently, increase of prices for consumers. As before today, the search for free electric energy is an up-to-date and still open topic. The purpose of research - simplification of information on the possibility of using bifilar coils as an electric current source in conjunction with induction cooker. Consequently, it can be concluded from the above that the use of Tesla coils in combination with induction cooker has very low k.k.d. and it is not possible to obtain excessive electric energy using the Tesla coil under the connection schemes considered.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.28-30
• /
• 2019

본 논문은 차량용 12V 배터리 전원을 이용한 캠핑용 Induction Cooker를 설계한다. 캠핑용 Induction Cooker의 전력변환장치에 적합한 DC-link 전압 (V_DC) 및 동작 주파수(f_sw)를 선정하기 위해 각 조건에 따른 전력변환장치의 공진 네트워크를 설계한다. 또한 이론적 분석 및 시뮬레이션을 통해 각 조건별 전력반도체 소자에서 발생하는 손실 비교 분석을 수행한다. 분석 결과를 통해 공진 네트워크의 적합한 V_DC 및 f_sw를 선정한다.

• Journal of Magnetics
• /
• v.16 no.1
• /
• pp.31-35
• /
• 2011

A silica aerogel sheet with a very low thermal conductivity is used to suppress the temperature increase of the Cu coil in an induction cooker by reducing the heat flow from the heat source (cooking pot). It is found that the temperature of the Cu coil is reduced significantly by the insertion of an insulation sheet between the heat source and the Cu coil, demonstrating the effectiveness of the insulation sheet in the suppression of the heat flow between the cooking pot and the coil. Furthermore, the temperature of the cooking pot increases more rapidly with the use of the insulation sheet, allowing for an increased efficiency of the induction cooker.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1251-1264
• /
• 2018

The systematic and effective design method of a Class-D current-source resonant inverter for use in an induction cooker with zero-ripple line current is presented. The design procedure is based on the principle of the Class-D current-source resonant inverter with a simplified load network model that is a parallel equivalent circuit. An induction load characterization is obtained from a large-signal excitation test-bench based on parallel load network, which is the key to an accurate design for the induction cooker system. Accordingly, the proposed scheme provides a systematic, precise, and feasible solution than the existing design method based on series-parallel load network under low-signal excitation. Moreover, a zero-ripple condition of utility-line input current is naturally preserved without any extra circuit or control. Meanwhile, a differential-mode input electromagnetic interference (EMI) filter can be eliminated, high power quality in utility-line can be obtained, and a standard-recovery diode of bridge-rectifier can be employed. The step-by-step design procedure explained with design example. The devices stress and power loss analysis of induction cooker with a parallel load network under large-signal excitation are described. A 2,500-W laboratory prototype was developed for $220-V_{rms}/50-Hz$ utility-line to verify the theoretical analysis. An efficiency of the prototype is 96% at full load.

• Journal of Power Electronics
• /
• v.17 no.4
• /
• pp.892-904
• /
• 2017

A design of a Class-E inverter with only one inductor and one capacitor is presented. It is operated at the optimal operation mode for domestic cooker. The design principle is based on the zero-voltage derivative switching (ZVDS) of the Class-E inverter with a parallel load network, which is a parallel resonant equivalent circuit. An induction load characterization is obtained from a large-signal excitation test bench, which is the key to an accurate design of the induction cooker system. Consequently, the proposed scheme provides a more systematic, simple, accurate, and feasible solution than the conventional quasi-resonant inverter analysis based on series load network methodology. The derivative of the switch voltage is zero at the turn-on transition, and its absolute value is relatively small at the turn-off transition. Switching losses and noise are reduced. The parameters of the ZVDS Class-E inverter for the domestic induction cooker must be selected properly, and details of the design of the components of this Class-E inverter need to be addressed. A 1,200 W prototype is designed and evaluated to verify the validation of the proposed topology.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.157-159
• /
• 1996

For the optimal design of the induction heating cooker, precise and accurate analysis of the magnetic field inside the jar must be achieved first. Until now, design methods based on experience has been used in industry field. But this takes a lot of trial and error, high cost and also long development time. So the analysis of the magnetic field distribution is very important. In this paper the magnetic field inside the induction heating cooker is analyzed by using axisymmetrical FEM(finite element method). And the method of the coil location design for the optimal heat source distribution using sensitivity analysis is developed. In addition, the shielding effect of the non-axisymmetrical 3-D ferrite structure used in induction heating cooker is also analyzed by the integral method.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.4
• /
• pp.375-379
• /
• 2013

In this paper, the magnetic coupling between an induction cooker and a metallic pot is studied for various winding topologies. Effects of the winding orientation on the power transfer capability and on the emitted magnetic field under the cooker are discussed and compared. A novel topology inspired by permanent magnet Halbach array is proposed. This consists in coupling in both horizontal and vertical directions and to create an asymmetric field in order to reduce the emission under the cooker.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.39-40
• /
• 2017

본 논문에서는 자성체 및 비자성체 용기 가열이 모두 가능한 Induction Cooker 스위칭 소자를 선정한다. 비자성체 용기 가열 시 스위칭 소자에서 발생하는 손실, 열 저항 및 방열판의 온도를 통해 Package Type에 따른 접합 온도를 계산하여 스위칭 소자를 선정하고 실험을 통해 선정한 스위치의 적합성을 검증한다.