• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.83-88
• /
• 2006

Many applications in the area of location-based services and personal navigation require nowadays the location determination of a user not only in outdoor environment but also indoor. To locate a person or object in a building, systems that use either infrared, ultrasonic or radio signals, and visible light for optical tracking have been developed. The use of WiFi for location determination has the advantage that no transmitters or receivers have to be installed in the building like in the case of infrared and ultrasonic based location systems. WiFi positioning technology adopts IEEE802.11x standard, by observing the radio signals from access points installed inside a building. These access points can be found nowadays in our daily environment, e.g. in many office buildings, public spaces and in urban areas. The principle of operation of location determination using WiFi signals is based on the measurement of the signal strengths to the surrounding available access points at a mobile terminal (e.g. PDA, notebook PC). An estimate of the location of the terminal is then obtained on the basis of these measurements and a signal propagation model inside the building. The signal propagation model can be obtained using simulations or with prior calibration measurements at known locations in an offline phase. The most common location determination approach is based on signal propagation patterns, namely WiFi fingerprinting. In this paper the underlying technology is briefly reviewed followed by an investigation of two WiFi positioning systems. Testing of the system is performed in two localization test beds, one at the Vienna University of Technology and the second at the Hong Kong Polytechnic University. First test showed that the trajectory of a moving user could be obtained with a standard deviation of about ${\pm}$ 3 m.

• Journal of Intelligence and Information Systems
• /
• v.12 no.3
• /
• pp.83-93
• /
• 2006

This paper is wireless location awareness technology using RFID. We investigates the Location of the received Signal strength reported by RF Analyses of the data are performed to understand the underlying features of location fingerprints. The system is performed factors the extreme environmental Emit signal, which consists of a unique 5000 Terminals. The Location Service have become very popular in many service industries, purchasing and distribution logistics, industry, manufacturing companies and a parking place. The Technically optimal Solution would be the storage of Intelligence information in the most common form of electronic data-carrying device in use in everyday life is the smart card based upon a contact field (telephone smart card, bank cards). The method of an indoor positioning experiment system is compared using measured Location data and a charge of service. The result of research showed the following: first, to check out the mechanism between benefit of system installation and operation of Active RFID. Second, it contributed on indoor wireless location intelligence system efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1926-1933
• /
• 2013

Many localization algorithms have been proposed for Wireless Sensor Networks (WSNs). The IEEE 802.15.4a-based location-aware-system can provide precise ranging distance between two mobile nodes. The mobile nodes can obtain their exact locations by using accurate ranging distances. However, the indoor environments contain various obstacles which cause non-line-of-sight (NLOS) conditions. In NLOS condition, the IEEE 802.15.4a-based location-aware system has a large scale location error. To solve the problem, we propose location error compensation in indoor environment by using MST-based topology control. Experimental and simulation results show that the proposed algorithm improves location accuracy in NLOS conditions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.603-605
• /
• 2021

With the expansion of the indoor service-providing robot market and the electrification of automobiles, research on autonomous driving is being actively conducted. In general, in the case of outside, the location is mainly recognized through GPS, and location positioning is performed indoors using technologies such as WiFi, UWB (Ultra-Wide Band), VLP, LiDAR, and Vision. In this paper, we introduce a system for location-positioning using LED lights with different color temperatures in an indoor environment. After installing LED lights in a simulated environment such as a tunnel, it was shown that information about the current location can be obtained through the analysis of chromaticity values according to location. Through this, it is expected to be able to obtain information about the location of the vehicle in the tunnel and the movement of the device in a room such as a warehouse or a factory.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.560-567
• /
• 2016

