• Nutrition Research and Practice
• /
• 제9권3호
• /
• pp.319-327
• /
• 2015

BACKGROUND/OBJECTIVES: In nutritional epidemiology, collecting self-reported respondent height and weight is a simpler procedure of data collection than taking measurements. The aim of this study was to compare self-reported and measured height and weight and to evaluate the possibility of using self-reported estimates in the assessment of nutritional status of elderly Poles aged 65 + years. SUBJECTS/METHODS: The research was carried out in elderly Poles aged 65 + years. Respondents were chosen using a quota sampling. The total sample numbered 394 participants and the sub-sample involved 102 participants. Self-reported weight (non-corrected self-reported weight; non-cSrW) and height estimates (non-corrected self-reported height; non-cSrH) were collected. The measurements of weight (measured weight; mW) and height (measured height; mH) were taken. Using multiple regression equations, the corrected self-reported weight (cSrW) and height (cSrH) estimates were calculated. RESULTS: Non-cSrH was higher than mH in men on average by 2.4 cm and in women on average by 2.3 cm. In comparison to mW, non-cSrW was higher in men on average by 0.7 kg, while in women no significant difference was found (mean difference of 0.4 kg). In comparison to mBMI, non-cSrBMI was lower on average by $0.6kg/m^2$ in men and $0.7kg/m^2$ in women. No differences were observed in overweight and obesity incidence when determined by mBMI (68% and 19%, respectively), non-cSrBMI (62% and 14%, respectively), cSrBMI (70% and 22%, respectively) and pcSrBMI (67% and 18%, respectively). CONCLUSIONS: Since the results showed that the estimated self-reported heights, weights and BMI were accurate, the assessment of overweight and obesity incidence was accurate as well. The use of self-reported height and weight in the nutritional status assessment of elderly Poles on a population level is therefore recommended. On an individual level, the use of regression equations is recommended to correct self-reported height, particularly in women.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.280-280
• /
• 2010

Semiconductor quantum dots are of great interest for both fundamental research and industrial applications due to their unique size dependant properties. The most promising application of colloidal semiconductor nanocrystals (quantum dots or QDs) is probably as emitters in biomedical labeling, LEDs, lasers etc. As compared to II-VI quantum dots, III-V have attracted greater interest owing to their less ionic lattice, larger exciton diameters and reduced toxicity. Among the III-V semiconductor quantum dots, Indium Phosphide (InP) is a popular material due to its bulk band gap of 1.35 (eV) which is responsible for the photoluminescence emission wavelength ranging from blue to near infrared with change in size of QDs. Nevertheless, in recent years, the exact type of collective properties that arise when semiconductor quantum dots (QDs) are assembled into two- or three-dimensional arrays has drawn much interest. The term "uantum dot solids" is used to indicate three-dimensional assemblies of semiconductor QDs. The optoelectronic properties of the quantum dot solids are known to depend on the electronic structure of the individual quantum dot building blocks and on their electronic interactions. This paper reports an efficient and rapid method to produce highly luminescent and monodisperse quantum dots solution and solid through fabrication of InP thin films. By varying the molar concentration of Indium to Ligand, QDs of different size were prepared. The absorption and emission behaviors were also studied. Similar measurements were also performed on InP quantum dot solid by fabricating InP thin films. The optical properties of the thin films are measured at different curing temperatures which show a blue shift with increase in temperature. The dielectric properties of the thin films were also investigated by Capacitance-voltage(C-V) measurements in a metal-insulator-semiconductor (MIS) device.

• 한국전문물리치료학회지
• /
• 제8권2호
• /
• pp.55-63
• /
• 2001

For spinal flexibility measurements to be meaningful to clinicians or researchers, they must have a normative information and an understanding of how different variables affect spinal range of motion (ROM). Normal spinal ROM measurements are influenced to differing degrees by many factors. These factors include age, gender, time of day, leisure activities, previous history of low back pain, warming up, and the techniques with which normative data are collected. The additional variables of standing height, ratio of standing height to sitting height, and obesity had not been previously studied extensively and were shown to have a significant effect on flexibility in the sagittal plane. These relationship cannot be explained easily. Thus, the purpose of this study was to determine the relationship between spinal flexibility and individual factors (weight, standing height, and ratio of standing height to sitting height) that influence it. Fifteen healthy subjects between the ages of 20 and 27 years were studied. Two physical therapists measured independently the spinal forward bending ROM in the sagittal plane by Remodified Schober test and Finger-to-floor test. In order to determine the statistical significance of the result the Pearson's correlation was applied at the .05 level of significance. The results of this study were as follows: 1) Significant relationship was not identified between spinal flexibility and weight. 2) Significant relationship was not identified between spinal flexibility and standing height. 3) Significant relationship was not identified between spinal flexibility and ratio of standing height to sitting height.

