• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.869-875
• /
• 2009

Safety is a big issue in the construction sites. For safe and secure management, tracking locations of construction resources such as labors, materials, machineries, vehicles and so on is important. The materials, machineries and vehicles could be controlled by computer, whereas the movement of labors does not have fixed pattern. So, the location and movement of labors need to be monitored continuously for safety. In general, Global Positioning System(GPS) is an opt solution to obtain the location information in outside environments. But it cannot be used for indoor locations as it requires a clear Line-Of-Sight(LOS) to satellites Therefore, indoor location monitoring system could be a convenient alternative for environments such as tunnel and indoor building construction sites. This paper presents a case study to investigate feasibility of Wi-Fi based indoor location monitoring system in construction site. The system is developed by using fingerprint map of gathering Received Signal Strength Indication(RSSI) from each Access Point(AP). The signal information is gathered by Radio Frequency Identification (RFID) tags, which are attached on a helmet of labors to track their locations, and is sent to server computer. Experiments were conducted in a shield tunnel construction site at Guangzhou, China. This study consists of three phases as follows: First, we have a tracking test in entrance area of tunnel construction site. This experiment was performed to find the effective geometry of APs installation. The geometry of APs installation was changed for finding effective locations, and the experiment was performed using one and more tags. Second, APs were separated into two groups, and they were connected with LAN cable in tunnel construction site. The purpose of this experiment was to check the validity of group separating strategy. One group was installed around the entrance and the other one was installed inside the tunnel. Finally, we installed the system inner area of tunnel, boring machine area, and checked the performance with varying conditions (the presence of obstacles such as train, worker, and so on). Accuracy of this study was calculated from the data, which was collected at some known points. Experimental results showed that WiFi-based indoor location system has a level of accuracy of a few meters in tunnel construction site. From the results, it is inferred that the location tracking system can track the approximate location of labors in the construction site. It is able to alert the labors when they are closer to dangerous zones like poisonous region or cave-in..

• Journal of Internet Computing and Services
• /
• v.7 no.3
• /
• pp.71-82
• /
• 2006

This paper propose a realtime tracking algorithm of mobile object in indoor environment. this proposed system selects location data closer to mobile objects in real time that are results of Triangulation method and DCM(Database Correlation Method)method. Also, this system applies adjusted location data selected by using Kalman filter, and in result it improved location accuracy of transfer object. Be studied in existing the Kalman filter have unstable location data until its settlement because of it extracts current values by using the past the information. However, proposed location tracking system don't apply existent Kalman filter to this system and it permits precisional tracking location by uses more effective methods.

• Journal of Advanced Navigation Technology
• /
• v.19 no.1
• /
• pp.74-79
• /
• 2015

In this paper, in order to improve the error is utilized to location tracking the smart sensor detects a walking information user, RSSI is to provide an indoor position tracking system that is capable of correcting an error in terms weak. The acceleration sensor is able to detect the activity in the user walking and detects the number of step and the moving distance using the same. The Direction sensor is utilized as a digital compass, to detect the moving direction of the user. As a result of detecting the walking information using the sensor, it can be showed that this proposed indoor positioning system has a high degree of accuracy for the number of steps and the movement direction. Therefore, this paper shows that the proposed technique can correct the error of the location information to be problem in the conventional indoor location system which uses the only Wi-Fi APs by estimating the user's movement direction and distance using the sensors in smartphone without an additional equipment and cost.

