• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.160-172
• /
• 2018

The method of estimating a position using a GPS has been applied to various fields including a navigation system of an automobile. However, since it is difficult to measure GPS signals indoors, it is difficult to locate specific objects indoors such as a building or factory. To overcome these limitations, this study proposes a system for object location estimation based on Bluetooth5 for the management of materials in factories. The object position estimation system consists of a Bluetooth signal generator, a receiver, and a database server. A signal generator based on Bluetooth Low Energy(BLE) is attached to the material and a receiver is appropriately arranged inside the factory. In this study, we propose "Diagonal Survey Method", a 4 - axis survey algorithm using four receivers to reduce the error of existing trilateration method. The proposed algorithm showed good performance compared to the conventional trilateration and we verified the effectiveness of the proposed system and algorithm by performing the experiment by installing the system in the factory.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.1
• /
• pp.92-98
• /
• 2021

The noise management in the interior of the power plant is difficult because the interior is large and the noise level varies greatly from location to location. Therefore, a noise visualization system capable of analyzing the noise distribution is required in order to effectively manage the interior noise. A noise mapping system was developed that can model the inside of the turbine room and create a noise map by measuring the noise level at selected points. And in order to increase the reliability of the model, the model was modified through a method of comparing the noise map and the actual noise measurement results. Facility abnormalities can be determined through regular analysis of noise maps, and a method of effectively managing the interior noise is presented by comparing and analyzing the frequencies and levels of the current and previous noise at a specific point. By using the mapping system, it is possible to establish noise countermeasures that can improve the working environment, check the machine for abnormalities, and increase the reliability of the facility through preventive maintenance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.3
• /
• pp.242-247
• /
• 2008

As an absolute positioning system, iGS is designed based on ultrasonic signals whose speed can be formulated clearly in terms of time and room temperature, which is utilized for a mobile robot localization. The iGS is composed of an RFID receiver and an ultra-sonic transmitter, where an RFID is designated to synchronize the transmitter and receiver of the ultrasonic signal. The traveling time of the ultrasonic signal has been used to calculate the distance between the iGS system and a beacon which is located at a pre-determined location. This paper suggests an effective operation method of iGS to estimate position of the mobile robot working in unstructured environment. To expand recognition range and to improve accuracy of the system, two strategies are proposed: utilization of beacons belonging to neighboring blocks and removal of the environment-reflected ultrasonic signals. As the results, the ubiquitous localization system based on iGS as a pseudo-satellite system has been developed successfully with a low cost, a high update rate, and relatively high precision.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.449-455
• /
• 2022

In this paper, we propose a position measuring system using trilateration based on the illuminance of a light-emitting diode (LED). Three LEDs are located on the ceiling of the virtual space, and each fixed coordinate is inputted to the monitoring program, and Length to the illuminance sensor is drawn through the relational expression of the length and illuminance value from the respective LED. Based on the derived length, the trilateration method is used to find object location information in virtual space. By using the least square equation to minimize the error of the length drawn to trilateration, the error is reduced to the utmost. Unlike the existing indoor positioning system using visible light communication (VLC), the proposed system does not require synchronization between the transmitter and the receiver, so the system can be configured simply.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.655-663
• /
• 2017

With the development of ICT technology, the indoor utilization of robots is increasing. Research on transportation, cleaning, guidance robots, etc., that can be used now or increase the scope of future use will be advanced. To facilitate the use of mobile robots in indoor spaces, the problem of self-location recognition is an important research area to be addressed. If an unexpected collision occurs during the motion of a mobile robot, the position of the mobile robot deviates from the initially planned navigation path. In this case, the mobile robot needs a robust controller that enables the mobile robot to accurately navigate toward the goal. This research tries to address the issues related to self-location of the mobile robot. A robust position recognition system was implemented; the system estimates the position of the mobile robot using a combination of encoder information of the mobile robot and the absolute space coordinate transformation information obtained from external video sources such as a large number of CCTVs installed in the room. Furthermore, vector field histogram method of the pass traveling algorithm of the mobile robot system was applied, and the results of the research were confirmed after conducting experiments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.8
• /
• pp.729-738
• /
• 2006