To solve the problem of parameter optimization in image sensor-based visible light positioning systems, theoretical limits for both the location and the azimuth angle of the image sensor receiver (ISR) are calculated. In the case of a typical indoor scenario, maximum likelihood estimations for both the location and the azimuth angle of the ISR are first deduced. The Cramer-Rao Lower Bound (CRLB) is then derived, under the condition that the observation values of the image points are affected by white Gaussian noise. For typical parameters of LEDs and image sensors, simulation results show that accurate estimates for both the location and azimuth angle can be achieved, with positioning errors usually on the order of centimeters and azimuth angle errors being less than $1^{\circ}$. The estimation accuracy depends on the focal length of the lens and on the pixel size and frame rate of the ISR, as well as on the number of transmitters used.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.277-290
• /
• 2019

The demand for indoor positioning is increasing day by day. However, the widely used positioning methods today cannot satisfy the requirements of the indoor environment in terms of the positioning accuracy and deployment cost. In the existing research domain, the localization algorithm based on three-dimensional space is less accurate, and its robustness is not high. Visible light communication technology (VLC) combines lighting and positioning to reduce the cost of equipment deployment and improve the positioning accuracy. Further, it has become a popular research topic for telecommunication and positioning in the indoor environment. This paper proposes a surface centroid TOA localization algorithm based on the VLC system. The algorithm uses the multiple solutions estimated by the trilateration method to form the intersecting planes of the spheres. Then, it centers the centroid of the surface area as the position of the unknown node. Simulation results show that compared with the traditional TOA positioning algorithm, the average positioning error of the surface centroid TOA algorithm is reduced by 0.3243 cm and the positioning accuracy is improved by 45%. Therefore, the proposed algorithm has better positioning accuracy than the traditional TOA positioning algorithm, and has certain application value.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8C
• /
• pp.731-740
• /
• 2012

To offer indoor location-aware services, the needs for efficient and accurate indoor localization system has been increased. In order to meet these requirement, we presented the BLIDx(Bidirectional Location ID exchange) protocol that is efficient localization system based on sensor network. The BLIDx protocol can cope with numerous mobile nodes simultaneously but the precision of the localization is too coarse because that uses cell based localization method. In this paper, in order to compensate for these disadvantage, we propose the fingerprint overlapping method by modifying a fingerprinting methods in WLAN, and localization system using proposed method was designed and implemented. Our experiments show that the proposed method is more accurate and robust to noise than fingerprinting method in WLAN. In this way, it was improved that low location precision of BLIDx protocol.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.9-15
• /
• 2005

Most of location systems use RF signal. Because multipath is too severe at indoor environment, RF signal are usually used in outdoor positioning such as GPS. To overcome the difficulty at indoor positioning, m positioning is recently developed and is being vigorously studied. Some standardizations on UWB are in progress at IEEE 802.15 committee. In developing UWB positioning system, we should consider the synchronization of sensor network, positioning algorithm, sensor allocation, and so on. This paper presents a comparison of TDOA positioning algorithms that are widely used in location systems. Two algorithms are compared; one is derived by linearization, and the other is by analytic solution(CH algorithm). Simulation results show that the CH algorithm is superior to the linearized least square at indoor environment in that CH algorithm shows consistent positioning performance regardless of the visibility and geometry of basestations.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.251-255
• /
• 2019

The QR codes are printed in sticker form and have many advantages in terms of location recognition accuracy or installation cost compared to the location recognition method, which attaches artificial indicators to ceilings or walls for low-cost location recognition, and the way in which the location is recognized by vision, to create robots that are generally applicable to all industries. In this study, it is shown that the two-dimensional square bar code applied to the robot within 3 mm of error allows the robot to be made with high accuracy and accurate location control. In particular, the fusion research, combined with various engineering technologies, describes QR code-aware indoor mobile robot control research centered on the construction of the system.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.90-94
• /
• 2014

This paper suggests the system that allows nearby firefighters to read about the transmission direction of a distress signal and track the location by RSSI of received distress signal which is transmitted wirelessly after sensing the distress signal of a firefighter using the Wireless Sensor Network(WSN) based on IEEE 802.15.4 and Received Signal Strength Indicator(RSSI) in the building. Also, It was confirmed that the location tracking using RSSI is possible because the difference between theoretical value and experimental value is little when experiment using the proposed system.