• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.2 s.245
• /
• pp.202-209
• /
• 2006

As the economic power is improved and the customer's demand is hard to please, the noise and vibration is the most important yardstick that can determine the quality of the product. Especially, as the airconditioner's demand increase suddenly, the product of quality and the noise is becoming a decisive factor of determining whether purchase the product or not. Therefore, every manufactory is investing a lot of money and research to cut down the unpleasantness induced from noise and vibration. And they are emphasizing their product's difference by advertising a silence very actively. With these reason, the demand of a silent indoor air-conditioner is the essential research filed when the product is develop(:d. In this study, the noise and vibration is visualized in the space and frequency domain by using experimental methods such as operational deflection shape (ODS), modal testing and sound intensity. Also the location of noise source and its characteristic is analyzed in an acoustical point of view to reduce the structure borne noise that come from the fan motor, and the pertinent control method is suggested. Furthermore, the most suitable shape of the motor bracket is suggested by applying FEM and DOE (Design of experiments) in the noise and vibration point a view.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.131-137
• /
• 2024

Aerodynamic noise generated by the surrounding flow of a train traveling at high speed affects both outdoor and indoor noise. This study's goal is to develop a test method to measure and quantitatively evaluate aerodynamic noise through pressure perturbation data on the train surface. To accurately evaluate aerodynamic noise, it is important to separate and evaluate the compressive and incompressible pressure fluctuations mixed in the acquired surface pressure fluctuation data. This is because the noise transmission characteristics of the two pressure fluctuations are different. First, the installation length and interval of the microphone were determined to acquire surface pressure fluctuation data, and wavenumber-frequency analysis was performed to separate incompressible pressure fluctuation and compressible pressure fluctuation to obtain a sound pressure level spectrum. Finally, as a result of comparing the test results measured in the train head and trail, It was confirmed that the pressure fluctuation on the train head surface was greater than that on the tail.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.2
• /
• pp.37-44
• /
• 1993

본 연구는 올림픽 도로에 인접한 병원건물의 내외부에서 교통 소음을 동시에 측정하여 대상 병원건물에서의 교통소음 특성과 그 소음이 병원건물에 미치는 영향을 파악하고 소음 방지 대책의수립에 필요한 기초자료를 제시한다. 본 연구에서는 올림픽도로에서 발생하는 교통소음의 변동 및 분포특성, 주파수 특성, 도로교통소음으로 인한 건물실내의 소음도를 파악하였으며, 실내에서의 소음도는 ISO의 권장치를 초과하는 것으로 나타나 소음저감 대책이 필요한 것을 알 수 있었다. 본 연구는 도로주변에서의 특정건물에 대한 연구이나, 그외 건물의 소음방지대책에도 참고가 될 수 있을 것으로 사료된다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.47-55
• /
• 2008

According to the increase of power demand and expansion of downtown, it is necessary to install transformers additionally in operating substations and construct substations in residential area. But the public complaint has been increased due to the transformer noise of the substation. KEPCO has used a vibration preventing pad, various soundproof walls and an enclosure to transformers in outdoor substations, and a soundproof door, shutter and wind-path soundproof equipment in indoor substations to block the sound propagation from the transformers. But these noise reduction methods are not satisfied. It should be considered to reduce transformer noise itself. To shut out sound emitted from transformers, we developed a soundproof technology that wall up reinforcing bar by steel sheet. For the practical application of it, we analyzed the vibration characteristics of a transformer tank and reduction of noise according to soundproof plate. As a result, it is confirmed that the technology can reduce 11 [dB] of transformer noise.