In recent days, navigation technology becomes more important as location based service (LBS) such as E911 and telematics are considered as attractive business fields. Commercial LBS requires that navigation system should be inexpensive and available anytime and anywhere - indoors and outdoors. If we consider these requirements, it is out of question that GPS is the most favorite system in the world. However, GPS has a serious problem. The one is that GPS does not operate indoors well. This is because GPS satellites are about 20,000km above the ground so that indoor signals are too weak to be tracked in GPS receiver. And the other is that vertical accuracy is less than horizontal accuracy, because of GPS satellites' geometry. To solve these problems, many researches have been done around the world since 1990s. This paper is also one of them and we will introduce an excellent solution by use of pseudolite. Pseudolite is a kind of signal generator, which transmits GPS-like signal. So it is same as GPS satellite in ground. In this paper, we will propose the integrated navigation system of GPS and pseudolite and show the flight test results using RC airplane to proof our navigation system. As a result, we could improve the vertical accuracy of airplane into the horizontal accuracy.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.85-90
• /
• 2017

Indoor location-based services have been developed based on the Internet of Things technologies which measure and analyze users who are moving in their daily lives. These various indoor positioning technologies require separate hardware and have several disadvantages, such as a communication protocol which becomes complicated. Based on the fact that a reduction in signal strength occurs according to the distance due to the physical characteristics of the transmitted signal, RSSI technology that uses the received signal strength of the wireless signal used in this paper measures the strength of the transmitted signal and the intensity of the attenuated received signal and then calculates the distance between a transmitter and a receiver, which requires no separate costs and makes to implement simple measurements. It was applied calculating the value for the average RSSI and the RSSI filtering feedback. Filtering is used to reduce the error of the RSSI values that are measured at long distance.It was confirmed that the RSSI values through the average filtering and the RSSI values measured by setting the coefficient value of the feedback filtering to 0.5 were ranged from -61 dBm to - 52.5 dBm, which shows irregular and high values decrease slightly as much as about -2 dBm to -6 dBm as compared to general measurements.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.35-43
• /
• 2004

An arbitration method is proposed to resolve a collision and arbitrate beacon transmissions in an indoor Positioning system consisting of multiple beacons and listeners. Although two or more beacons may compete to transmit signals simultaneously, a single winner in the competition is determined autonomously through the arbitration process while they are transmitting. So, it can continue to send its data, but the others give up their transmissions during the arbitration process. As a consequence, update rate for location information and channel utilization can be improved by avoiding that all beacons fail due to a collision. Once a beacon succeeds in transmitting its signal, a low-level priority is assigned to it. And a high-level priority is allocated to a beacon which gave up its transmission during arbitration process. This will guarantee every beacon has fair transmission opportunity with the arbitration method. As no centralized control is required among beacons, a Positioning system can still be easily deployed and expanded with this arbitration method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2073-2078
• /
• 2016

Recently, there have been many research that recognize the situation using sensors. However, sensor data collection and analysis are still lacking in integration. This is because the data generated by the sensor is difficult to match in terms of metadata and units. Therefore, a methodology for efficiently using data generated from various sensors is needed. In this paper, we propose a system that recognizes the location through information generated from a moving iBeacon. This system constructs the ontology with the data that can recognize the exact position when the patient wearing iBeacon moves in the room. This maps standard items and sensor items, and stores the results of filtering the detected values as knowledge. the system can extract efficient location information by recognizing the value generated by moving the patient carrying iBeacon through the ontology. This can be applied not only to beacons but also to other sensors, and it can be applied variously according to the ontology configuration.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.488-495
• /
• 2012

The real-time indoor location technology using radio waves has been studied in a variety of environments. One of them, a ship which consists of steel structure has high reception rate but causes significant ranging error due to the reflection of radio waves. In order to reduce location measurement errors that occurs in such a environment, this paper, based on CSS of IEEE 802.15.4a, presents compensation algorithm for localization using modified bilateration and pyroelectric sensor in a ship. The proposed system reduces the number of fixed nodes by estimating the appropriate reception distance between mobile node and fixed node through the analysis of CSS characteristic in a narrow passage such as ship corridors. Also, in the corner section which the ranging errors are significantly fluctuated due to the reflection and diffraction of radio waves, we recognize the location by tracking the a moving section using modified bilateration technique and pyroelectric sensor. The experimental results show that the location accuracy and efficiency of the proposed algorithm are improved 86.2 % compared to general method.