• Korean Journal of Human Ecology
• /
• v.21 no.6
• /
• pp.1235-1250
• /
• 2012

This study is to investigate the housing conditions and housing satisfaction of Chinese students in S. Korea, and identified effective factors for related housing design. Chinese students at CBNU participated in this survey from November to December in 2011. A questionnaire survey was used. 200 students voluntarily participated in this survey with 147 surveys providing useful data for analysis. Descriptive statistics, correlation, and linear regression were used to analyzed the data with SPSS 12.0. The results are as follow. 1) Many Chinese students received housing information from discussion with acquaintance. They lived together 2 students in one-room or dormitory. Monthly rental was about 240,000 won, and they found the living conditions a burden. 2) They are unsatisfied with food, the lack of a refrigerator, and non availability kitchen facilities. These factors are considered in planning for Chinese students housing. 3) For the most part, they are satisfied with their current housing environment, although there is a need to improve health related housing environment factors, including sunlight, noise, and indoor air. The effective residential factors to overall housing satisfaction are dwelling space and size, space organization and floor plan, kitchen toilet bathroom facilities, sunlight, and safety from natural disasters. The effective neighborhood factors identified include access to natural environment, community facilities, parks, noise, and commuting time. 4) Subjective factors played a larger role in overall housing satisfaction than did objective factors such as gender and types of house.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.8
• /
• pp.51-58
• /
• 2018

G-SEED has been introduced with the aim of reducing energy use and resources since 2002, as the system of certificating environmental friendliness of buildings to create comfortable environment. This study analyzed the changes of certification standard of G-SEED since the revision in 2016, comparing certification results of office buildings by grade, category and certification items between G-SEED 2013-2 version and revised version of 2016. Also, this study analyzed the average points and their standard deviation of certification items including both deleted items and newly added items and extracted items needed to be reviewed in the future revision. In the revision, G-SEED has been extended its certification system to involve existing buildings and Innovative Design categories newly introduced with revising the certification items and difficulties. In revised version of G-SEED, the certification grade appeared to change its acquisition ratio decreasing Green2 and increasing Green4, during Green1 and Green3 were similar in proportion. The average scores by categories appeared decrease in Energy and Environmental Pollution category and Materials and Resources category, on the other hand, Maintenance category appeared the highest increase in the average score. Otherwise, Land Use and Transportation, Water Circulation, Ecology, Indoor Environment categories appeared similar average scores both version of G-SEED. In addition, the Innovative Design which was newly introduced category, seems to expect gradual gaining high scores according to technology development in future, although its possession has shown lower scores in revised version.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.299-306
• /
• 2019

In this study, a model experiment that simulates the behaviour of the ground composed of several compacted layer was intended to measure the loosened area in the event of a ground cavity through a LAD (Loosened area detector). It was confirmed that the size of the cone diameter was affected by the ground composed of fine grain + granulated soil layered through the model soil. In order to select the appropriate cone type, a scale effect experiment was conducted. From the test results, a micro-cone was chosen for the most suitable indoor model experiment. In the case of applying LAD in this study, the loosening condition of the ground was determined by the rapid change in penetration resistance caused by the difference in the boundary surface and relative density due to the compaction of the ground for indoor model testing. The range of loosened area occurring in the cavity was estimated through the penetration resistance characteristics on the ground, and the failure area was identified through the reduction rate of penetration resistance in the loosening area.