• Journal of Sensor Science and Technology
• /
• v.29 no.2
• /
• pp.75-81
• /
• 2020

We introduce a new visible light communication (VLC) method in which three-level return-to-zero (RZ) modulation is used for flicker-free transmission. In the VLC transmitter, the three-level RZ modulation ensures that the average optical power is constant; thus, a flicker-free light-emitting diode (LED) light is achieved. In the VLC receiver, a resistor-capacitor high-pass filter is used for generating spike signals, which are used for data recovery while eliminating the 120 Hz optical noise from adjacent lighting lamps. In transmission experiments, we applied this method for wireless transmission of an air quality sensor message using the visible light of an LED array. This configuration is useful for the construction of indoor wireless sensor networks for air pollution monitoring using LED lights.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.639-644
• /
• 2009

This paper presents a modified CFS (Closed-Form Solution) for FLAOA (Forward Link AOA) measurements. During when the pseudo-measurement equation for FLAOA is derived, the angle measurement noise is treated more carefully in approximation. As the covariance matrix of the pseudo-measurement noise is influenced by unknown user positions and azimuth, a two-step estimation technique is used in the proposed CFS. The performance of the proposed CFS for FLAOA is compared to that of the conventional CFS for FLAOA and RLAOA (Reverse Link AOA) in a computer simulation. Simulation results show that the proposed method is potentially suitable for applications involving the localization and guidance of indoor mobile robots.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.1
• /
• pp.31-36
• /
• 2009

This paper presents a novel scalar adaptive filter, which is reformulated by additional acceleration term. The filter continuously estimates three different kinds of covariance such as the measurement noise covariance, the velocity error covariance and the acceleration error covariance. For estimating three covariances, we use the innovation method for the measurement noise covariance and the least square method for other covariances. In order to verify the proposed filter performance compared with the conventional scalar adaptive filter, we make indoor experimental environment similar to outdoor test using the ultrasonic sensors instead of GPS. Experimental results show that the proposed filter has better position accuracy than the traditional scalar adaptive filter.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.11a
• /
• pp.154-155
• /
• 2014

본 논문에서는 TV 시청환경에서의 실내소음의 스트레스 평가를 위한 소음 데이터베이스(database, DB) 설계 방법을 제안한다. 제안된 DB 는 TV 시청공간을 포함하는 실제 주거환경 내에서 binaural recording을 위한 1 개의 dummy head 와 multi-channel recording 을 위한 2 개의 다채널 마이크 배열을 활용하여 TV 콘텐츠 및 실내소음의 음향 정보를 취득한다. 설계된 DB는 TV 시청자의 청각정보에 해당하는 binaural recording 신호와 실내소음의 위치 및 종류 추정을 위한 multi-channel recording 신호를 모두 포함하기 때문에 TV 시청환경에서 실내소음이 시청자에게 유발하는 스트레스의 분석 및 평가 관련 연구에 적합하게 설계되었다. 본 DB 는 5 가지 종류의 TV 콘텐츠 10 시간 분량, 30 가지 종류의 실내소음 2 시간 분량으로 구성되었다.

• KIEAE Journal
• /
• v.3 no.4
• /
• pp.23-31
• /
• 2003

From 1998, the number of household who live in apartment house outnumber that of household live in detached dwelling by 0.3% in Korea. As walls and floors are shared with neighbourhood in apartment houses, percent complaints to the impact noise from the upper floor was so high that it represents an important factor in apartment indoor noise. And the rate is closely correlate with children's running, playing and jumping. In this study, comparisons of standard impact source, such as Tapping Machine and Bang Machine, with real life impact sources were made in order to investigate acoustical characteristics between them. Also reproducibility tests for impact sound sources were carried out.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.434-441
• /
• 2003

This paper presents a generator for stand-alone vibration monitoring system of bridge structure based on ambient vibration of bridge. In this paper, a novel electric power generator which has minimum effect of armature reaction is proposed. The related mechanical and electrical design equations are obtained and a pilot generator has been implemented. In addition, the charging system for extremely low generator current is discussed, and some improvements are identified for the system. This investigation reveals that diode characteristics of rectifier is dominant factor in the charging process. Finally, both the simulation, which uses real measurement data of the Namhae bridge as input of the pilot generator, and indoor test are carried out. The results showed the applicability and effectiveness of the stand-alone vibration powered generator.