• Title/Summary/Keyword: Induction Coefficient

Search Result 107, Processing Time 0.027 seconds

An Analysis on the Economic Impact of China's Education Industry (중국 교육산업의 경제적 파급효과에 대한 분석)

  • Sang, Li;Zhang, Yizhou;Zhang, Mengze
    • The Journal of the Korea Contents Association
    • /
    • v.21 no.9
    • /
    • pp.299-311
    • /
    • 2021
  • The purpose of this study is to analyze the ripple effect of the Chinese education industry on the national economy by using the industry-related table of 2017 by the China Statistical Office to use it as policy data for revitalization of the Chinese education industry in the future. To achieve this purpose, 149 industries in the basic classification of the industry-related table were classified into 32 industries. Based on these classifications, by analyzing the production induction coefficient, sensitivity coefficient, influence coefficient, yield inducement coefficient, production tax induction coefficient, and labor induction coefficient, etc. The purpose of this study is to understand the relationship between different industries and to find out the economic impact of the Chinese education industry. The analysis results show that in 2017, the total production induction coefficient of China's education industry was 1.7188, the row total was 1.0626, the sensitivity coefficient was 0.01211, the influence coefficient was 0.01958, the income induction coefficient was 0.6667, the production tax induction coefficient was 0.035, and the final demand was 1 billion yuan. When this occurs, the labor induction coefficient shows a total of 31,254 persons (indirect 15,541 persons, direct 15,713 persons). Based on the analysis results, this study suggested the implications that government support, technology introduction and application of new operating models, policy regulations, and efficient supervision of the system and president are required for further development of the Chinese education industry.

Method of Optimum Efficiency to Coefficient of Utilization for Single Phase Induction Motor (단상 유도전동기의 이용률 변동에 대한 최적효율 산정기법)

  • Kim, Yang-Ho;Kim, Young-Sun
    • The Transactions of the Korean Institute of Electrical Engineers P
    • /
    • v.55 no.4
    • /
    • pp.155-160
    • /
    • 2006
  • In this paper, deduced suitable optimization to request output condition after taking closely characteristic data of single phase induction motor(SIM) which is the possibility becoming economic is coming to be demanded. Motor proper move connection data took advantage of result of existing data and iron loss and copper loss, mechanical loss took advantage of statistical data, and decide motor move laking advantage of saving data and secondary resistance and optimum purpose of method that is proposed through single phase induction motor and comparison performance evaluation having on the same output parameter. That decide material factor, electric power damage ratio, and coefficient of utilization for optimum function by method that search request output and optimum values of efficiency case by case and decided is proper that is saved after take magnetizing reactance relationship. This research result which it sees against a material expense with use coefficient of utilization which is included in loss expense decides the same plan variable back the place efficiency is useful and will be applied.

Speed Sensorless Torque Monitoring Of Induction Spindle Motor On Machine Tool (공작기계 주축 유도전동기의 속도 센서리스 토크 감시)

  • 홍익준;권원태
    • Proceedings of the Korean Society of Machine Tool Engineers Conference
    • /
    • 2002.10a
    • /
    • pp.18-23
    • /
    • 2002
  • In this paper, The torque of CNC spindle motor during machining is estimated without speed measuring sensor. The CNC spindle system is divided into two parts, the induction spindle motor part and mechanical part. In mechanical part the variation of the frictional force due to the increment of the cutting torque and the effect of damping coefficient is investigated. Damping coefficient is found to be a function of spindle speed and not influenced by the weight of the load, while frictional force is a function of both the cutting torque and spindle speed. Experimental formulars are drawn for damping coefficient as a function of spindle speed and frictional force as a function of both cutting torque and spindle speed respectively, to estimate the cutting torque accurately. Graphical programming is used to implement the suggested algorithm, to monitor the torque of an induction motor in real time. Torque of the spindle induction motor is well monitored with 3% error range under various cutting conditions.

