• The Journal of Korea Robotics Society
• /
• v.15 no.3
• /
• pp.205-211
• /
• 2020

In this paper, we propose a modified ORB-SLAM (Oriented FAST and Rotated BRIEF Simultaneous Localization And Mapping) for precise indoor navigation of a mobile robot. The exact posture and position estimation by the ORB-SLAM is not possible all the times for the indoor navigation of a mobile robot when there are not enough features in the environment. To overcome this shortcoming, additional IMU (Inertial Measurement Unit) and encoder sensors were installed and utilized to calibrate the ORB-SLAM. By fusing the global information acquired by the SLAM and the dynamic local location information of the IMU and the encoder sensors, the mobile robot can be obtained the precise navigation information in the indoor environment with few feature points. The superiority of the modified ORB-SLAM was verified to compared with the conventional algorithm by the real experiments of a mobile robot navigation in a corridor environment.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.14 no.1
• /
• pp.41-48
• /
• 2014

This paper analyzes the Monte Carlo localization (MCL) method, which estimates the pose of an indoor mobile robot. A mobile robot must know where it is to navigate in an indoor environment. The MCL technique is one of the most influential and popular techniques for estimation of robot position and orientation using a particle filter. For the analysis, we perform experiments in an indoor environment with a differential drive robot and ultrasonic range sensor system. The analysis uses MATLAB for implementation of the MCL and investigates the effects of the control parameters on the MCL performance. The control parameters are the uncertainty of the motion model of the mobile robot and the noise level of the measurement model of the range sensor.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.1
• /
• pp.25-31
• /
• 2012

We propose a method for an indoor mobile robot to track user with infrared transmitter. Several infrared receivers attached around by the mobile robot enable the robot to determine the moving direction by comparing the received signal patterns. The cost of the proposed system is not only cheaper than ultrasonic system, image signal processing, RFID, and RSSI method, but also robust against environment change because any complex algorithm is not necessary. In the mobile robot, ultrasonic sensors are equipped to avoid obstacles located in the moving direction, and a simple algorithm is embedded to avoid the case of poor signal reception.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.91-94
• /
• 2001

In this paper, we proposed localization method of mobile robot using color landmark mounted on ceiling. This work is composed 2 parts : landmark recognition part which finds the position of multiple landmarks in image and identifies them and absolute position estimation part which estimates the location and orientation of mobile robot in indoor environment. In landmark recognition part, mobile robot detects artificial color landmarks using simple histogram intersection method in rg color space which is insensitive to the change of illumination. Then absolute position estimation part calculates relative position of the mobile robot to the detected landmarks. For the verification of proposed algorithm, ceiling-orientated camera was installed on a mobile robot and performance of localization was examined by designed artificial color landmarks. As the result of test, mobile robot could achieve the reliable landmark detection and accurately estimate the position of mobile robot in indoor environment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.1
• /
• pp.15-22
• /
• 2006

This paper presents an efficient localization scheme for an indoor mobile robot using RFID tags on the floor. The mobile robot carries an RFID reader at the bottom, which reads the RFID tags on the floor to localize the mobile robot. Each RFID tar on the floor stores its own absolute position which is used to calculate the position and velocity of the mobile robot. Locating the RFID tags on the floor, which constructs an intelligent sensor space, may require several factors to be considered: economics feasibility and accuracy. In this paper, the optimal allocation scheme of the RFID tags on the floor to satisfy the accuracy constraint has been proposed and verified by the experiments. Based on the RFID reading, the mobile robot navigation has been successfully demonstrated to avoid obstacles and to reach the goal within a pre-specified time.

• The Journal of Korea Robotics Society
• /
• v.4 no.4
• /
• pp.312-319
• /
• 2009

This paper proposes a low-complexity indoor localization method of mobile robot under the dynamic environment by fusing the landmark image information from an ordinary camera and the distance information from sensor nodes in an indoor environment, which is based on sensor network. Basically, the sensor network provides an effective method for the mobile robot to adapt to environmental changes and guides it across a geographical network area. To enhance the performance of localization, we used an ordinary CCD camera and the artificial landmarks, which are devised for self-localization. Experimental results show that the real-time localization of mobile robot can be achieved with robustness and accurateness using the proposed localization method.

• Journal of Construction Engineering and Project Management
• /
• v.6 no.2
• /
• pp.30-39
• /
• 2016

This research presents the development of a self-governing mobile robot navigation system for indoor construction applications. This self-governing robot navigation system integrated robot control units, various positioning techniques including a dead-reckoning system, a UWB platform and motion sensors, with a BIM path planner solution. Various algorithms and error correction methods have been tested for all the employed sensors and other components to improve the positioning and navigation capability of the system. The research demonstrated that the path planner utilizing a BIM model as a navigation site map could effectively extract an efficient path for the robot, and could be executed in a real-time application for construction environments. Several navigation strategies with a mobile robot were tested with various combinations of localization sensors including wheel encoders, sonar/infrared/thermal proximity sensors, motion sensors, a digital compass, and UWB. The system successfully demonstrated the ability to plan an efficient path for robot's movement and properly navigate through the planned path to reach the specified destination in a complex indoor construction site. The findings can be adopted to several potential construction or manufacturing applications such as robotic material delivery, inspection, and onsite security.

• Journal of Power System Engineering
• /
• v.17 no.5
• /
• pp.100-111
• /
• 2013

Indoor real-time positioning for multiple targets is required to realize human-robot symbiosis. This study firstly presents positioning accuracy on an autonomous mobile robot controlled by 3-D coordinates that is obtained by a real-time indoor positioning system with spread spectrum (SS) ultrasonic signals communicated by code-division multiple access. Although many positioning systems have been investigated, the positioning system with the SS ultrasonic signals can measure identified multiple 3-D positions in every 70 ms with noise tolerance and error within 100 mm. This system is also robust to occlusion and environmental changes. However, thus far, the positioning errors in an autonomous mobile robot, controlled by these systems using the SS ultrasonic signals, have not been evaluated as an experimental study. Therefore, a positioning experiment for trajectory control is conducted using an autonomous mobile robot and our positioning system. The effectiveness of this positioning method for robot self-localization is shown, from this experiment, because the average control error between the target position and the robot's position at 29 mm is obtained.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.1
• /
• pp.39-46
• /
• 2011

This paper presents the implementation and control of a mobile manipulator robot for indoor service. The robot has two arms for tasks and a mobile base for mobility. The robot is designed to have several characteristics. Firstly, the robot has the capability of changing the height of the robot. Secondly, the robot can be changed into a balancing mode of two contact points from mobile mode of four contact points. The robot has a balancing mode like an inverted pendulum robot as well as mobile robot mode. Lastly, as a novel concept, the robot is designed to have the capability of separating into two systems, the robot ann and the mobile robot as well. The mobile base can be separately used for a cleaning service.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.11
• /
• pp.952-959
• /
• 2016

This paper proposes a novel indoor positioning system (IPS) that uses a calibrated camera sensor network and dense 3D map information. The proposed IPS information is obtained by generating a bird's-eye image from multiple camera images; thus, our proposed IPS can provide accurate position information when objects (e.g., the mobile robot or pedestrians) are detected from multiple camera views. We evaluate the proposed IPS in a real environment with moving objects in a wireless camera sensor network. The results demonstrate that the proposed IPS can provide accurate position information for moving objects. This can improve the localization performance for mobile robot operation.