• The Journal of Information Systems
• /
• v.17 no.1
• /
• pp.131-153
• /
• 2008

So many location based service systems, including automobile navigation system logistic management, taxi fleet management, and so on, are being used everywhere. However, these are all outdoors. This paper provides a stepping stone for commercial indoor location based services by developing an integrated system of our indoor positioning and map viewer modules. For the indoor positioning, we propose WLAN (Wireless Local Area Network) based EKF (Extended Kalman Filter) which estimates user's current location and tracts user's trace in the sequence of time. Our map viewer renders a map recorded in an Autocad DXF file and provides functions of map manipulation such as zoom-in, zoom-out, and move. We integrate our indoor positioning and map viewer modules and discuss the experimental results of the integrated system.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.211-217
• /
• 2019

Location positioning systems are available in applications such as mobile, robotic tracking systems and Wireless location-based service (LBS) applications. The GPS system is the most well-known location tracking system, but it is not easy to use indoors. The method of radio frequency identification (RFID) location tracking was studied in terms of cost-effectiveness for indoor location tracking systems. Most RFID systems use active RFID tags using expendable batteries, but in this paper, an inexpensive indoor location tracking system using passive RFID tags has been developed. A pattern matching method and a system for tracing location by generating regression curves were studied to use precision tracking algorithms. The system was tested by verifying the level of error caused by noise. The three-dimensional curves are produced by the regression equation estimated the statistically meaningful coordinates by the differential equation. The proposed system could also be applied to mobile robot systems, AGVs and mobile phone LBSs.

• Journal of Multimedia Information System
• /
• v.8 no.1
• /
• pp.11-16
• /
• 2021

This study developed a design to estimate the location of rescue demander using the sound system at disaster site, in the conditions of indoor positioning cannot be performed properly. It is a location tracing system through smart phone application. It generates sound wave information of rescuer at the rescue site, and it can be used as assistant means for indoor location tracing at the disaster site using sound wave receiving measurement technology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4B
• /
• pp.300-308
• /
• 2012

Many indoor location tracking technologies have been proposed. Generally indoor location tracking using TOA signal is used, there is a weak point that it's difficult to track the location due to obstacles like a refraction, reflection and dispersion of radio wave. In this paper, we apply ETOA(Estimated-TOA) algorithm in NLOS(Non-Line-Of-Sight) environment to solve above problem. In NLOS environment, TOA value between Beacon and Mobile node is predicted by ETOA algorithm and the tracking of indoor location is also possible to identify using two NLOS beacons of three beacons by this algorithm. We show that the proposed algorithm is accurate location tracking is accomplished using the applying the proposed algorithm to indoor moving robot and the inertia sensor of robot and Kalman filter algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2120-2126
• /
• 2010

This paper aims to realize the location tracking system using the Zigbee in the wireless sensor network. The wireless sensor network offers the user-oriented location tracking service in the ubiquitous environment. The location tracking service can track the location of an object or a person and provides it. The location tracking system realized in this paper can be used inside or outside without any black-out areas to measure the location of the moving nodes. In tracking inside the RSSI signals use and in tracking outside will connect with the GPS signals to track the location. Also, by using Zigbee, the wireless sensor network environment was established and by obtaining the location of the moving nodes, the real-time tracking is possible.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.9 no.2
• /
• pp.48-55
• /
• 2010

This paper proposes a realtime tracking algorithm of mobile object in indoor or outdoor environment. For this purpose the proposed system selects location data closer to mobile objects in real time using Triangulation method and DCM (Database Correlation Method). Also, this system utilizes the adjusted location data selected by using Kalman filter to improve the location accuracy of transfer object. Be studied in existing the Kalman filter have unstable location data until its settlement because of it extracts current values by using the past the information. However, proposed location tracking system don't apply existent Kalman filter to this system and it permits precisional tracking location by using more effective methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1003-1006
• /
• 2009

Recently, Ubiquitous computing technology is increasing necessity for object recognition and a location tracking technology to meet various applications. The location tracking technology is the fundamental to the Context-Aware of users in Ubiquitous environment and its efficiency has to be improved using IEEE 802.15.4 ZigBee used in current infra such as ubiquitous sensor network. But because the IEEE 802.15.4 ZigBee protocol has limitation to apply location tracking technology such as ToA and TDoA, Zone-based Location Tracking technology using RSSI is needed. In this paper suggests RSSI-based 802.15.4 ZigBee local positioning protocol to support a positioning tracking service in Ubiqutous environment. And Zone-based location tracking system is designed for actual the indoor location tracking service.