• Journal of the Korean Society for Library and Information Science
• /
• v.12
• /
• pp.87-120
• /
• 1985

The present study aims at identifying the nature of the organizational patterns for serial management and thus providing an assitance for decision-making in regards to how the serials in an individual library be processed. The premise of the paper is that effective management is ensued from adopting proper organizational arrangement. In the first part. attempts are made to bring to the fore the problems inherent in serial management and the efforts made for possible solutions. The main portion of the paper eximines the two outstanding patterns; namely, the decentralized arrangement patterned after the traditional functions of a library and the centralized one integrating such functions as acquisition, cataloging and information service. Both are examined in light of nature, development, applicability, strengths and weeknesses. Automation is viewed as a strong force for a change in organizing serial work as it has already brought about organizational change in some large libraries. The general conclusion is that a large collection(5,000 active titles or more) has much to benefit from a separate, specialized department. which integrates the related functions; and the smaller collection can be effectively treated like the rest of the library materials, assigning a specific unit responsible for serial work and promoting an informal communication activities which would bring about coordination and coorperation for the free flow of serial work.

• Journal of Hydrogen and New Energy
• /
• v.28 no.5
• /
• pp.481-491
• /
• 2017

In this study, we developed 300 W lightweight DMFC system for charging secondary battery in small unit military operation. In order to reduce the volumetric shape and weight of the system considering the environment of the individual soldier's, the arranging of system components has been optimized. A metal bipolar plates made of STS-470FC have been implemented to the DMFC stack to meet the weight demand of the system. As a result of the performance test of the stack, the target value was satisfied by outputting 561 W exceeding 24% of the stack output 450 W required to output 300 W required for the entire system. Moreover, 2,655 hours exceeding 1,000 hours also has been satisfied. To ensure good robustness of the metallic bipolar plate based DMFC stack, finite element method based simulations are conducted using a commercial ANSYS Fluent software.

• Journal of Periodontal and Implant Science
• /
• v.27 no.1
• /
• pp.263-290
• /
• 1997

Homogenization technique is employed to investigate the series of stress analyses of mandible for three different types of dental implants. This technique helps to make proper material model of bone and analyze such a non homogeneous structure at the level of individual microstructural unit. The stress analyses with homogenization technique show much higher stress level in the sponge bone, compared to those of conventional FEM. It also manifested that even a minor lateral force results in crucial stresses in the dental implant system and that the macroscale model should take the shape and size after real mandible to produce reasonable solution in the analyses of dental implant systems. The shapes of dental implants simulated in this study are rectangular-cross-sectioned type, hemi-sphere rooted type, and wedge type implant. The stress states of mandible with hemisphere rooted type implant and wedge type implant show similar levels, while those with sectioned rectangular implant results in higher stresses. It is suggested that the distance between the implant tip and cortical bone be kept far enough to prevent stress concentrations in the mandible.

• Geomechanics and Engineering
• /
• v.10 no.3
• /
• pp.257-267
• /
• 2016

Charts are used extensively in slope practical application to meet the need of quick assessment of rock slope design. However, Charts for estimating the shear strength of the rock mass of a slope are considerably limited. In this paper, based on the Hoek-Brown (HB) criterion which is widely used in rock slope engineering, we present charts which can be used to estimate the Mohr-Coulomb (MC) parameters angle of friction ${\phi}$ and cohesion c for given slopes. In order to present the proposed charts, we firstly present the derivation of the theoretical relationships between the MC parameters and ${\sigma}_{ci}/({\gamma}H)$ which is termed the strength ratio (SR). It is found that the values of $c/{\sigma}_{ci}$ and ${\phi}$ of a slope depend only on the magnitude of SR, regardless of the magnitude of the individual parameters ${\sigma}_{ci}$(uniaxial compressive strength), ${\gamma}$(unit weight) and H (slope height). Based on the relationships between the MC parameters and SR, charts are plotted to show the relations between the MC parameters and HB parameters. Using the proposed charts can make a rapid estimation of shear strength of rock masses directly from the HB parameters, slope geometry and rock mass properties for a given slope.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.429-435
• /
• 2010

Although recently revised building code requires 15~20% increased thermal insulation performance for window systems, since the code is focusing on winter heat loss, it is not satisfactory to contribute on reducing rapidly rising cooling load in summer. Window systems have great impact on building heat gain and loss. Therefore technological development for window system specialized in shading solar gain in summer is an urgent matter. This study evaluates the performance of sun shading and thermal insulation for blind integrated window system. Also, computer simulation evaluates the effect of heating and cooling energy consumption reduction for an individual unit(floor area of $85m^2$) of a multi-family housing. Physibel Voltra, a heat transfer analysis software, was used to analyse the effect of energy consumption reduction, and the energy load was converted to the cost to compare the actual effect of economical benefit.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.2
• /
• pp.281-285
• /
• 2006

