• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.230-235
• /
• 2011

COMS (Communication, Ocean and Meteorological Satellite) is a geostationary satellite and was developed by KARI for communication, ocean and meteorological observations. COMS was tested under vacuum and very law temperature conditions in order to correlate thermal model and to verify thermal design. The test was performed by using KARI large thermal vacuum chamber. The COMS S/C thermal model was successfully correlated versus the 2 thermal balance test phases. After model correlation, temperatures deviation of all individual unit were less than $5^{\circ}C$ and global deviation and standard deviation also satisfied the requirements, less than $2^{\circ}C$ and $3^{\circ}C$. The final flight prediction was performed by using the correlated thermal model.

• Asian Oncology Nursing
• /
• v.12 no.1
• /
• pp.100-109
• /
• 2012

Purpose: This study was done to understand the meanings and nature of experiences of the burnout of nurses working in oncology wards. Methods: The hermeneutic phenomenology developed by van-Manen was used. The period for data collection was from November, 2006 to May, 2007. This study took place in 3 university hospitals in B & U cities. Nine nurses working in oncology wards participated. Data collection was done through individual in-depth interviews. Results: The eight most common themes demonstrated by participants from this study were 'being fed up with endless demands', 'collapsing in front of deaths', 'gasping for breath due to overwhelming tasks', 'uncontrollable suffering of body', 'gradually loosing self-esteem', 'frustration from the work world', 'beleaguered relationships', and 'desire to escape'. Conclusion: The results of this study indicate that there is a need to develop a preventive burnout program for nurses working in oncology wards.

• Journal of Distribution Science
• /
• v.12 no.12
• /
• pp.5-17
• /
• 2014

Purpose - The purpose of this study is to examine the possible ways to minimize damage by analyzing the influence that may be exerted upon the business process of the distribution industry by unexpected climate change. Research design, data, and methodology - The optimum business process is to be implemented after dividing the diversified business process of the distribution industry into the four stages of the Business Continuity Plan (BCP). Results - First, the upper-level risks that would be impacted most sensitively by climate change have been selected. Second, the impact and characteristics of the environment have been discovered. Third, weighted values by criteria item of upper-level business risks have been analyzed. Fourth, it was possible to define the business priority order based on the individual and then to adjust the Recovery Time Objective (RTO). Conclusion - In this study, the priority order has been defined quantitatively by calculating the priority order score. Further, the priority order has been determined depending on whether any targeted business unit is applicable to the items of the business nature criteria.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.33-33
• /
• 2000

In this paper a new distributive control system for BA(Building Automation ) lighting control used on general microprocessors is presented. For optimal lighting control and saving energy, The system have to control the group and pattern lighting control as well as individual light control at one time. Tn this paper, This functions are accomplished with low-cost and simple microprocessor. A plurality of modulated light control terminals are connected to the central control unit through a pair of power line. This power line provide both power and signal to the each terminal and the data is transmitted through cyclic time division multiplex transmission. With this structure a low-cost distributive control system for lighting applications has been achieved, allowing energy and maintenance saving and reliability increase of the light control system.

• The Korean Journal of Applied Statistics
• /
• v.25 no.4
• /
• pp.661-668
• /
• 2012

For displaying multivariate numerical data on a 2D plane by the projection, principal components biplot and the GGobi are two main tools of data visualization. The biplot is very useful for capturing the global shape of the dataset, by representing $n$ observations and $p$ variables simultaneously on a single graph. The GGobi shows a dynamic movie of the images of $n$ observations projected onto a sequence of unit vectors floating on the $p$-dimensional sphere. Even though these two methods are certainly very valuable, there are drawbacks. The biplot is too condensed to describe the detailed parts of the data, and the GGobi is too burdensome for ordinary data analyses. In this paper, "the local projective display(LPD)" is proposed for visualizing multivariate numerical data. Main steps of the LDP are 1) $k$-means clustering of the data into $k$ subsets, 2) drawing $k$ principal components biplots of individual subsets, and 3) sequencing $k$ plots by Hurley's (2004) endlink algorithm for cognitive continuity.