  • PDF

A Study on the Parameters and Characteristics of Induction Motor Driven by Inverter (인버터로 구동되는 유도전동기의 정수 및 특성에 관한 연구)

  • 전내석;김종윤;오진석;김윤식
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.24 no.6
    • /
    • pp.34-42
    • /
    • 2000
  • In this paper conventional technique will be described, which can be used for the measuring various parameters of induction motor. This is followed by presenting some other, alternative, techniques. The two tests are described which are suitable to obtain the electrical parameters of symmetrical 1hp three-phase squirrel-cage induction motor. These are the blocked rotor test and no load test. By the application of these, it is possible to determine the parameters which are presented in the steady-state equivalent-circuit of determining an induction motor. One conventional method of determining the inertia of an induction motors is obtained by performing retardation tests. The angular rotor speed of the motor is monitored, following its disconnection from the stator supply. Since the inertia torque J dw/dt contains the inertia coefficient J and the friction and windage torque Bw contains the coefficient B, then J and B can be determined by performing retardation tests.

  • PDF

Development of the 3-D Bulk Motion Index for In-Cylinder Flow Induced by Induction System (II) - Based on the Steady Flow Rig Test Results - (흡기시스템을 통해 실린더로 유도되는 공기의 3차원 Bulk Motion Index 개발 (II) - 정상유동실험결과를 중심으로 -)

  • Yun, Jeong-Eui;Nam, Hyeon-Sik;Kim, Myung-Hwan;Min, Sun-Ki;Park, Pyeong-Wan;Kim, Ki-Seong
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.30 no.11 s.254
    • /
    • pp.1066-1073
    • /
    • 2006
  • Recently, because the variable induction systems are adopted to intake system, in-cylinder flow induced by induction system is very complex. Therefore it is very difficult to describe the in-cylinder bulk flow characteristics using the conventional swirl or tumble coefficient. In this study, in order to clarify the 3-D angular flow characteristics of in-cylinder bulk motion in the developing process of variable induction system, we introduced the new 3-D angular flow index, angular flow coefficient($N_B$) Finally, to confirm the index, we carried out the steady flow rig test for intake port of test engine varying valve lift on the test matrix.

Earth Reflection Effect Analysis in the Environment of Line Source Induction (전력선 유도 환경에서의 지면 반사계 영향 분석)

  • Lee, Sangmu
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.50 no.4
    • /
    • pp.26-32
    • /
    • 2013
  • The earth reflection effect on the induced voltage by line source such as power line occurring induction inteference is analyzed to scrutinize how much it would reduce the induced voltage. Using hankel transformation including bessel function, directly calculation formulae for extracting a refelction coefficient is a most important technical application in this paper since the reflection coefficient on the earth cannot be deduced by a general coefficient calculation formulae according to a plain wave. The electric field is utilized to transform the electromagnetic field into an induced voltage. The composed efficiency to a source induction voltage by an earth reflection is about a range of 60~70% for the axis constellation of each object like observation point, source position and other material parameters.

A Study on discharge gas of Fluorescent Induction Lamp (무전극 램프의 방전가스 연구)

  • Kim, Keun;Jeon, Byung-Hoon
    • Proceedings of the KIEE Conference
    • /
    • 2009.07a
    • /
    • pp.1481_1482
    • /
    • 2009
  • Pure Xe, Kr and Ne atoms and Mixures of Xe-Ne used in fluorescent induction lamps(FILs). However standard regulation of FILs is not made up until now. Therefore, the electron transport coefficients, the electron drift velocity W, the longitudinal diffusion coefficient NDL and the ionization coefficient $\alpha$/N in pure Xe, Kr, Ne gases and Xe-Ne mixtures(1:9, 5:5, 7:3) were calculated over the wide E/N range from 0.01 to 500 Td at 1 Torr by two-term approximation of the Boltzman equation.