Microbial fuel cells (MFC) stacked with bipolar plates have been constructed and their performance was tested. In this design, single fuel cell unit was connected in series by bipolar plates where an anode and a cathode were made in one graphite block. Two types of bipolar plate stacked MFCs were constructed. Both utilized the same glucose oxidation reaction catalyzed by Gram negative bacteria, Proteus vulgaris as a biocatalyst in an anodic compartment, but two different cathodic reactions were employed: One with ferricyanide reduction and the other with oxygen reduction reactions. In both cases, the total voltage was the mathematical sum of individual fuel cells and no degradation in performance was found. Electricity from these MFCs was stored in a supercapacitor to drive external loads such as a motor and electric bulb.

• The Mathematical Education
• /
• v.54 no.3
• /
• pp.283-298
• /
• 2015

This research is the case study of collaborative mentoring in the professional development of multi-tiered mathematics teacher community. We observed the procedures of mentoring, and contents of mentoring in PD program. For this purpose, we implemented PD program with participant unit composed of 3 or 4 teachers in the same school and total 25 teachers from 4 elementary schools and 4 high schools. Also there were 1 mentor and 1 sub-mentor to support each school. Observed mentoring processes were all recorded and the participants not only were interviewed several times but also wrote reflection notes after meetings. While mentoring PD program was implemented, mentor and mentee had joint responsibility about lessons implemented by mentee. Furthermore It showed possibility of change of teacher learning culture, learning culture of community. It means that teacher would improve their professionalism more effectively within teacher community instead of individual. 4 reflection contents was founded in collaborative mentring; 1)purpose of mathematics education, 2)motivation and connection between previous lecture and present lecture 3)lack of mathematical contents in lesson 4)discourse between teacher and students.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.1 s.232
• /
• pp.9-15
• /
• 2005

From the geometric parameter study, an optimal ejector design procedure of pressure recovery system for chemical lasers was acquired. For given primary flow reservoir conditions, an up-scaled ejector was designed and manufactured. In the performance test, secondary mass flow rate of 100g/s air was entrained satisfying the design secondary pressure, $40{\sim}50torr$. Performance validation of a supersonic ejector system along with an investigation of effects of supersonic diffuser was conducted. Placement of the diffuser at the secondary inlet further reduced diffuser upstream pressure to 7torr. Lastly, the duplicate of apparatus (air 500g/s secondary mass flow rate each) was built and connected in parallel to assess proportionality behavior on a system to handle larger mass flow rate. Test and comparison of the parallel unit demonstrated the secondary mass flow rate was proportional to the number of individual units that were brought together maintaining the lasing pressure.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1246-1249
• /
• 1994

Thin amorphous film of $a-Se_{75}Ge_{25}$ acts as a positive resist in ion beam lithography. Previously, we reported the optical characteristics of amorphous $Se_{75}Ge_{25}$ thin film by the low-energy ion beam exposure and presented analytically calculated values such as ion range, ion concentration and ion transmission coefficient, etc. As the calculated results of analytical calculation, the energy loss per unit distance by $Ga^+$ ion is about $10^3[keV/{\mu}m]$ and nearly constant for all energy range. Especially, the projected range and struggling for 80 [KeV] $Ga^+$ ion energy are 0.0425[${\mu}m$] and 0.020[${\mu}m$], respectively. Hear, we present the results of Monte-Carlo computer simulation of Ga ion scattering, exposure and development in $a-Se_{75}Ge_{25}$ resist film for focused ion beam(FIB) lithography. Monte-Carlo method is based on the simulation of individual particles through their successive collisions with resist atoms. By the summation of the scattering events occurring in a large number N(N>10000) of simulated trajectories within the resist, the distribution for the range parameters is obtained. Also, the deposited energy density and the development pattern by a Gaussian or a rectangular ion beam exposure can be obtained.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.2
• /
• pp.105-115
• /
• 1994

This study was conducted to assess the health risk of carcinogenic heavy metals such as arsenic, nickel, chromium and cadmium Ambient concentrations of these metals were measured bimonthly, during May 1987 to March 1988. Respirable Particle concentrations of As, Ni, Cr, Cd in traffic area(Shinchon) were 16ng/㎥, 43ng/㎥, 4.2ng/㎥, 6.6ng/㎥, respectively, and in residential area(Bulkwang) were 25ng/㎥, 32ng/㎥, 4.7ng/㎥, 8.9ng/㎥, respectively. Carcinogenic risk of each metal was calculated by multiplication of ambient concentration and unit risk of the metal which was referred to recent version of Integrated Risk Information System(IRIS). Sum of the risk from these for metals was 9.8$\times$10$^{-5}$ as individual risk in traffic area and 13.9$\times$10$^{-5}$ in residential area.