• Hwankyungkyoyuk
• /
• v.3 no.1
• /
• pp.141-152
• /
• 1992

The purpose of this study is to search for the ways to diversify Outdoor/Environmental Education Program in the Nature Study Center(NSC), especially for the middle school students. For this study, various research methods such as literature review, questionnaire survey (448 students, 11 middle school teachers, 19 NSC staffs), interview and participant observation are used the process of this study consists of two steps. The first step is to define research questions through pilot survey and the second is to investigate the research questions, in the form of hypotheses through main survey. Nine hypotheses are formulated. Six are related with program elements (educational goals, student characteristics, staff resources, teaching methods, instructional resources, contents). three are related with program implementation process(preplan, implementation, post-evaluation). The hypotheses are tested and alternatives for program improvement are proposed. 1. Educational goals : Educational goals of NSC should be focused on Outdoor /Environmental Education and each NSC should specialize on its own theme. The objectives of every sub-program should be unified toward educational goals. 2. Student characteristics: The Outdoor/Environmental Education Program should reflect student characteristics: sex, urban/rural origins, normal/handicapped, number of visit and so on. 3. Staff resources : Provide qualified staff with professional knowledge and positive attitudes, reeducate staffs periodically, reduce management staff and increase teaching staffs. Provide permanent and well paid position, encourage and give opportunities and the middle school teachers to participate in program. 4. teaching method: Increase outdoor classes two way communication between teaching staffs and students adopt more open ended teaching method so that students can exercise coworks in small groups. 5. Instructional resources: Diversify NSC sites(mountains, coastal areas, urban areas and so on), teaching media (audio/visual equipments, graphic design of signs). Consider design for handicapped and integrate indoor and outdoor educational facilities. Plan nature trails with separate themes, allign nature trail so that it passes through diverse environments. 6. Content : Reflect characteristic site potential specialize on day or night program, on seasonal program, and on site specific social issues(such as interpreting of environmental damages around the NSCs). 7. Preplan: Get Information and know about visiting students in advance. Discuss with middle school teachers and adjust program weeks before visits if many or all of the students had already visited a NSC. arrange a visit to other NSC. Provide an introductory class for the teachers and students before they visit a NSC. 8. Implementation: During NSC visit and classes apply various and appropriate techniques to collect in formation for later evaluation. Improve NSC provided evaluation sheet so as to reflect student characteristic. Compare with formal education and investigate on effects of NSC program. 9. Post-evaluation: Formalize a post-evaluation process and organization. During the winter vacation, develop new programs based on the post-evaluationacation, for the next year. Also, have comparative evaluation meetings of staff from various NSCs during the winter vacation while there is no visitors and classes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1826-1829
• /
• 2005

Recent advancement in wireless communications and electronics has enabled the development of low power sensor network. Wireless sensor network are often used in remote monitoring control applications, health care, security and environmental monitoring. Wireless sensor networks are an emerging technology consisting of small, low-power, and low-cost devices that integrate limited computation, sensing, and radio communication capabilities. Sensor network platform for health care has been designed, fabricated and tested. This system consists of an embedded micro-controller, Radio Frequency (RF) transceiver, power management, I/O expansion, and serial communication (RS-232). The hardware platform uses Atmel ATmega128L 8-bit ultra low power RISC processor with 128KB flash memory as the program memory and 4KB SRAM as the data memory. The radio transceiver (Chipcon CC1000) operates in the ISM band at 433MHz or 916MHz with a maximum data rate of 76.8kbps. Also, the indoor radio range is approximately 20-30m. When many sensors have to communicate with the controller, standard communication interfaces such as Serial Peripheral Interface (SPI) or Integrated Circuit ($I^{2}C$) allow sharing a single communication bus. With its low power, the smallest and low cost design, the wireless sensor network system and wireless sensing electronics to collect health-related information of human vitality and main physiological parameters (ECG, Temperature, Perspiration, Blood Pressure and some more vitality parameters, etc.)

• Journal of the Korean housing association
• /
• v.3 no.1
• /
• pp.85-92
• /
• 1992

A floor system have played a major part in the living in Korean house. It is an essential element in the residential houses. Uufortunately, a design method of the floor heating system for the human thereat comfort has not established in Korea system. This paper aims to review the previous researches to find the issue for the futher study of comfort floor heating design. The following results were obtained: 1) Nevins et at conducted experiments on the effect of the comfortable of floor and air temperatures on the psychological responses by a large number of subjects. Its objective was to find the combined condition to obtain thermal comfort for sedentary posture.7here has never been researches regarding a sitting Person on the heated floor. 2) Some investigation in Japan on the effect of floor heating system on a sitting person on the floor have been conducted for these years, but they are net based on the human heat balance but on only psychological responses. 3) Hirayama et al developed an indication method of the effect of heat conduction on the sedentary person.4) There are few researches on the human thermal comfort compared whth indoor environmental researches on mechanical controls in Korea. Thus, the further study on the followings in needed the estimaiing of heat conduction between tile hunman body and a floor, developing an index expressed the combined effect of convection, radiation and conduction and its associated experiments.