  • PDF

A Study on Economic Impact Analysis of REITs Distribution Industry (리츠 유통산업의 경제적 파급효과에 관한 연구)

  • Choi, Cha-Soon
    • Journal of Distribution Science
    • /
    • v.13 no.12
    • /
    • pp.85-94
    • /
    • 2015
  • Purpose - The purpose of this paper is to provide a political registration point for analyzing the economic impacts on the national economy from the REITs distribution industry in our country. The REITs distribution industry was introduced in 2001 to accelerate the corporate restructuring process and advance the real estate market. During its establishment, the REITs distribution industry faced difficulties; however, the industry grew rapidly through interest from institutional investors, thus mitigating the establishment problems by 2006. In Korea, more than 108 REITs were operating as of the end of June 2015. REITs contribute significantly to the national economy. The economic impacts on the national economy of the REITs distribution industry was analyzed using input-output (I-O) analysis with respect to production, imports, value-added, and employment. Research design, data, and methodology - The research used an I-O analysis of the activities of the REITs distribution industry in the national economy. The I-O analysis methodology analyzes the economic effects that influence other industries with respect to one unit of external investment. The data for this analysis were the I-O table of 2013 as published by the Bank of Korea in 2014. Results - The findings of this study are as follows. First, if an external input to the REITs distribution industry is 1 won, the overall impact of the product is 1.3869 won, the import induction is 0.0002 won, and the value-added induction is 0.7656 won. A new investment of 659.9 billion won into the REITs industry was estimated to produce a gross effect of 915.2 billion won. Second, if an external input to the REITs distribution industry is 1 billion won, the employment-inducing effects are estimated at 19.6394 individuals. The employment-inducing coefficient of 19.6394 for the REITs distribution industry indicates that the industry created significant employment-more than other industries-because the coefficient was 2.2 times the 2013 industry average employment-inducing coefficient of 8.8. Third, the investment effects of the REITs distribution industry on production induction, value-added induction, and employment induction are assumed to be large in business support services, financing, communications and broadcasting, and professional, scientific, and technical services. Conclusions - The REITs distribution industry was analyzed as having a strong employment inducing, high value added effect. The REITs distribution industry is an excellent alternative for the government authority to create multilateral jobs. Because the REITs distribution industry has a significant positive impact on the national economy, it should be developed. However, the I-O methodology has restrictions with respect to the fixation and timing of the input coefficient. Follow-up research is expected to supplement the analysis method at a specific point in time.

Vehicle Running Characteristic Simulator using Induction Motor (유도전동기를 이용한 차량주행특성 시뮬레이터)

  • Byun, Yeun-Sub;Kim, Young-Chol;Mok, Jei-Kyun
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.60 no.10
    • /
    • pp.1903-1914
    • /
    • 2011
  • In this paper, we propose vehicle running characteristic simulator. The developed simulator is configured by two induction motors which are directly coupled with each other. One motor is to simulate the vehicle drive and another motor is to simulate the vehicle dynamic load including running resistance, gradient resistance and adhesive characteristics between rail and wheel. The running characteristics of vehicle are modeled by numerical formulas. These are programed by software of embedded controller. Thus, it is possible to change several running characteristics during the running test freely and instantly. To evaluate the feasibility of the simulator, the experiments on slip and adhesion coefficient are performed. Additionally the adhesion control and speed control of vehicle are tested with simulator. Experimental results show that the simulator can produce the driving characteristics similar to the vehicle system.

Speed Sensorless Torque Monitoring During Machining on CNC Lathe (CNC 선반가공 중 속도 센서리스 토크 감시)

  • Hong, Ik-Jun;Kwon, Won-Tae
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.28 no.3
    • /
    • pp.222-229
    • /
    • 2004
  • In this paper, the torque of CNC spindle motor during machining is estimated without speed measuring sensor. The CNC spindle system is divided into two parts, the induction spindle motor part and mechanical part. In mechanical part, the variation of the frictional force due to the increment of the cutting torque and the effect of damping coefficient is investigated. Damping coefficient is found to be a function of spindle speed and not influenced by the weight of the load, while frictional force is a function of both the cutting torque and spindle speed. Experimental equations are drawn for damping coefficient and Coulomb friction as a function of spindle speed. Incremental frictional torque Is also obtained as a function of both cutting torque and spindle speed. Graphical programming is used to implement the suggested algorithm to monitor the torque of an induction motor in real time. Torque of the spindle induction motor is estimated well in about average 3% error range under various cutting conditions.