• 한국의류산업학회지
• /
• 제8권1호
• /
• pp.99-106
• /
• 2006

With the growing interest in pet dogs and pet dog's wear I used this study to compare and analyze the pattern used by each supplier and developed a new pattern for pet dogs' wear which is appropriate for pet dogs' body lines and movement. Test subjects were 91 pet dogs in Busan and after comparing 3 patterns from different suppliers, I developed the pattern reflecting pet dogs' body shapes and movement. Results are as follows; 1) As a result of analyzing measurements, it was found that pet dogs motion in walking on four feet, is different from that of people on two feet. For center measurements, their waist to bust length is longer than their waist to back length. The result of analysis shows that bust circumference impacts most other measurement results and it seems that better results are achieved if the bust line is taken into consideration when measuring bust back length, bust front length, neck base circumference, front leg arc, the length between lateral shoulder etc. 2) As a result of comparing suppliers' patterns, it was discovered that each supplier has different sizes for the same patterns and those sizes are not standardized across the board. Even if the same size of pattern was actually used in the production of pet dogs' wear by the individual companies, there were many variations in size for each item. 3) To develop a more standard pattern of pet dogs' wear, I collected and analyzed 3 patterns from each supplier and designed a new pattern, revising it three times. After test-wearing of the experimental pattern and the studied patterns, and comparing and analyzing the results, the studied pattern had similarly better estimation than the experimental one.

• 치과방사선
• /
• 제15권1호
• /
• pp.75-83
• /
• 1985

Bitewing and periapical radiographic techniques are used in clinical and epidemiological studies to assess crestal alveolar bone levels. The purpose of the present study investigated relationships between these techniques by assessing alveolar crest location at the same site. Bitewing and periapical radiographs were available from posterior quadrants of 120 subjects. The distance from cemento-enamel junction to the alveolar crest (CEJ -CR) was measured for each proximal surface from the distal of the cuspid to the distal of the second molar. Data were arranged according to the proximal surface examined, and bitewing and periapical measurements were compared using paired tests. The obtained results were as follows; 1. In maxilla, a significant t ratio with a P value of 0.05 or less was reached for 78% and in mandible reached for 39%. 2. Pearson correlations were calculated 32 surfaces (89%) had values below 0.70 and so, data obtained by these techniques can not be used interchangeably on an individual or group basis. 3. In situations where the periapical measure was greater than the bitewing, it ranged up to 20.7% greater with a mean 9.8%. Where the bitewing was greater than periapical, it ranged up to 51. 9% greater, with a mean 18.2%. 4. The percentage difference was greater in maxillary posterior areas than in mandibular molar, premolar areas. A lower prevalence of significant differences was attributed to relatively more simple root and favorable radiographic conditions in mandibular molar and premolar areas. 5. The anatomical limitations imposed on periapical radiographic technique, most often result in somewhat foreshortened radiographic images. This situation would tend to be accentuated by the anatomical restrictions of the hard palate. 6. Consequently, since the significant differences frequently exist between measurements obtained from bitewing and periapical techniques, it is important to define which technique is used.

• 한국환경보건학회지
• /
• 제31권2호
• /
• pp.120-126
• /
• 2005

To assess exposure of allergy patients to a biological environment, measurements were made of levels of airborne bacteria and fungi, house dust endotoxin and mite allergens in homes of 7 allergy patients and 12 healthy families. Concentrations of airborne total bacteria and the ratio of indoor and outdoor concentrations(I/O) in allergy patient's homes were high compared to non-allergy houses. But no significant differences could be shown for the concentration of spores of viable fungi and staphylococcus in indoor air between the homes of allergic patients and healthy families. The results of investigation on house dust mites, Dermatophagoids farinae were detected in all mattress samples and the levels in the allergy patient's homes were generally high, with individual measurements exceeding $2{\mu}g/g$ dust found in $30\%$ samples. In contrast with, Dermatophagoids pteronyssinus were detected in only $60\%$ samples and the concentrations were very low. The levels of endotoxin in dust samples collected from the allergy patient's home mattresses were higher than those of control houses. There was a positive correlation between the endotoxin levels and the house dust mite allergens.

