• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1171-1177
• /
• 2011

A high power laser beam focused on a small area accelerates a thin material that flies and hits other target material in which a shock wave may be induced. This laser induced shock experimental method is more repeatable and cheaper but worse than other experimental method using gas gun or other apparatus. An optical system including a phase zone plate reduces the interference and also makes the focused-beam-intensity distribution uniform. We wrote a computer code that calculates light ray traces. Using the code we designed and fabricated an optical system including a phase zone plate and improved the laser-beam uniformity. We introduce preliminary experimental results of laser induced shock of the samples such as aluminum and other materials.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2686-2697
• /
• 1994

When a railway train enters a tunnel at high speed, a compression wave is formed in front of the train and propagates along the tunnel. The compression wave subsequently emerges from the exit of the tunnel, which causes an impulsive noise. In order to estimate the magnitudes of the noises and to effectively minimize them, the characteristics of the compression wave propagating in a tunnel must be understood. In the present paper, the experimental and analytical investigations on the attenuation and distortion of the propagating compression waves were carried out using a model tunnel. This facility is a kind of open-ended shock tube with a fast-opening gate valve instead of a general diaphragm. One-dimensional flow model employed in the present study could appropriately predict the strength of the compression wave, Mach number and flow velocity induced by the compression wave. The experimental results show that the strength of a compression wave decreases with the distance from the tunnel entrance. The decreasing rate of the wave strength and pressure gradient in the wave is strongly dependent on the strength of the initial compression wave at the tunnel entrance.

• 대한수학회논문집
• /
• 제15권1호
• /
• pp.155-172
• /
• 2000

Mode interactions at Unstable fluid interfaces induced by a shock wave (Richtmyer-Meshkov Instability) are studied both analytically and numerically. The analytical approach is based on a potential flow model with source singularities in incompressible fluids of infinite density ratio. The potential flow model shows that a single bubble has a decaying growth rates at late time and an asymptotic constant radius. Bubble interactions, bubbles of different radii propagates with different velocities and the leading bubbles grow in size at the expense of their neighboring bubbles, are predicted by the potential flow model. This phenomenon is validated by full numerical simulations of the Richtmyer-Meshkov instability in compressible fluids for initial multi-frequency perturbations on the unstable interface.

• 한국전산유체공학회지
• /
• 제2권2호
• /
• pp.59-72
• /
• 1997

A numerical model is constructed to simulate the interactions of oblique shock wave / turbulent boundary layer on a strongly heated wall. The heated wall temperature is two times higher than the adiabatic wall temperature and the shock wave is strong enough to induce boundary layer separation. The numerical diffusion in the finite volume method is reduced by the use of a higher order convection scheme(UMIST scheme) which is a TVD version of QUICK scheme. The turbulence model is Chen-Kim two time scale model. The comparison of the wall pressure distribution with the experimental data ensures the validity of this numerical model. The effect of strong wall heating enlarges the separation region upstream and downstream. In order to eliminate the separation, wall suction is applied at the shock foot position. The bleeding slot width is about same as the upstream boundary layer thickness and suction mass flow is 10% of the flow rate in the upstream boundary layer. The final configuration of the shock reflection pattern and the wall pressure distribution approach to the non-viscous value when wall suction is applied.

• 한국레이저가공학회지
• /
• 제5권2호
• /
• pp.9-15
• /
• 2002

Basic principles and unique characteristics of laser-induced shock cleaning have been described compared to a conventional laser cleaning method and the removal of small tungsten particles from silicon wafer surfaces was attempted using both methods. It was found that the conventional laser cleaning was not feasible to remove the tungsten particles whereas a successful removal of the particles was carried out by the laser-induced shock waves. From the quantitative analysis using a surface scanner, the average removal efficiency of the particles was more than 98% where smaller particles were slightly more difficult to remove probably due to the increased adhesion force with a decrease of the particle size. It was also seen that the gap distance between the laser focus and the wafer surface is an important processing parameter since the removal efficiency is strongly dependent on the gap distance.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.186-189
• /
• 2000

In this paper, the relation between the vibration and the sound radiated due to the piezoelectric ESWL (Extra-corporeal Shock Wave Lithotripter) is examined And the relation between the focus and the vibration of the objects is examined. The same experiments with the objects that can be breton are done and the relation between the vibration and the break efficiency of the phantom is experimentally investigated. These results show that the relativity between the power of the peak frequency and the break efficiency can be confirmed.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.97-99
• /
• 2012

A pressure-based BOIK model considering Shock to Detonation Transition(SDT) and damage due to external fragment or bullet stimuli impact on energetic materials and analytical approach for determination of free parameters are proposed. The rate of product mass fraction(${\lambda}$) consists of ignition term that represents the initiation due to shock compression and growth term that describes propagation of detonation wave and strain term representing the morphological deformation induced by external impact.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.397-400
• /
• 2010

충격파 유도 연소장에서의 적응격자기법의 유용성을 확인하기 위하여 화학반응식을 포함한 2차원 Euler 방정식을 이용하여 삼각형 비정렬 적응격자계에서 계산을 수행하였다. 2차원 쐐기형상에 대하여 냉가스 및 열가스 유동 해석을 수행하였다. 적응격자를 이용하여 경사충격파에서 폭굉파로의 천이를 잘 관찰 할 수 있었고, 유도영역, 천이영역, 폭굉영역 등의 특성을 잘 모사하는 것을 확인 할 수 있었다. 본 연구를 통하여 연소장이 포함된 고속압축성 유동장에서의 비정렬 적응격자의 유용성을 확인 할 수 있었다.

• 한국음향학회지
• /
• 제25권1호
• /
• pp.43-48
• /
• 2006

압전식 충격파 쇄석기를 사용하여 대상물을 파쇄하는 과정에서 발생하는 음의 특성을 조사한 결과, 대상물이 파쇄됨에 따라 방사음이 더욱 저주파대로 이동한다는 실험적인 결과가 발표되었고(2), 이 결과를 입증하기 위하여 실제의 대상물이 파쇄되어가는 과정을 모델링하여 제작한 대상물을 사용한 실험에서도 동일한 결과가 관측되었다. 본 논문에서는 이와 같이 실험적으로 밝혀진 연구결과를 이론적으로 확인하고자 한다. 따라서, 유한요소법을 이용한 수치 시뮬레이션을 실험과 유사하게 모델링한 대상물에 실행하였고, 시뮬레이션에서 관측된 결과를 제시하여 실험적으로 관측된 결과가 이론적으로도 유효하다는 것을 입증하였다.

• 한국음향학회지
• /
• 제19권5호
• /
• pp.35-40
• /
• 2000

본 연구에서는 먼저 압전형 쇄석기에 의한 충격파 조사시에 발생하는 파쇄대상물의 진동과 그 때 들려오는 방사음과의 관계에 대하여 검토한다. 다음에 대상물에 있어서의 초점위치와 고유진동과의 관계에 대해서도 조사한 결과를 제시한다. 아울러 동일한 실험을 파쇄가능한 대상물에 시행하여 대상물의 진동과 그 파쇄효율과의 관계에 대해서도 실험적으로 검토한다. 그 결과, 초점위치에 따른 대상물 고유진동의 피크 주파수 파워와 파쇄효율과의 상관성을 명확히 확인할 수 있었다.