• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.140-142
• /
• 2005

This paper describes the current- based compact digital motor protective relay for low and high voltage induction motors, which are widely used in industrial and commercial power systems. The existing protective relays for motor protection had only overload, short circuit, reverse phase, open circuit and grounding protective elements, and measurement, start/stop control function. But in present day, for automation system, various functions are required, especially motor management and sequence control function and more. To meet these requirements, we developed an economic current-based compact digital motor protective relay which had various function to control, manage and monitor the induction motor.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.2
• /
• pp.3-9
• /
• 2012

The paper describes a novel technique for on line parameter identification of three-phase induction motors from a single, run up to speed test. Data is sampled during this test with the normal locked rotor and synchronous speed data captured on the way to reaching the motor's rated speed. Rotor parameter variations with frequency due to skin and proximity effects and other non-linear imperfections such as heating and main flux path saturation are taken into account. This method is ideal for determining and/or verifying parameters used in high performance drives.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.377-381
• /
• 1999

This paper presents a implementation of digital motion control system for induction motor vector drives using the 16bit DSP TMS320F240. The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent controllers for induction motors which can be yield enhanced operation, fewer system components, lower system cost, increased efficiency and high performance. The system presented are speed and current sensing, sine look-up table and generated SVPWM by fully integrated control software. The developed system in a implementation are shown a good speed response characteristic results and high performance features. The system can be adapted variform motor drive system.

• Journal of Power Electronics
• /
• v.10 no.1
• /
• pp.65-71
• /
• 2010

This paper presents the design and implementation of voltage source inverter type SVPWM based speed control of an induction motor using a fuzzy PI controller. This scheme enables us to adjust the speed of the motor by controlling the frequency and amplitude of the stator voltage; the ratio of the stator voltage to the frequency should be kept constant. A model of the fuzzy control system is implemented in real time with a Xilinx FPGA XC3S 400E. It is introduced to maintain a constant speed to when the load varies.

• Proceedings of the KIEE Conference
• /
• 2000.07e
• /
• pp.79-84
• /
• 2000

This paper presents an implementation of digital position control system for an induction motor vector drives by a direct torque control(DTC) using the 16bit DSP TMS320 F240. The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent controller for motors which can be yield enhanced operation, fewer system components, lower system cost, increased efficiency and high performance. The system presented are stator flux and torque observer using current model that inputs are current sensing of motor terminal and rotor angle for a low speed operating area, two hysteresis controller, optimal switching look-up table, and IGBT voltage source inverter by fully integrated control software. The developed control system are shown a good motion control response characteristic results and high performance features using 2.2Kw general purposed induction motor.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2770-2772
• /
• 1999

This paper discusses the basic principle of vector control applied to induction motors. A indirect strategy for impressed stator currents control is used for system modeling. IRFOC for induction motor was modelled using "Matlab with Simulink" IRFOC be applied to 15kW induction motor is simulated in different conditions; step changes in torque at a fixed reference speed, and cyclic change of speed reference. Simulation result considering the variation of stator, rotor resistance includes the response of speed, torque and rotor d-q fluxes.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2556-2558
• /
• 1999

We present voltage-source inverter for variable speed of washing machine. In the case of previous washing machines only on/off contol of motor was satisfied but these days the desire of customers moves to more silent and energy saving machine. Therefore many white goods manufacturers consider variable driving methods of motor. Nowadays variable speed Induction motors powered by inverters are becoming more and more popular. In this paper the principles of constant V/F control of Induction motor used in washing machine and space vector PWM technique are reviewd. Implementation issues such as command voltage generation, switching pattern determination, speed and power measurement are also presented. Experimental results are included in the end of the paper.

• Journal of Mechanical Science and Technology
• /
• v.20 no.7
• /
• pp.929-940
• /
• 2006

Early detection and diagnosis of incipient induction machine faults increases machinery availability, reduces consequential damage, and improves operational efficiency. However, fault detection using analytical methods is not always possible because it requires perfect knowledge of a process model. This paper proposes a neural network based expert system for diagnosing problems with induction motors using vibration analysis. The short-time Fourier transform (STFT) is used to process the quasi-steady vibration signals, and the neural network is trained and tested using the vibration spectra. The efficiency of the developed neural network expert system is evaluated. The results show that a neural network expert system can be developed based on vibration measurements acquired on-line from the machine.

• Journal of Power System Engineering
• /
• v.3 no.2
• /
• pp.70-78
• /
• 1999

The vector controlled induction motor(I.M) with speed sensor has been widely used for variable speed drive systems. In these application fileds, speed sensorless control are expected strongly to progress reliability, simplicity and cost performance of I.M and to expand its application part. This paper describes a novel speed sensorless control method of I.M based on feedforward quick torque response control technique. Especially, this paper aimed at the realization of sensorless control in the very low speed region, The proposed method can be formulated simply from a motor circuit equation and conducted easily by detecting primary motor currents and a voltage command at every sampling time. Throughout some results of numerical simulations with the assumption of using a pulse width modulation(PWM) voltage source inverter, the validity of the method was successfully confirmed.

• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.2
• /
• pp.85-91
• /
• 2000

This paper proposes a novel method with pseudo-on-line scheme using the optimized look-up table based on the genetic algorithm which does not use the gradient and finds the global optimum of an un-constraint optimization problem. The technique is a pseudo-on-line method that optimally estimates the parameters of fuzzy PID(FPID) controller for systems with non-linearity, using the genetic algorithm. The proposed controller(GFPID) with the auto-tuning function is applied to the on-line and real-time control of speed at 3-phase induction motor, and its computer simulation is carried out. simulation results show that the proposed methodis more excellent that conventional FPID and PID controllers.