• 대한방사선치료학회지
• /
• 제10권1호
• /
• pp.11-22
• /
• 1998

The absolute absorbed dose can be determined according to the measurement conditions ; measurement material, detector, energy and calibration protocols. The purpose of this study is to compare the absolute absorbed dose due to the differences of measurement condition and calibration protocols for photon beams. Dosimetric measurements were performed with a farmer type PTW and NEL ionization chambers in water, solid water, and polystyrene phantoms using 6MV photon beams from Siemens linear accelerator. Measurements were made along the central axis of $10{\times}10cm$ field size for constant target to surface distance of 100cm for water, solid water and polystyrene phantom. Theoretical absorbed dose intercomparisons between TG21 and IAEA protocol were performed for various measurement combinations on phantom, ion chamber, and electrometer. There were no significant differences of absorbed dose value between TG2l and IAEA protocol. The differences between two protocols are within $1\%\;while\;the\;average\;value\;of\;IAEA\;protocol\;was\;0.5\%$ smaller than TG2l protocol. For the purpose of comparison, all the relative absorbed dose were nomalized to NEL ion chamber with Keithley electrometer and water phantom, The average differences are within $1\%,\;but\;individual\;discrepancies\;are\;in\;the\;range\;of\;-2.5\%\;to\;1.2\%$ depending upon the choice of measurement combination. The largest discrepancy of $-25\%$ was observed when NEL ion chamber with Keithley electrometer is used in solid water phantom. The main cause for this discrepancy is due to the use of same parameters of stopping power, absorption coefficient, etc. as used in water phantom. It should be mentioned that the solid water phantom is not recommended for absolute dose calibration as the alternative of water, since absorbed dose show some dependency on phantom material other than water. In conclusion, the trend of variation was not much dependent on calibration protocol. However, It shows that absorbed dose could be affected by phantom material other than water.

• 한국기계가공학회지
• /
• 제18권4호
• /
• pp.100-108
• /
• 2019

In this paper, a new stacked element pressure sensor has proposed for heartbeat and respiration measurement. This device can be directly attached to an individual's chest; heartbeat and respiration are detected by the pulsatile vibration and deformation of the chest. A key feature of the device is the simultaneous measurement of heart rate and respiration. The structure of the sensor consists of two stacked elements, in which one element includes one polyvinylidene fluoride (PVDF) thin film bonded on polydimethylsiloxane (PDMS) substrate. In addition, for the measurement and signal processing, the electric circuit and the filter are simply constructed with an OP-amp, resistance, and a capacitor. One element (element1, PDMS) maximizes the respiration signal; the other (element2, PVDF) is used to measure heartbeat. Element1 and element2 had sensitivity of 0.163V/N and 0.209V/N, respectively, and element2 showed improved characteristics compared with element1 in response to force. Thus, element1 and element2 were optimized for measuring respiration heart rate, respectively. Through mechanical and vivo human tests, this sensor shows the great potential to optimize the signals of heartbeat and respiration compared with commercial devices. Moreover, the proposed sensor is flexible, light weight, and low cost. All of these characteristics illustrate an effective piezoelectric pressure sensor for heartbeat and respiration measurements.

• 복식문화연구
• /
• 제29권4호
• /
• pp.471-487
• /
• 2021

The purpose of this study was to analyze changes to body measurements and silhouettes after wearing an early 19th century women's corset. Two types of corsets were tested. Changes in body size and silhouette were compared based on the levels of tightening strength of the corset. The tightening strength was adjusted in 4 steps by making the length of back fastening string 10-40 cm shorter than the standard. The silhouette was compared with the front silhouette and the side silhouette. The results were as follows. After wearing the experimental 19th century corsets, the chest circumference and front interscye length increased. However, the chest circumference did not increase proportionally to the tightening strength. The underbust circumference, waist circumference, and back interscye length also decreased. The waist width was decreased to create a slim front silhouette. The change in the body silhouette differed depending on the style of the experimental corset. The experimental corset made with the six-piece torso pattern changed the posture so that the shoulders were pulled back and the chest was pushed forward. The experimental corset with the side bodice pattern resulted in the subject's shoulders reclining backward and the chest and abdomen extending forward. The results of this study show that women's body sizes and silhouettes could be changed by wearing the early 19th century corsets, but the changes in body size and silhouette vary depending on the wearer's individual body type or corset style.

• 한국의류산업학회지
• /
• 제24권4호
• /
• pp.460-470
• /
• 2022

Customized cosmetics are emerging as a consumer product that companies should pay attention to in the beauty industry due to the combination of market trends and institutional introduction of customized cosmetics. In this study, six offline service brands and online service brands currently in Korea were selected to understand the current status of domestic customized cosmetics online and offline services and to derive detailed characteristics, and the cases of each brand were analyzed. The results are as follows. First, customized cosmetics services could be classified online and offline. Second, customized cosmetics brands could be divided into general brand types and brand extension types. Third, skin data measurements could be classified into genetic analysis, big data-based surveys, and device measurements. Fourth, customized cosmetics manufacturing could be classified into a device manufacturing system, a consultant manufacturing system, and an individual production process system. Fifth, customized cosmetics distribution and delivery could be classified into same-day sales, general delivery, and regular delivery. The results of this study are meaningful in that they have identified and analyzed the current status of personalized cosmetics on-line and offline systems in recent trends, and it was confirmed that creative attempts in the domestic customized cosmetics market continue to change. It is hoped that this study will provide information and ideas to the beauty industry and related experts in the future and be used as basic data for customized cosmetics marketing