• KIEAE Journal
• /
• v.11 no.1
• /
• pp.47-55
• /
• 2011

Daylight is highly beneficial for improving the indoor environmental quality and reducing building energy consumption, daylighting applications are scarcely considered, especially during the Rural standard house models design process, because of lack of previous studies on elderly-light environment and complex simulation process. Therefore, daylighting process were performed using ECOTECT, which has various advantage such as easy user interface and simple simulation processes. Moreover, dynamic daylight simulation were performed using whether data. Static simulation are performed to compute static metrics such as daylight factor, whereas dynamic simulation are performed for dynamic metrics such as daylight autonomy and useful daylight illuminance using annual weather data On the basis of daylight autonomy and useful daylight illuminance analysis result, variations in annual daylight performances. A parametric and regression analysis of the window-to-wall ratio and visible transmittance showed that daylight factor, daylight autonomy increased with window-to-wall ratio and visible transmittance. It can be concluded that this new daylight criteria. useful daylight illuminance, will enable architect to obtain better fenestration design.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.17 no.1
• /
• pp.33-40
• /
• 2011

Daylight is highly beneficial for improving the indoor environmental quality and reducing building energy consumption, daylighting applications are scarcely considered, especially during the care facility design process, because of lack of previous studies on elderly- light environment and complex simulation process. Therefore, daylighting process were performed using ECOTECT, which has various advantage such as easy user interface and simple simulation processes. Moreover, dynamic daylight simulation were performed using whether data. Static simulation are performed to compute static metrics such as daylight factor, whereas dynamic simulation are performed for dynamic metrics such as daylight autonomy and useful daylight illuminance using annual weather data On the basis of daylight autonomy and useful daylight illuminance analysis result, variations in annual daylight performances. A parametric and regression analysis of the window-to-wall ratio and visible transmittance showed that daylight factor, daylight autonomy increased with window-to-wall ratio and visible transmittance. It can be concluded that this new daylight criteria. useful daylight illuminance, will enable architect to obtain better fenestration design.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.59-67
• /
• 2024

Current straw mushroom farming in countries with large rice growing areas has great development potential, and was once considered a way to generate additional income and reduce poverty in rural areas. However, currently most people still grow mushrooms using traditional processes, leading to low productivity and unguaranteed output quality. Currently, due to climate change and unusual weather changes, people tend to switch to growing straw mushrooms indoors. In the process of growing straw mushrooms indoors, the design of an automatic control and monitoring system is very important to ensure the growing process is carried out effectively and achieves high yields. In this paper, we propose a system that can automatically control and monitor the humidity and temperature of the indoor straw mushroom growing process and other parameters that can be monitored through a network system using Internet of Things. The control algorithm automatically adjusts the grow house equipment based on feedback from sensors to maintain an optimal environment for growing straw mushrooms. Experimental results show that the straw mushroom growing system with automatically controlled and monitored environmental parameters helps improve efficiency, reduce costs and increase the sustainability of the current straw mushroom growing industry.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.11-20
• /
• 2010

User-oriented Design is necessary in planning the interior design of Metropolitan Railroads trains, since this is a typical means of transportation in this modem society and all ages people with different body scale use this facility. However, there are little studies about facility panning and zoning of Metropolitan Railroads train considering users. Therefore, in this study, after completing the checklist based on the current legal standards of facility installation of South Korea and Japan, we examined user's facility and suggest several improvement of the opening 14 metropolitan railroad lines in Seoul. Then, we evaluated this facilities according to 41 standards; general facility(24 standards), safety facility(4 standards), guide facility(11 standards), other facility(4 standards). The result of this study may be summarized as follows. 1) General facility has to be designed to obtain lots of room for storage and this facility should be fixed up tightly with secure system. 2) Safety facility should be designed to minimize a difference of floor-level between threshold of train and ground. Also, using various color and material could help passengers to distinguish different space and facility. 3) Guide facility should be designed to guide passengers to the accurate direction with proper sign design in the pathway of Metropolitan railroad train. Also, more various color, which based on the research about physiological and psychological effect, should be used to guide people. 4) Other facility should equip more visual system using common good and informative contents. Through this study, we try to understand the current interior physical condition of Metropolitan Railroads trains. However, for future studies, it is expected to supplement evaluation standards considering aesthetic design, environmental improvement of indoor air quality and the satisfaction and demand of Metropolitan Railroads trains.