• Textile Coloration and Finishing
• /
• v.16 no.2
• /
• pp.34-40
• /
• 2004

This study was conducted to remove the reactive dyes by the Ozone demand flask method which are one of the main pollutants in dye wastewater, Ozone oxidation of three kinds of the reactive dyes was examined to investigate the reactivity of dyes with ozone, Trihalomethane formation potentials(THMFPs), competition reaction and ozone utilization on various conditions for single- and multi-solute dye solution. Concentration of dyes was decreased continuously with increasing ozone dosage in the single-solute dye solutions. THMFPs per unit dye concentration were gradually increased with increase of ozone dosage. By the result of THMFPs change with reaction time, THMFPs were rapidly decreased within 1 minute in single-solute dye solutions. Dey were increased after 1 minute of reaction time, and then they were consistently decreased again after longer reaction time. Competition quotient values were calculated to investigate the preferential oxidation of individual dyes in multi-solute dye solutions. Competition quotients$(CQ_i)$ and values of the overall utilization efficiency, no$_3$, were increased at 40mg/1 of ozone dosage in multi-solute dye solutions.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.494-496
• /
• 2001

This paper describes sheath induced voltage and operating characteristic of cable cover protection unit(CCPU) in underground transmission cable. Real cable system operating by 154kV XLPE cable was modelled for simulation. Sheath induced voltage and operating characteristic of CCPU were analyzed. In particular, sheath induced voltage was analyzed in case of individual grounding and common grounding, respectively, and operating characteristics of CCPU were compared each other.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.90-95
• /
• 2003

For the safety driving of an automobile which is become individual requisites, a new Neural Network algorithm which recognized the load vehicles in real time is proposed. The proposed neural network technique is the real time computation method through the inter-node diffusion. In the network, a node corresponds to a state in the quantized input space. Each node is composed of a processing unit and fixed weights from its neighbor nodes as well as its input terminal. The most reliable algorithm derived for real time recognition of vehicles, is a dynamic programming based algorithm based on sequence matching techniques that would process the data as it arrives and could therefore provide continuously updated neighbor information estimates. Through several simulation experiments, real time reconstruction of the nonlinear image information is processed. 1-D LIPN hardware has been composed and various experiments with static and dynamic signals have been implemented.

• Safety and Health at Work
• /
• v.11 no.2
• /
• pp.244-247
• /
• 2020

The occurrence of the shift work disorder (SWD) in health-care workers (HCWs) employed in 24/7 hospital wards is a major concern through the world. In accordance with literature, SWD is the most frequent work-related disturb in HCWs working on shift schedules including night shift. In agreement with the Luxembourg Declaration on workplace health promotion (WHP) in the European Union, a WHP program has been developed in a large Hospital, involving both individual-oriented and organizational-oriented measures, with the aim to prevent the occurrence of SWD in nurses working on shifts including night shift. The objective assessment of rotating shift work risk and the excessive sleepiness were detected before and after the implementation of the WHP program, by using the Rotating Shiftwork-questionnaire and the Epworth Sleepiness Scale. The findings of this study showed the effectiveness of the implemented WHP program in minimizing the impact of shift work on workers' health and in preventing the misalignment between sleep-wake rhythm and shift working.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1069-1077
• /
• 2009

For external noise prediction of railway vehicles, sophisticated individual source modelling as well as appropriate noise propagation model from the sources is necessary to ensure the accuracy of the predicted results and contributions of each equipment to the overall noise levels. Accurate and reasonable identification procedures of sound sources of equipment including source strength, directivity and positions installed in the train play an important role in a prediction model, since it is not easy to establish a simple model for the sources with a single rule due to the complexity of source characteristics of equipment in size and directivity pattern. This paper guidelines practical considerations for identification of noise sources in railway vehicles including typical source characteristics of several sub-systems that emits noise to the environment, particularly for electric multiple unit(EMU), and verify effectiveness of assumptions used in the modelling of equipment by measurement with a simple part. The predicted external noise level of a complete train using Exnoise, which was developed by Hyundai-Rotem and has been verified in the a lot of field-tests, incorporating source modelling considered in this paper shows close correlation with the measured ones.